openstack team mailing list archive
-
openstack team
-
Mailing list archive
-
Message #20996
Re: Cant ping private or floating IP
Hello,
I have qemu-kvm package installed.
I have tried libvirt_cpu_mode = host-model on /etc/nova.conf but did not
work.
Thanks.
On 18 February 2013 19:21, JuanFra Rodriguez Cardoso <
juanfra.rodriguez.cardoso@xxxxxxxxx> wrote:
> Hi Chathura:
>
> Try libvirt_cpu_mode = host-model on /etc/nova.conf
>
> Reference: https://wiki.openstack.org/wiki/LibvirtXMLCPUModel
>
> Regards,
> JuanFra
>
>
> 2013/2/18 Richard Whitney <rw@xxxxxxxxxxxxxxxxxx>
> >
> > Try QEMU instead.
> >
> > Cheers,
> >
> > __________________________________
> > Richard Whitney
> > Federal SE Team Lead
> > JNCIE-SP, BCNE, BCFP
> > Arista Networks, Inc.
> > Mobile: 703-627-6092
> > Support: : 866-476-0000
> >
> > On Feb 18, 2013 1:04 PM, "Chathura M. Sarathchandra Magurawalage" <
> 77.chathura@xxxxxxxxx> wrote:
> >>
> >> Hello guys,
> >>
> >> I think I have found something which could be the potential cause of
> this problem. I checked my /var/log/libvirt/libvirtd.log and found this.
> These errors occur when I spawn a VM or on reboot.
> >>
> >> 2013-02-18 14:38:04.654+0000: 22383: info : libvirt version: 0.9.13
> >> 2013-02-18 14:38:04.654+0000: 22383: error :
> virNWFilterSnoopLeaseFileRefresh:1882 :
> open("/var/run/libvirt/network/nwfilter.ltmp"): No such file or directory
> >> 2013-02-18 17:53:53.793+0000: 22372: error :
> virNWFilterDHCPSnoopEnd:2113 : internal error ifname "vnet0" not in key map
> >> 2013-02-18 17:53:53.795+0000: 22372: error : virNetDevGetIndex:657 :
> Unable to get index for interface vnet0: No such device
> >> 2013-02-18 17:53:58.311+0000: 22370: warning : x86Decode:1346 :
> Preferred CPU model SandyBridge not allowed by hypervisor; closest
> supported model will be used
> >> (END)
> >>
> >>
> >> Could this be the problem?
> >>
> >> Thanks
> >>
> >>
> -----------------------------------------------------------------------------------------------------------------------------
> >> Chathura Madhusanka Sarathchandra Magurawalage.
> >> 1NW.2.1, Desk 2
> >> School of Computer Science and Electronic Engineering
> >> University Of Essex
> >> United Kingdom.
> >>
> >> Email: csarata@xxxxxxxxxxx
> >> chathura.sarathchandra@xxxxxxxxx
> >> 77.chathura@xxxxxxxxx
> >>
> >>
> >> On 18 February 2013 14:37, Chathura M. Sarathchandra Magurawalage <
> 77.chathura@xxxxxxxxx> wrote:
> >>>
> >>> I have spawned a VM using cirros-0.3.0-x86_64 image, but it hangs on
> the bootup. The log is as follows.
> >>>
> >>> [ 0.000000] Initializing cgroup subsys cpuset
> >>> [ 0.000000] Initializing cgroup subsys cpu
> >>> [ 0.000000] Linux version 3.0.0-12-virtual (buildd@crested) (gcc
> version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7
> 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
> >>> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
> console=ttyS0 console=hvc0
> >>> [ 0.000000] KERNEL supported cpus:
> >>> [ 0.000000] Intel GenuineIntel
> >>> [ 0.000000] AMD AuthenticAMD
> >>> [ 0.000000] Centaur CentaurHauls
> >>> [ 0.000000] BIOS-provided physical RAM map:
> >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> >>> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> >>> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
> (reserved)
> >>> [ 0.000000] NX (Execute Disable) protection: active
> >>> [ 0.000000] DMI 2.4 present.
