openstack team mailing list archive

[Skible OpenStack <skible.openstack@xxxxxxxxx>]

Hi Yi Sun,

We are facing the same problem. I guess my networking architecture was 
not as correct as i thought.
Although, i have just received a contribution from a friend that filled 
up the missing pieces and got it to work properly ! If you can bare with 
me, i will test it out tomorrow and publish it on the guide.

Best regards.
Le 06/11/2012 04:55, Yi Sun a écrit :
> Skible,
> Followed your guide, everything went through fine until I started my
> VM. The VM image I used is a ubuntu cloud image
> (http://cloud-images.ubuntu.com/precise/current/precise-server-cloudimg-amd64-disk1.img).
> After boot up, the VM can not access meta server. It complains about
> "not route found".
> I run a tcpdump on the VM tap interface, I'm seeing ARP requests to
> the router for the VM network (10.5.5.1) from the VM but no arp reply.
> quantum router-list and port-list give something below:
> root@controller/# quantum router-list
>
> | cc5e1de4-e59e-441d-92ea-da2f803f2903 | demo_net_router | null
>            |
>
> root@controller/# quantum port-list
> | 1af24487-4a48-45a7-939f-486e5d7996b3 |      | fa:16:3e:fd:da:ab |
> {"subnet_id": "cf894ab0-32e7-44e1-9467-cdeeb01597f9", "ip_address":
> "10.5.5.2"}  |
> | 61c2bef9-1bd9-4c2d-ad73-28740b4d0759 |      | fa:16:3e:cf:f4:09 |
> {"subnet_id": "cf894ab0-32e7-44e1-9467-cdeeb01597f9", "ip_address":
> "10.5.5.3"}  |
> | 63bea17f-af30-4d75-9aa5-052a426768d6 |      | fa:16:3e:f0:7a:16 |
> {"subnet_id": "cf894ab0-32e7-44e1-9467-cdeeb01597f9", "ip_address":
> "10.5.5.1"}  |
>
> But ifconfig on controller does not show interface for router at all
>
> Have you seen the same issue before?
> Thanks
> Yi
>
> On Fri, Nov 2, 2012 at 2:36 AM, Skible OpenStack
> <skible.openstack@xxxxxxxxx> wrote:
> > Hi Ian,
> >
> > Many thanks for the remark. i fixed it :)
> >
> > Le 02/11/2012 10:22, DarkSinclair a écrit :
> >
> > > Greetings Skible.
> > >
> > > Great work to you and the rest on the guide.  A minor change is required
> > > in nova.conf configuration for file VNC.  The parameter for
> > > vncserver_proxyclient_address must be eth0's IP address, otherwise the
> > > console reports 'failed to connect to server'.
> > >
> > > vncserver_proxyclient_address=172.16.2.250
> > > #vncserver_proxyclient_address=127.0.0.1
> > >
> > > Regards,
> > >
> > > Ian Sinclair
> > >
> > > On 2012-11-01, at 7:18 AM, Skible OpenStack <skible.openstack@xxxxxxxxx>
> > > wrote:
> > >
> > > hi Tomokazu,
> > >
> > > oups ! i forget to add that in the guide ! thanks ! i will fix it right
> > > away !
> > >
> > > As for the noVNC problem ! i think because you haven't installed noVNC on
> > > the compute node !
> > >
> > >
> > > Le 01/11/2012 11:31, Tomokazu Hirai a écrit :
> > > > Hi Skible,
> > > >
> > > > I installed openstack folsom with your guide and I noticed that
> > > > compute node's quantum can not access to controller node's
> > > > rabbitmq-server.
> > > >
> > > > so I added computeNode:/etc/quantum/quantum.conf with :
> > > >
> > > >       rabbit_host = <compute node's IP addr>
> > > >
> > > > now I can access to both node's VMs and VM can access to the
> > > > Internet. :D
> > > >
> > > > But I still have a problem.
> > > >
> > > > I can not access to VM's noVNC on compute node. I can
> > > > access to the VM's noVNC on controller node.
> > > >
> > > > Best regards,
> > > >
> > > > -- Tomokazu Hirai @jedipunkz
> > > >
> > > > From: Skible OpenStack <skible.openstack@xxxxxxxxx>
> > > > Subject: [Openstack] OpenStack Folsom Install Guide
> > > > Date: Wed, 31 Oct 2012 13:46:31 +0100
> > > >
> > > > > Hi Stackers,
> > > > >
> > > > > i am currently seeing a lot of people having trouble deploying
> > > > > OpenStack Folsom si i humbly present this guide for those who are
> > > > > experimented and even those who are still taking their first steps
> > > > > into the cloud world.
> > > > >
> > > > > The guide has been updated from the last version to support:
> > > > >
> > > > > * Multi Node install
> > > > > * ubuntu server 12.10
> > > > > * Quatum Configuration
> > > > > * No Quantum is you are not interrested
> > > > >
> > > > > Test it to see for yourself how simple and fun has OpenStack
> > > > > deployment has became !
> > > > >
> > > > > OpenStack Folsom Install Guide
> > > > >
> > > > > <https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/master/OpenStack_Folsom_Install_Guide_WebVersion.rst>
> > > > >
> > > > > Cheers
> > > > _______________________________________________
> > > > Mailing list: https://launchpad.net/~openstack
> > > > Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> > > > Unsubscribe : https://launchpad.net/~openstack
> > > > More help   : https://help.launchpad.net/ListHelp
> > >
> > > _______________________________________________
> > > Mailing list: https://launchpad.net/~openstack
> > > Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> > > Unsubscribe : https://launchpad.net/~openstack
> > > More help   : https://help.launchpad.net/ListHelp
> >
> > _______________________________________________
> > Mailing list: https://launchpad.net/~openstack
> > Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~openstack
> > More help   : https://help.launchpad.net/ListHelp