openstack team mailing list archive

[Sudhakar Gariganti <sudhakar.gariganti@xxxxxxxxx>]

Hi Razique,

Pasting here the config:
=======================================================
root@sdn-sudhakar:/home/sudhakar# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).


#Management Network
auto eth0
    iface eth0 inet static
    address 192.168.0.1
    netmask 255.255.255.0
    gateway 192.168.0.254
    dns-nameservers 8.8.8.8

# VMs Networks with OVS in tunnel mode
auto eth1
iface eth1 inet static
address 10.0.0.3
netmask 255.255.255.0

#Public Bridge
auto eth2
iface eth2 inet dhcp
#address 15.146.194.210
#netmask 255.255.255.0
#gateway 15.146.194.1
============================================================

Keystone config
[image: Inline image 3]



Let me know if you need any specific configuration...

Thanks,
Sudhakar.



On Tue, Nov 27, 2012 at 4:31 PM, Razique Mahroua
<razique.mahroua@xxxxxxxxx>wrote:

> Hi Sudhakar,
> can you show us the several configuration files of the nodes ?
> thanks
>
> *Razique Mahroua** - **Nuage & Co*
> razique.mahroua@xxxxxxxxx
>
>
> Le 27 nov. 2012 à 11:07, Sudhakar Gariganti <sudhakar.gariganti@xxxxxxxxx>
> a écrit :
>
> Hi ,
>
> I am trying to get the basic 2 node openstack environment. I have two
> physical workstations.
> Initially, I have tried Devstack guide to setup an all in one node, it
> worked fine.
> Then I wanted to get this 2 node setup. Tried to follow the Multinode
> guide available there on Devstack. But ran into issues.
>
> So I started clean again,and trying the guide present here :
>
> http://docs.openstack.org/folsom/basic-install/content/basic-install_controller.html
>
> I am following the exact configurations specified there, but I am stuck at
> the KeyStone step.
> For any keystone command I try to execute, I am getting the following
> error:
> *"No handlers could be found for logger "keystoneclient.client"
> Unable to communicate with identity service: [Errno 111] Connection
> refused. (HTTP 400)"
> *
> I have tried restarting my keystone service , did a keystone-manage
> db_sync and then restarted keystone, but i get the same error. Seems like
> the mysql tables are not populated correctly.
>
> Few of my config details:
> OS: Ubuntu 12.04 Server
> 3 NICs...
> eth0 - configured for management network (as directed in the guide)
> eth1 - configured for VM network (as directed in the guide)
> eth2 - connected to my office DHCP network which serves as the link to
> internet.
>
> I am executing the guide as root. Here is a screenshot of my network
> configuration<IP_Config.png>
>
>
> Excuse me for the long mail,but any pointers to how I can get this
> resolved??
>
>
>
> Thanks,
> G.Sudhakar Babu
>
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~openstack
> More help   : https://help.launchpad.net/ListHelp
>
>
>