> >>> [ 0.000000] No AGP bridge found
> >>> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
> >>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> >>> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
> >>> [ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
> >>> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
> >>> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
> >>> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT
> 00000001 INTL 20100528)
> >>> [ 0.000000] ACPI: FACS 000000001fffff40 00040
> >>> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET
> 00000001 BXPC 00000001)
> >>> [ 0.000000] No NUMA configuration found
> >>> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
> >>> [ 0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
> >>> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
> >>> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
> >>> [ 0.000000] Zone PFN ranges:
> >>> [ 0.000000] DMA 0x00000010 -> 0x00001000
> >>> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> >>> [ 0.000000] Normal empty
> >>> [ 0.000000] Movable zone start PFN for each node
> >>> [ 0.000000] early_node_map[2] active PFN ranges
> >>> [ 0.000000] 0: 0x00000010 -> 0x0000009d
> >>> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
> >>> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
> >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> >>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> >>> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000,
> GSI 0-23
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high
> level)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high
> level)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high
> level)
> >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> >>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> >>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> >>> [ 0.000000] PM: Registered nosave memory: 000000000009d000 -
> 000000000009e000
> >>> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
> 00000000000a0000
> >>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> >>> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> >>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
> 20000000:deffc000)
> >>> [ 0.000000] Booting paravirtualized kernel on KVM
> >>> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
> nr_cpu_ids:1 nr_node_ids:1
> >>> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296
> r8192 d23104 u2097152
> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
> >>> [ 0.000000] KVM setup async PF for cpu 0
> >>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 129157
> >>> [ 0.000000] Policy zone: DMA32
> >>> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro
> console=tty0 console=ttyS0 console=hvc0
> >>> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
> >>> [ 0.000000] Checking aperture...
> >>> [ 0.000000] No AGP bridge found
> >>> [ 0.000000] Memory: 497852k/524276k available (6206k kernel code,
> 460k absent, 25964k reserved, 6907k data, 900k init)
> >>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=1, Nodes=1
> >>> [ 0.000000] Hierarchical RCU implementation.
> >>> [ 0.000000] RCU dyntick-idle grace-period acceleration is
> enabled.
> >>> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
> >>> [ 0.000000] Console: colour VGA+ 80x25
> >>> [ 0.000000] console [tty0] enabled
> >>> [ 0.000000] console [ttyS0] enabled
> >>> [ 0.000000] allocated 4194304 bytes of page_cgroup
> >>> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> >>> [ 0.000000] Detected 3392.282 MHz processor.
> >>> [ 0.008000] Calibrating delay loop (skipped) preset value.. 6784.56
> BogoMIPS (lpj=13569128)
> >>> [ 0.008000] pid_max: default: 32768 minimum: 301
> >>> [ 0.008000] Security Framework initialized
> >>> [ 0.008000] AppArmor: AppArmor initialized
> >>> [ 0.008000] Yama: becoming mindful.
> >>> [ 0.008000] Dentry cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> >>> [ 0.008311] Inode-cache hash table entries: 32768 (order: 6, 262144
> bytes)
> >>> [ 0.009201] Mount-cache hash table entries: 256
> >>> [ 0.009886] Initializing cgroup subsys cpuacct
> >>> [ 0.010420] Initializing cgroup subsys memory
> >>> [ 0.010935] Initializing cgroup subsys devices
> >>> [ 0.011450] Initializing cgroup subsys freezer
> >>> [ 0.012006] Initializing cgroup subsys net_cls
> >>> [ 0.012517] Initializing cgroup subsys blkio
> >>> [ 0.013021] Initializing cgroup subsys perf_event
> >>> [ 0.013606] CPU: CPU feature xsave disabled, no CPUID level 0xd
> >>> [ 0.014314] mce: CPU supports 10 MCE banks
> >>> [ 0.015067] SMP alternatives: switching to UP code
> >>> [ 0.031928] Freeing SMP alternatives: 24k freed
> >>> [ 0.032017] ACPI: Core revision 20110413
> >>> [ 0.033120] ftrace: allocating 26075 entries in 103 pages
> >>> [ 0.040157] Enabling x2apic
> >>> [ 0.040543] Enabled x2apic
> >>> [ 0.041005] Switched APIC routing to physical x2apic.
> >>> [ 0.042112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> >>> [ 0.042735] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz
> stepping 0b
> >>> [ 0.044002] Performance Events: unsupported p6 CPU model 15 no PMU
> driver, software events only.
