openstack team mailing list archive

[Daniel Oliveira <dvalbrand@xxxxxxxxx>]

My glance-api-paste.ini already had the credentials when I posted the
problem. Also, my python-glance package is Essex, just like the other
openstack packages. After giving *glance -d index* as input, I noticed
something that's pretty much obvious: The error comes from the response to
the attempt at authenticating the user. I'm gonna double-check the
credentials in the config files, then gonna report here.

2012/10/4 Jon Thomas <jthomas@xxxxxxxxxx>

> On Thu, 2012-10-04 at 11:41 -0500, Ahmed Al-Mehdi wrote:
> > Hi Janis,
> >
> >
> > Just fyi, in the Folsom release the lines with the "%…%" in
> > glance-api.conf  and glance-api-paste.ini are not present.  Document
> > instructs user to add the three relevant lines to [filter.authtoken]
> > section.
> >
> It looked to me that there were some config file changes in folsom.
>
> glance index works fine for me and I have in glance-api-paste.ini
>
> [filter:authtoken]
> paste.filter_factory = keystone.middleware.auth_token:filter_factory
> delay_auth_decision = true
> admin_tenant_name = service
> admin_user = glance
> admin_password = servicepass
>
> and in glance-api.conf there is no [filter:authtoken]. However there is
> [keystone_authtoken], but it's unchanged
>
> [keystone_authtoken]
> auth_host = 127.0.0.1
> auth_port = 35357
> auth_protocol = http
> admin_tenant_name = %SERVICE_TENANT_NAME%
> admin_user = %SERVICE_USER%
> admin_password = %SERVICE_PASSWORD%
>
> Another possiblity for the 500 error might be that the
> python-glanceclient package is essex, not folsom. I had a 500 error with
> nova that was due to the python-novaclient package being essex, while
> nova packages were folsom.
>
> >
> > Regards,
> > Ahmed.
> >
> >
> >
> > From: J?nis ?e??eris <janis.gengeris@xxxxxxxxx>
> > Date: Thursday, October 4, 2012 7:24 AM
> > To: Daniel Oliveira <dvalbrand@xxxxxxxxx>
> > Cc: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>
> > Subject: Re: [Openstack] Just a newbie getting some error messages
> >
> >
> >
> > When you have fresh install you will usually have something like this
> > in glance-api.conf
> >
> >
> > [filter:authtoken]
> > auth_host = 127.0.0.1
> > auth_port = 35357
> > auth_protocol = http
> > admin_tenant_name = %SERVICE_TENANT_NAME%
> > admin_user = %SERVICE_USER%
> > admin_password = %SERVICE_PASSWORD%
> >
> >
> > and something similar inside glance-api-paste.ini
> >
> >
> > So if you have these lines with %SERVICE_USER%, %SERVICE_PASSWORD%, %
> > SERVICE_TENANT_NAME%, you need to replace them all with real user
> > credentials that have been configured in Keystone.
> >
> >
> > Here you can see sample config files with the sections configured:
> >
> http://docs.openstack.org/trunk/openstack-compute/install/content/glance-api-paste-file.html
> >
> http://docs.openstack.org/trunk/openstack-compute/install/content/glance-api-conf-file.html
> >
> > On Thu, Oct 4, 2012 at 4:36 PM, Daniel Oliveira <dvalbrand@xxxxxxxxx>
> > wrote:
> >         Hello Janis,
> >
> >
> >         I'm not sure if I understood what I should replace. Do you
> >         mean replacing, for example:
> >
> >
> >         the line
> >         admin_user = glance
> >         in the [filter:authtoken] section
> >
> >
> >         for the line
> >         admin_user = %glance?
> >
> >
> >         and so on for the other credentials?
> >
> >         2012/10/4 J?nis ?e??eris <janis.gengeris@xxxxxxxxx>
> >                 Hi Daniel,
> >
> >
> >                 Do you have set up [filter:authtoken] section in
> >                 glance-api-paste.ini? You need to replace the strings
> >                 with percent signs with correct auth credentials.
> >
> >
> >                 To get more precise output use, 'glance -d index',
> >                 that will show additional debug information.
> >
> >                 On Thu, Oct 4, 2012 at 4:07 PM, Daniel Oliveira
> >                 <dvalbrand@xxxxxxxxx> wrote:
> >
> >                         Hello,
> >
> >
> >                         I've been trying to install OpenStack on a
> >                         server by following the manual installation
> >                         tutorial on openstack.org for Ubuntu Server
> >                         12.04 (and that's the OS I'm using,
> >                         obviously). But when it comes to test whether
> >                         Glance was installed successfully
> >                         (
> http://docs.openstack.org/essex/openstack-compute/install/apt/content/images-verifying-install.html),
> I get the following error message:
> >
> >
> >                         Failed to show index. Got error:
> >                         Unexpected responde: 500
> >
> >
> >                         The same happens when I try to do glance
> >                         index, which I guess should produce no output
> >                         instead. I really need some help on this,
> >                         since I'm not that experient with linux. Sorry
> >                         for any grammar errors, english is not my
> >                         native language ^_^. Thanks in advance,
> >
> >
> >                         --
> >                         My best regards,
> >
> >
> >                         Daniel Oliveira.
> >
> >
> >
> >
> >                         _______________________________________________
> >                         Mailing list: https://launchpad.net/~openstack
> >                         Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> >                         Unsubscribe : https://launchpad.net/~openstack
> >                         More help   :
> >                         https://help.launchpad.net/ListHelp
> >
> >
> >
> >
> >
> >                 --
> >                 --janis
> >
> >
> >
> >
> >         --
> >         My best regards,
> >
> >
> >         Daniel Oliveira.
> >
> >
> >
> >
> >
> >
> > --
> > --janis
> > _______________________________________________
> > Mailing list: https://launchpad.net/~openstack
> > Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~openstack
> > More help   : https://help.launchpad.net/ListHelp
>
>
>


-- 
My best regards,

Daniel Oliveira.