openstack team mailing list archive
-
openstack team
-
Mailing list archive
-
Message #18076
Re: Verification of Keystone Installation fails
I think I figured out the issue (as far as what env. variables I should have defined), and this is my fault for …mixing steps stated in Section 5 of "Openstack Install for Ubuntu" and Appendix B in the same doc. It seems defining the env. variable SERVICE_ENDPOINT causes the failure (not sure if this a bug or user misunderstanding/error).
root@bodega:~# env | egrep "OS_|SERVICE_"
OS_PASSWORD=admin
OS_AUTH_URL=http://10.176.20.158:5000/v2.0/
OS_USERNAME=admin
OS_TENANT_NAME=openstackDemo
SERVICE_ENDPOINT=http://10.176.20.158:35357/v2.0/
root@bodega:~#
root@bodega:~# keystone user-list
Expecting a token provided via either --token or env[SERVICE_TOKEN]
root@bodega:~#
However,
root@bodega:~# env | egrep "OS_|SERVICE_"
OS_PASSWORD=admin
OS_AUTH_URL=http://10.176.20.158:5000/v2.0/
OS_USERNAME=admin
OS_TENANT_NAME=openstackDemo
root@bodega:~#
root@bodega:~# keystone user-list
+----------------------------------+--------+---------+-------+
| id | name | enabled | email |
+----------------------------------+--------+---------+-------+
| 32cc7b40147c46539212870b371c43f0 | swift | True | |
| 4eb5d55edb4141aa9950fc25196bd669 | nova | True | |
| 6744c4637ea64a1e9ce53ea8e945fc0d | ec2 | True | |
| aa5449939470460bb21d391c89327b67 | glance | True | |
| ce016bb05df949ebbafcc7c165359d7c | admin | True | |
+----------------------------------+--------+---------+-------+
root@bodega:~#
I apologize for wasting people's time. For now, I will move onto next step.
Regards,
Ahmed.
From: Joshua Harlow <harlowja@xxxxxxxxxxxxx<mailto:harlowja@xxxxxxxxxxxxx>>
Date: Wednesday, October 31, 2012 1:32 PM
To: Ahmed Al-Mehdi <ahmed@xxxxxxxxxx<mailto:ahmed@xxxxxxxxxx>>, Dolph Mathews <dolph.mathews@xxxxxxxxx<mailto:dolph.mathews@xxxxxxxxx>>
Cc: Joseph Heck <Joe.Heck@xxxxxxxxxx<mailto:Joe.Heck@xxxxxxxxxx>>, "openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>" <openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>>
Subject: Re: [Openstack] Verification of Keystone Installation fails
I think the overall issue is connected to https://bugs.launchpad.net/keystone/+bug/962600
Right? Seems like that is still happening :-(
From: Ahmed Al-Mehdi <ahmed@xxxxxxxxxx<mailto:ahmed@xxxxxxxxxx>>
Date: Wednesday, October 31, 2012 1:15 PM
To: Dolph Mathews <dolph.mathews@xxxxxxxxx<mailto:dolph.mathews@xxxxxxxxx>>
Cc: Joseph Heck <Joe.Heck@xxxxxxxxxx<mailto:Joe.Heck@xxxxxxxxxx>>, "openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>" <openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>>
Subject: Re: [Openstack] Verification of Keystone Installation fails
Hi Dolph,
Awesome, that worked. Thank you very much. Just out of curiosity, what was the exact conflict? Between which environment variable and option passed to the CLI?
Regards,
Ahmed.
From: Dolph Mathews <dolph.mathews@xxxxxxxxx<mailto:dolph.mathews@xxxxxxxxx>>
Date: Wednesday, October 31, 2012 10:46 AM
To: Ahmed Al-Mehdi <ahmed@xxxxxxxxxx<mailto:ahmed@xxxxxxxxxx>>
Cc: "openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>" <openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>>, Joseph Heck <Joe.Heck@xxxxxxxxxx<mailto:Joe.Heck@xxxxxxxxxx>>
Subject: Re: [Openstack] Verification of Keystone Installation fails
I was able to reproduce by defining SERVICE_ENDPOINT and SERVICE_TOKEN in my own environment, which appear to be overriding the credentials provided on the CLI -- I don't think that's the intended behavior.
If you unset them, you should be able to verify the install.
If you skip verifying keystone and something is wrong with it, you'll likely find out pretty quick when another service calls keystone for the first time :)
-Dolph
On Wed, Oct 31, 2012 at 12:22 PM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx<mailto:ahmed@xxxxxxxxxx>> wrote:
Hi Dolph,
Thank you very much for helping me on this issue. Following is the environment variables related to openstack:
root@bodega:~# env | egrep "OS_|SERVICE_"
SERVICE_ENDPOINT=http://10.176.20.158:35357/v2.0/
SERVICE_TOKEN=012345SECRET99TOKEN012345
root@bodega:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:1e:67:06:1b:67
inet addr:10.176.20.158 Bcast:10.176.255.255 Mask:255.255.0.0
inet6 addr: fe80::21e:67ff:fe06:1b67/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12760203 errors:0 dropped:0 overruns:0 frame:0
TX packets:203944 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1044985224 (1.0 GB) TX bytes:22642912 (22.6 MB)
Interrupt:16 Memory:b2000000-b2020000
root@bodega:~#
I am attaching keystone.conf file.
Would you happen to know if there is a high level document document on keystone (more than just a user guide, but a architectural/functional doc, but not a API doc). Something similar to http://docs.openstack.org/trunk/openstack-identity/admin/os-identity-starter-guide-trunk.pdf but updated.
Does my current issue prohibit me from progressing forward with the next steps in the install document, setting up glance, nova, etc.?
Regards,
Ahmed.
From: Dolph Mathews <dolph.mathews@xxxxxxxxx<mailto:dolph.mathews@xxxxxxxxx>>
Date: Wednesday, October 31, 2012 9:44 AM
To: Ahmed Al-Mehdi <ahmed@xxxxxxxxxx<mailto:ahmed@xxxxxxxxxx>>
Cc: "openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>" <openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>>
Subject: Re: [Openstack] Verification of Keystone Installation fails
The error you're seeing is actually client-side, so there won't be anything in keystone's logs. It indicates that you're not actually authenticating with keystone (and instead bypassing authentication using --token and --endpoint, for example) ... however, that's obviously not the case, as you're explicitly providing --os-username, etc.
Unfortunately, I'm not able to reproduce this issue. Can you share your OS_* environment variables? I suspect something there is unexpectedly overriding what you're providing on the CLI... which would be a legitimate bug.
Thanks,
-Dolph
On Wed, Oct 31, 2012 at 2:08 AM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx<mailto:ahmed@xxxxxxxxxx>> wrote:
Hello,
I followed the steps in the "OpenStack Install Deploy for Ubuntu" manual to install Keystone. However, when I issue the commands in section "Verifying the Identity Service Installation" ( http://docs.openstack.org/trunk/openstack-compute/install/apt/content/verifying-identity-install.html ), I am getting the following error:
# keystone --os-username=admin --os-password=admin --os-auth-url=http://10.176.20.158:35357/v2.0 token-get
'Client' object has no attribute 'service_catalog'
I don't see any additional info in keystone.log. Can someone please help me.
Thank you,
Ahmed.
_______________________________________________
Mailing list: https://launchpad.net/~openstack
Post to : openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
Follow ups
References