> >>> [ 0.044002] Brought up 1 CPUs
> >>> [ 0.044002] Total of 1 processors activated (6784.56 BogoMIPS).
> >>> [ 0.044002] devtmpfs: initialized
> >>> [ 0.044758] print_constraints: dummy:
> >>> [ 0.045261] Time: 13:23:57 Date: 02/18/13
> >>> [ 0.045781] NET: Registered protocol family 16
> >>> [ 0.046397] ACPI: bus type pci registered
> >>> [ 0.046931] PCI: Using configuration type 1 for base access
> >>> [ 0.047944] bio: create slab <bio-0> at 0
> >>> [ 0.049221] ACPI: Interpreter enabled
> >>> [ 0.049724] ACPI: (supports S0 S3 S4 S5)
> >>> [ 0.050400] ACPI: Using IOAPIC for interrupt routing
> >>> [ 0.053342] ACPI: No dock devices found.
> >>> [ 0.053823] HEST: Table not found.
> >>> [ 0.054309] PCI: Ignoring host bridge windows from ACPI; if
> necessary, use "pci=use_crs" and report a bug
> >>> [ 0.055363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> >>> [ 0.057394] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by
> PIIX4 ACPI
> >>> [ 0.058290] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by
> PIIX4 SMB
> >>> [ 0.070449] pci0000:00: Unable to request _OSC control (_OSC
> support mask: 0x1e)
> >>> [ 0.077527] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> >>> [ 0.079626] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> >>> [ 0.081053] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> >>> [ 0.083131] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> >>> [ 0.085052] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
> >>> [ 0.086160] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> >>> [ 0.087084] vgaarb: loaded
> >>> [ 0.088006] vgaarb: bridge control possible 0000:00:02.0
> >>> [ 0.088772] SCSI subsystem initialized
> >>> [ 0.089402] usbcore: registered new interface driver usbfs
> >>> [ 0.090049] usbcore: registered new interface driver hub
> >>> [ 0.090671] usbcore: registered new device driver usb
> >>> [ 0.091366] PCI: Using ACPI for IRQ routing
> >>> [ 0.092226] NetLabel: Initializing
> >>> [ 0.092659] NetLabel: domain hash size = 128
> >>> [ 0.093166] NetLabel: protocols = UNLABELED CIPSOv4
> >>> [ 0.093735] NetLabel: unlabeled traffic allowed by default
> >>> [ 0.094424] HPET: 3 timers in total, 0 timers will be used for
> per-cpu timer
> >>> [ 0.095239] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> >>> [ 0.096008] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
> >>> [ 0.100104] Switching to clocksource kvm-clock
> >>> [ 0.103381] Switched to NOHz mode on CPU #0
> >>> [ 0.105479] AppArmor: AppArmor Filesystem Enabled
> >>> [ 0.106028] pnp: PnP ACPI init
> >>> [ 0.106426] ACPI: bus type pnp registered
> >>> [ 0.107361] pnp: PnP ACPI: found 8 devices
> >>> [ 0.107834] ACPI: ACPI bus type pnp unregistered
> >>> [ 0.113757] NET: Registered protocol family 2
> >>> [ 0.114308] IP route cache hash table entries: 4096 (order: 3,
> 32768 bytes)
> >>> [ 0.115168] TCP established hash table entries: 16384 (order: 6,
> 262144 bytes)
> >>> [ 0.116126] TCP bind hash table entries: 16384 (order: 6, 262144
> bytes)
> >>> [ 0.116924] TCP: Hash tables configured (established 16384 bind
> 16384)
> >>> [ 0.117635] TCP reno registered
> >>> [ 0.118036] UDP hash table entries: 256 (order: 1, 8192 bytes)
> >>> [ 0.118658] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> >>> [ 0.119360] NET: Registered protocol family 1
> >>> [ 0.119870] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> >>> [ 0.120514] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> >>> [ 0.121133] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> >>> [ 0.122087] Trying to unpack rootfs image as initramfs...
