← Back to team overview

openstack team mailing list archive

Re: Just a newbie getting some error messages

 

That was it, the 500 error is gone (I can't believe I didn't notice the
typo, ffs...). Now I'm getting a 503 Error though. Gonna try to figure
something out.

2012/10/5 Asher Newcomer <ashernew@xxxxxxxxx>

> It looks like you have an error in an endpoint internalURL. Do a 'keystone
> endpoint-list' and make sure that the url stings look good. It appears
> you've made a typo tenand_id -> tenant_id.
>
> On Fri, Oct 5, 2012 at 9:36 AM, Daniel Oliveira <dvalbrand@xxxxxxxxx>wrote:
>
>> When I try to glance index, I get the following entry in my
>> /var/log/keystone/keystone.log:
>>
>> (root): 2012-10-05 10:21:24, 300 ERRPR u'tenand_id'
>> Traceback (most recent call last):
>>   File "/usr/lib/python2.7/dist-packages/keystone/common/wsgi.py", line
>> 184, in __call__
>>     result = method(context, **params)
>>   File "/usr/lib/python2.7/dist-packages/keystone/service.py", line 301,
>> in authenticate
>>     metadata=metadata_ref)
>>   File "/usr/lib/python2.7/dist-packages/keystone/common/manager.py",
>> line 48, in _wrapper
>>     return f(*args, **kw)
>>   File
>> "/usr/lib/python2.7/dist-packages/keystone/catalog/backends/sql.py", line
>> 169, in get_catalog
>>     catalog[region][srv_type]['internalURL'] = internal_url % d
>> KeyError: u'tenand_id'
>>
>> Any idea on what might be causing this?
>>
>> 2012/10/5 Daniel Oliveira <dvalbrand@xxxxxxxxx>
>>
>>> My glance-api-paste.ini already had the credentials when I posted the
>>> problem. Also, my python-glance package is Essex, just like the other
>>> openstack packages. After giving *glance -d index* as input, I noticed
>>> something that's pretty much obvious: The error comes from the response to
>>> the attempt at authenticating the user. I'm gonna double-check the
>>> credentials in the config files, then gonna report here.
>>>
>>> 2012/10/4 Jon Thomas <jthomas@xxxxxxxxxx>
>>>
>>>> On Thu, 2012-10-04 at 11:41 -0500, Ahmed Al-Mehdi wrote:
>>>> > Hi Janis,
>>>> >
>>>> >
>>>> > Just fyi, in the Folsom release the lines with the "%…%" in
>>>> > glance-api.conf  and glance-api-paste.ini are not present.  Document
>>>> > instructs user to add the three relevant lines to [filter.authtoken]
>>>> > section.
>>>> >
>>>> It looked to me that there were some config file changes in folsom.
>>>>
>>>> glance index works fine for me and I have in glance-api-paste.ini
>>>>
>>>> [filter:authtoken]
>>>> paste.filter_factory = keystone.middleware.auth_token:filter_factory
>>>> delay_auth_decision = true
>>>> admin_tenant_name = service
>>>> admin_user = glance
>>>> admin_password = servicepass
>>>>
>>>> and in glance-api.conf there is no [filter:authtoken]. However there is
>>>> [keystone_authtoken], but it's unchanged
>>>>
>>>> [keystone_authtoken]
>>>> auth_host = 127.0.0.1
>>>> auth_port = 35357
>>>> auth_protocol = http
>>>> admin_tenant_name = %SERVICE_TENANT_NAME%
>>>> admin_user = %SERVICE_USER%
>>>> admin_password = %SERVICE_PASSWORD%
>>>>
>>>> Another possiblity for the 500 error might be that the
>>>> python-glanceclient package is essex, not folsom. I had a 500 error with
>>>> nova that was due to the python-novaclient package being essex, while
>>>> nova packages were folsom.
>>>>
>>>> >
>>>> > Regards,
>>>> > Ahmed.
>>>> >
>>>> >
>>>> >
>>>> > From: J?nis ?e??eris <janis.gengeris@xxxxxxxxx>
>>>> > Date: Thursday, October 4, 2012 7:24 AM
>>>> > To: Daniel Oliveira <dvalbrand@xxxxxxxxx>
>>>> > Cc: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>
>>>> > Subject: Re: [Openstack] Just a newbie getting some error messages
>>>> >
>>>> >
>>>> >
>>>> > When you have fresh install you will usually have something like this
>>>> > in glance-api.conf
>>>> >
>>>> >
>>>> > [filter:authtoken]
>>>> > auth_host = 127.0.0.1
>>>> > auth_port = 35357
>>>> > auth_protocol = http
>>>> > admin_tenant_name = %SERVICE_TENANT_NAME%
>>>> > admin_user = %SERVICE_USER%
>>>> > admin_password = %SERVICE_PASSWORD%
>>>> >
>>>> >
>>>> > and something similar inside glance-api-paste.ini
>>>> >
>>>> >
>>>> > So if you have these lines with %SERVICE_USER%, %SERVICE_PASSWORD%, %
>>>> > SERVICE_TENANT_NAME%, you need to replace them all with real user
>>>> > credentials that have been configured in Keystone.
>>>> >
>>>> >