> >>> [ 0.128136] audit: initializing netlink socket (disabled)
> >>> [ 0.128732] type=2000 audit(1361193838.124:1): initialized
> >>> [ 0.156191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> >>> [ 0.160939] VFS: Disk quotas dquot_6.5.2
> >>> [ 0.161482] Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> >>> [ 0.167538] Freeing initrd memory: 2000k freed
> >>> [ 0.168234] fuse init (API version 7.16)
> >>> [ 0.168760] msgmni has been set to 976
> >>> [ 0.172508] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
> >>> [ 0.173426] io scheduler noop registered
> >>> [ 0.173901] io scheduler deadline registered (default)
> >>> [ 0.174499] io scheduler cfq registered
> >>> [ 0.175032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> >>> [ 0.175661] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> >>> [ 0.176455] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> >>> [ 0.177316] ACPI: Power Button [PWRF]
> >>> [ 0.178304] ERST: Table is not found!
> >>> [ 0.178861] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> >>> [ 0.179487] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
> 11 (level, high) -> IRQ 11
> >>> [ 0.180578] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> >>> [ 0.181201] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
> 10 (level, high) -> IRQ 10
> >>> [ 0.182651] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> >>> [ 0.184109] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
> 10 (level, high) -> IRQ 10
> >>> [ 0.186494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> >>> [ 0.209836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >>> [ 0.231178] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> >>> [ 0.252936] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >>> [ 0.276078] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> >>> [ 0.276821] Linux agpgart interface v0.103
> >>> [ 0.277915] brd: module loaded
> >>> [ 0.278589] loop: module loaded
> >>> [ 0.296757] vda: vda1
> >>> [ 0.298843] scsi0 : ata_piix
> >>> [ 0.299883] scsi1 : ata_piix
> >>> [ 0.300868] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0
> irq 14
> >>> [ 0.302557] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8
> irq 15
> >>> [ 0.304569] Fixed MDIO Bus: probed
> >>> [ 0.305629] PPP generic driver version 2.4.2
> >>> [ 0.306840] tun: Universal TUN/TAP device driver, 1.6
> >>> [ 0.308173] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> >>> [ 0.384685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> >>> [ 0.386400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> >>> [ 0.387933] uhci_hcd: USB Universal Host Controller Interface driver
> >>> [ 0.389589] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
> 10 (level, high) -> IRQ 10
> >>> [ 0.391806] uhci_hcd 0000:00:01.2: UHCI Host Controller
> >>> [ 0.393273] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
> bus number 1
> >>> [ 0.395388] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
> >>> [ 0.397118] hub 1-0:1.0: USB hub found
> >>> [ 0.397792] hub 1-0:1.0: 2 ports detected
> >>> [ 0.398326] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
> at 0x60,0x64 irq 1,12
> >>> [ 0.399659] serio: i8042 KBD port at 0x60,0x64 irq 1
> >>> [ 0.400272] serio: i8042 AUX port at 0x60,0x64 irq 12
> >>> [ 0.400857] mousedev: PS/2 mouse device common for all mice
> >>> [ 0.401539] rtc_cmos 00:01: RTC can wake from S4
> >>> [ 0.402183] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> >>> [ 0.402875] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
> >>> [ 0.403594] device-mapper: uevent: version 1.0.3
> >>> [ 0.404188] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
> initialised: dm-devel@xxxxxxxxxx
> >>> [ 0.405131] cpuidle: using governor ladder
> >>> [ 0.405608] cpuidle: using governor menu
> >>> [ 0.406083] EFI Variables Facility v0.08 2004-May-17
> >>> [ 0.406733] TCP cubic registered
> >>> [ 0.407238] NET: Registered protocol family 10
> >>> [ 0.408067] NET: Registered protocol family 17
> >>> [ 0.408585] Registering the dns_resolver key type
> >>> [ 0.409217] registered taskstats version 1
> >>> [ 0.409861] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input1
> >>> [ 0.413008] Magic number: 1:528:382
> >>> [ 0.413527] rtc_cmos 00:01: setting system clock to 2013-02-18
> 13:23:57 UTC (1361193837)
> >>> [ 0.414461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> >>> [ 0.415109] EDD information not available.
> >>> [ 0.564916] Freeing unused kernel memory: 900k freed
> >>> [ 0.566068] Write protecting the kernel read-only data: 12288k
> >>> [ 0.574550] Freeing unused kernel memory: 1968k freed
> >>> [ 0.579346] Freeing unused kernel memory: 1368k freed
> >>>
> >>> info: initramfs: up at 0.58
> >>> NOCHANGE: partition 1 is size 64260. it cannot be grown
> >>> info: initramfs loading root from /dev/vda1
> >>> info: /etc/init.d/rc.sysinit: up at 0.75
> >>> [ 0.754862] EXT3-fs (vda1): warning: checktime reached, running
> e2fsck is recommended
> >>> Starting logging: OK
> >>> Initializing random number generator... done.
> >>> Starting network...
> >>> udhcpc (v1.18.5) started
> >>> Sending discover...
> >>> Sending select for 10.5.5.5...
> >>> Lease of 10.5.5.5 obtained, lease time 120
> >>> deleting routers
> >>> route: SIOCDELRT: No such process
> >>> adding dns 8.8.8.8
> >>> cloud-setup: checking
> http://169.254.169.254/2009-04-04/meta-data/instance-id
> >>> wget: can't connect to remote host (169.254.169.254): Connection timed
> out
> >>> cloud-setup: failed 1/30: up 0.85. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Connection timed
> out
> >>> cloud-setup: failed 2/30: up 191.17. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Connection timed
> out
> >>> cloud-setup: failed 3/30: up 381.64. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Connection timed
> out
> >>> cloud-setup: failed 4/30: up 572.10. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Connection timed
> out
> >>> cloud-setup: failed 5/30: up 762.57. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Connection timed
> out
> >>> cloud-setup: failed 6/30: up 953.03. request failed
> >>>
> >>>
> >>>
> >>> Then again I created another compute node and spawned another VM on
> there and it wont hang and lets me log in. But does not get an ip. Its log
> is as follows.
> >>>
> >>>
> >>> [ 0.000000] Initializing cgroup subsys cpuset
> >>> [ 0.000000] Initializing cgroup subsys cpu
> >>> [ 0.000000] Linux version 3.0.0-12-virtual (buildd@crested) (gcc
> version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7
> 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
> >>> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
> console=ttyS0 console=hvc0
> >>> [ 0.000000] KERNEL supported cpus:
> >>> [ 0.000000] Intel GenuineIntel
> >>> [ 0.000000] AMD AuthenticAMD
> >>> [ 0.000000] Centaur CentaurHauls
> >>> [ 0.000000] BIOS-provided physical RAM map:
> >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> >>> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> >>> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000
> (reserved)
> >>> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
> (reserved)
> >>> [ 0.000000] NX (Execute Disable) protection: active
> >>> [ 0.000000] DMI 2.4 present.
> >>> [ 0.000000] No AGP bridge found
> >>> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
> >>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> >>> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
> >>> [ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
> >>> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
> >>> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
> >>> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT
> 00000001 INTL 20100528)
> >>> [ 0.000000] ACPI: FACS 000000001fffff40 00040
> >>> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC
> 00000001 BXPC 00000001)
> >>> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET
> 00000001 BXPC 00000001)
> >>> [ 0.000000] No NUMA configuration found
> >>> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
> >>> [ 0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
> >>> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
> >>> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
> >>> [ 0.000000] Zone PFN ranges:
> >>> [ 0.000000] DMA 0x00000010 -> 0x00001000
> >>> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> >>> [ 0.000000] Normal empty
> >>> [ 0.000000] Movable zone start PFN for each node
> >>> [ 0.000000] early_node_map[2] active PFN ranges
> >>> [ 0.000000] 0: 0x00000010 -> 0x0000009d
> >>> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
> >>> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
> >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> >>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> >>> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000,
> GSI 0-23
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high
> level)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high
> level)
> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high
> level)
> >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> >>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> >>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> >>> [ 0.000000] PM: Registered nosave memory: 000000000009d000 -
> 000000000009e000
> >>> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
> 00000000000a0000
> >>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> >>> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> >>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
> 20000000:deffc000)
> >>> [ 0.000000] Booting paravirtualized kernel on KVM
> >>> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
> nr_cpu_ids:1 nr_node_ids:1
> >>> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296
> r8192 d23104 u2097152
> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
> >>> [ 0.000000] KVM setup async PF for cpu 0
> >>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 129157
> >>> [ 0.000000] Policy zone: DMA32
> >>> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro
> console=tty0 console=ttyS0 console=hvc0
> >>> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
> >>> [ 0.000000] Checking aperture...