>>>> > Here you can see sample config files with the sections configured:
>>>> >
>>>> http://docs.openstack.org/trunk/openstack-compute/install/content/glance-api-paste-file.html
>>>> >
>>>> http://docs.openstack.org/trunk/openstack-compute/install/content/glance-api-conf-file.html
>>>> >
>>>> > On Thu, Oct 4, 2012 at 4:36 PM, Daniel Oliveira <dvalbrand@xxxxxxxxx>
>>>> > wrote:
>>>> >         Hello Janis,
>>>> >
>>>> >
>>>> >         I'm not sure if I understood what I should replace. Do you
>>>> >         mean replacing, for example:
>>>> >
>>>> >
>>>> >         the line
>>>> >         admin_user = glance
>>>> >         in the [filter:authtoken] section
>>>> >
>>>> >
>>>> >         for the line
>>>> >         admin_user = %glance?
>>>> >
>>>> >
>>>> >         and so on for the other credentials?
>>>> >
>>>> >         2012/10/4 J?nis ?e??eris <janis.gengeris@xxxxxxxxx>
>>>> >                 Hi Daniel,
>>>> >
>>>> >
>>>> >                 Do you have set up [filter:authtoken] section in
>>>> >                 glance-api-paste.ini? You need to replace the strings
>>>> >                 with percent signs with correct auth credentials.
>>>> >
>>>> >
>>>> >                 To get more precise output use, 'glance -d index',
>>>> >                 that will show additional debug information.
>>>> >
>>>> >                 On Thu, Oct 4, 2012 at 4:07 PM, Daniel Oliveira
>>>> >                 <dvalbrand@xxxxxxxxx> wrote:
>>>> >
>>>> >                         Hello,
>>>> >
>>>> >
>>>> >                         I've been trying to install OpenStack on a
>>>> >                         server by following the manual installation
>>>> >                         tutorial on openstack.org for Ubuntu Server
>>>> >                         12.04 (and that's the OS I'm using,
>>>> >                         obviously). But when it comes to test whether
>>>> >                         Glance was installed successfully
>>>> >                         (
>>>> http://docs.openstack.org/essex/openstack-compute/install/apt/content/images-verifying-install.html),
>>>> I get the following error message:
>>>> >
>>>> >
>>>> >                         Failed to show index. Got error:
>>>> >                         Unexpected responde: 500
>>>> >
>>>> >
>>>> >                         The same happens when I try to do glance
>>>> >                         index, which I guess should produce no output
>>>> >                         instead. I really need some help on this,
>>>> >                         since I'm not that experient with linux. Sorry
>>>> >                         for any grammar errors, english is not my
>>>> >                         native language ^_^. Thanks in advance,
>>>> >
>>>> >
>>>> >                         --
>>>> >                         My best regards,
>>>> >
>>>> >
>>>> >                         Daniel Oliveira.
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> _______________________________________________
>>>> >                         Mailing list:
>>>> https://launchpad.net/~openstack
>>>> >                         Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>>>> >                         Unsubscribe :
>>>> https://launchpad.net/~openstack
>>>> >                         More help   :
>>>> >                         https://help.launchpad.net/ListHelp
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >                 --
>>>> >                 --janis
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >         --
>>>> >         My best regards,
>>>> >
>>>> >
>>>> >         Daniel Oliveira.
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > --janis
>>>> > _______________________________________________
>>>> > Mailing list: https://launchpad.net/~openstack
>>>> > Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>>>> > Unsubscribe : https://launchpad.net/~openstack
>>>> > More help   : https://help.launchpad.net/ListHelp
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> My best regards,
>>>
>>> Daniel Oliveira.
>>>
>>>
>>
>>
>> --
>> My best regards,
>>
>> Daniel Oliveira.
>>
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~openstack
>> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~openstack
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>


-- 
My best regards,

Daniel Oliveira.

Follow ups

References