> >>> [ 0.000000] No AGP bridge found
> >>> [ 0.000000] Memory: 497852k/524276k available (6206k kernel code,
> 460k absent, 25964k reserved, 6907k data, 900k init)
> >>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=1, Nodes=1
> >>> [ 0.000000] Hierarchical RCU implementation.
> >>> [ 0.000000] RCU dyntick-idle grace-period acceleration is
> enabled.
> >>> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
> >>> [ 0.000000] Console: colour VGA+ 80x25
> >>> [ 0.000000] console [tty0] enabled
> >>> [ 0.000000] console [ttyS0] enabled
> >>> [ 0.000000] allocated 4194304 bytes of page_cgroup
> >>> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> >>> [ 0.000000] Detected 2388.000 MHz processor.
> >>> [ 0.008000] Calibrating delay loop (skipped) preset value.. 4776.00
> BogoMIPS (lpj=9552000)
> >>> [ 0.008000] pid_max: default: 32768 minimum: 301
> >>> [ 0.008060] Security Framework initialized
> >>> [ 0.009366] AppArmor: AppArmor initialized
> >>> [ 0.012006] Yama: becoming mindful.
> >>> [ 0.013281] Dentry cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> >>> [ 0.016066] Inode-cache hash table entries: 32768 (order: 6, 262144
> bytes)
> >>> [ 0.018349] Mount-cache hash table entries: 256
> >>> [ 0.020129] Initializing cgroup subsys cpuacct
> >>> [ 0.021491] Initializing cgroup subsys memory
> >>> [ 0.022851] Initializing cgroup subsys devices
> >>> [ 0.024016] Initializing cgroup subsys freezer
> >>> [ 0.025363] Initializing cgroup subsys net_cls
> >>> [ 0.026715] Initializing cgroup subsys blkio
> >>> [ 0.028030] Initializing cgroup subsys perf_event
> >>> [ 0.029573] mce: CPU supports 10 MCE banks
> >>> [ 0.031197] SMP alternatives: switching to UP code
> >>> [ 0.147933] Freeing SMP alternatives: 24k freed
> >>> [ 0.148079] ACPI: Core revision 20110413
> >>> [ 0.150559] ftrace: allocating 26075 entries in 103 pages
> >>> [ 0.157762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> >>> [ 0.159467] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz
> stepping 0b
> >>> [ 0.164009] Performance Events: unsupported p6 CPU model 15 no PMU
> driver, software events only.
> >>> [ 0.164009] Brought up 1 CPUs
> >>> [ 0.164014] Total of 1 processors activated (4776.00 BogoMIPS).
> >>> [ 0.166755] devtmpfs: initialized
> >>> [ 0.170360] print_constraints: dummy:
> >>> [ 0.172104] Time: 13:24:44 Date: 02/18/13
> >>> [ 0.173418] NET: Registered protocol family 16
> >>> [ 0.174937] ACPI: bus type pci registered
> >>> [ 0.176142] PCI: Using configuration type 1 for base access
> >>> [ 0.178569] bio: create slab <bio-0> at 0
> >>> [ 0.182563] ACPI: Interpreter enabled
> >>> [ 0.184015] ACPI: (supports S0 S3 S4 S5)
> >>> [ 0.185710] ACPI: Using IOAPIC for interrupt routing
> >>> [ 0.191250] ACPI: No dock devices found.
> >>> [ 0.192014] HEST: Table not found.
> >>> [ 0.193107] PCI: Ignoring host bridge windows from ACPI; if
> necessary, use "pci=use_crs" and report a bug
> >>> [ 0.196032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> >>> [ 0.201426] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by
> PIIX4 ACPI
> >>> [ 0.203612] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by
> PIIX4 SMB
> >>> [ 0.222828] pci0000:00: Unable to request _OSC control (_OSC
> support mask: 0x1e)
> >>> [ 0.230916] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> >>> [ 0.233519] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> >>> [ 0.236105] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> >>> [ 0.238340] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> >>> [ 0.240838] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
> >>> [ 0.243162] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> >>> [ 0.244018] vgaarb: loaded
> >>> [ 0.244970] vgaarb: bridge control possible 0000:00:02.0
> >>> [ 0.248376] SCSI subsystem initialized
> >>> [ 0.249892] usbcore: registered new interface driver usbfs
> >>> [ 0.251464] usbcore: registered new interface driver hub
> >>> [ 0.252071] usbcore: registered new device driver usb
> >>> [ 0.253742] PCI: Using ACPI for IRQ routing
> >>> [ 0.256479] NetLabel: Initializing
> >>> [ 0.257580] NetLabel: domain hash size = 128
> >>> [ 0.258875] NetLabel: protocols = UNLABELED CIPSOv4
> >>> [ 0.260035] NetLabel: unlabeled traffic allowed by default
> >>> [ 0.261665] HPET: 3 timers in total, 0 timers will be used for
> per-cpu timer
> >>> [ 0.264019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> >>> [ 0.265888] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
> >>> [ 0.272194] Switching to clocksource kvm-clock
> >>> [ 0.274531] Switched to NOHz mode on CPU #0
> >>> [ 0.285035] AppArmor: AppArmor Filesystem Enabled
> >>> [ 0.286499] pnp: PnP ACPI init
> >>> [ 0.287542] ACPI: bus type pnp registered
> >>> [ 0.289770] pnp: PnP ACPI: found 8 devices
> >>> [ 0.291018] ACPI: ACPI bus type pnp unregistered
> >>> [ 0.298943] NET: Registered protocol family 2
> >>> [ 0.300379] IP route cache hash table entries: 4096 (order: 3,
> 32768 bytes)
> >>> [ 0.302578] TCP established hash table entries: 16384 (order: 6,
> 262144 bytes)
> >>> [ 0.305173] TCP bind hash table entries: 16384 (order: 6, 262144
> bytes)
> >>> [ 0.307360] TCP: Hash tables configured (established 16384 bind
> 16384)
> >>> [ 0.309146] TCP reno registered
> >>> [ 0.310196] UDP hash table entries: 256 (order: 1, 8192 bytes)
> >>> [ 0.311822] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> >>> [ 0.313682] NET: Registered protocol family 1
> >>> [ 0.315006] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> >>> [ 0.316674] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> >>> [ 0.318307] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> >>> [ 0.320480] audit: initializing netlink socket (disabled)
> >>> [ 0.322019] type=2000 audit(1361193885.316:1): initialized
> >>> [ 0.344239] Trying to unpack rootfs image as initramfs...
> >>> [ 0.358871] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> >>> [ 0.365890] VFS: Disk quotas dquot_6.5.2
> >>> [ 0.367186] Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> >>> [ 0.376084] fuse init (API version 7.16)
> >>> [ 0.377439] msgmni has been set to 972
> >>> [ 0.392139] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
> >>> [ 0.394429] io scheduler noop registered
> >>> [ 0.395634] io scheduler deadline registered (default)
> >>> [ 0.397194] io scheduler cfq registered
> >>> [ 0.399476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> >>> [ 0.401085] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> >>> [ 0.402998] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> >>> [ 0.405233] ACPI: Power Button [PWRF]
> >>> [ 0.417377] ERST: Table is not found!
> >>> [ 0.418791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> >>> [ 0.420438] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
> 11 (level, high) -> IRQ 11
> >>> [ 0.432170] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> >>> [ 0.433814] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
> 10 (level, high) -> IRQ 10
> >>> [ 0.438359] Freeing initrd memory: 2000k freed
> >>> [ 0.441355] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> >>> [ 0.443792] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
> 10 (level, high) -> IRQ 10
> >>> [ 0.447889] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> >>> [ 0.472678] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >>> [ 0.496702] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> >>> [ 0.521704] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >>> [ 0.545496] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> >>> [ 0.547267] Linux agpgart interface v0.103
> >>> [ 0.549897] brd: module loaded
> >>> [ 0.551553] loop: module loaded
> >>> [ 0.554797] vda: vda1
> >>> [ 0.556875] scsi0 : ata_piix
> >>> [ 0.558025] scsi1 : ata_piix
> >>> [ 0.559060] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0
> irq 14
> >>> [ 0.560911] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8
> irq 15
> >>> [ 0.563676] Fixed MDIO Bus: probed
> >>> [ 0.565407] PPP generic driver version 2.4.2
> >>> [ 0.567404] tun: Universal TUN/TAP device driver, 1.6
> >>> [ 0.569609] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> >>> [ 0.606807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> >>> [ 0.609530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> >>> [ 0.612116] uhci_hcd: USB Universal Host Controller Interface driver
> >>> [ 0.614760] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
> 10 (level, high) -> IRQ 10
> >>> [ 0.618308] uhci_hcd 0000:00:01.2: UHCI Host Controller
> >>> [ 0.619885] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
> bus number 1
> >>> [ 0.622297] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
> >>> [ 0.624142] hub 1-0:1.0: USB hub found
> >>> [ 0.625358] hub 1-0:1.0: 2 ports detected
> >>> [ 0.626777] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
> at 0x60,0x64 irq 1,12
> >>> [ 0.630038] serio: i8042 KBD port at 0x60,0x64 irq 1
> >>> [ 0.631498] serio: i8042 AUX port at 0x60,0x64 irq 12
> >>> [ 0.633058] mousedev: PS/2 mouse device common for all mice
> >>> [ 0.634804] rtc_cmos 00:01: RTC can wake from S4
> >>> [ 0.636473] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> >>> [ 0.638306] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
> >>> [ 0.640167] device-mapper: uevent: version 1.0.3
> >>> [ 0.641633] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
> initialised: dm-devel@xxxxxxxxxx
> >>> [ 0.644149] cpuidle: using governor ladder
> >>> [ 0.645427] cpuidle: using governor menu
> >>> [ 0.646682] EFI Variables Facility v0.08 2004-May-17
> >>> [ 0.648412] TCP cubic registered
> >>> [ 0.649633] NET: Registered protocol family 10
> >>> [ 0.651585] NET: Registered protocol family 17
> >>> [ 0.652979] Registering the dns_resolver key type
> >>> [ 0.654619] registered taskstats version 1
> >>> [ 0.656246] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input1
> >>> [ 0.671472] Magic number: 1:81:433
> >>> [ 0.672837] rtc_cmos 00:01: setting system clock to 2013-02-18
> 13:24:45 UTC (1361193885)
> >>> [ 0.675260] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> >>> [ 0.676968] EDD information not available.
> >>> [ 0.814934] Freeing unused kernel memory: 900k freed
> >>> [ 0.817578] Write protecting the kernel read-only data: 12288k
> >>> [ 0.827394] Freeing unused kernel memory: 1968k freed
> >>> [ 0.834295] Freeing unused kernel memory: 1368k freed
> >>>
> >>> info: initramfs: up at 0.85
> >>> NOCHANGE: partition 1 is size 64260. it cannot be grown
> >>> info: initramfs loading root from /dev/vda1
> >>> info: /etc/init.d/rc.sysinit: up at 1.09
> >>> [ 1.100339] EXT3-fs (vda1): warning: checktime reached, running
> e2fsck is recommended
> >>> Starting logging: OK
> >>> Initializing random number generator... done.
> >>> Starting network...
> >>> udhcpc (v1.18.5) started
> >>> Sending discover...
> >>> Sending discover...
> >>> Sending discover...
> >>> No lease, failing
> >>> WARN: /etc/rc3.d/S40-network failed
> >>> cloud-setup: checking
> http://169.254.169.254/2009-04-04/meta-data/instance-id
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 1/30: up 10.43. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 2/30: up 11.45. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 3/30: up 12.47. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 4/30: up 13.48. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 5/30: up 14.49. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 6/30: up 15.51. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 7/30: up 16.52. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 8/30: up 17.54. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 9/30: up 18.55. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 10/30: up 19.57. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 11/30: up 20.58. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 12/30: up 21.60. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 13/30: up 22.61. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 14/30: up 23.62. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 15/30: up 24.64. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 16/30: up 25.65. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 17/30: up 26.66. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 18/30: up 27.68. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 19/30: up 28.69. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 20/30: up 29.71. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 21/30: up 30.72. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 22/30: up 31.73. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 23/30: up 32.75. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 24/30: up 33.76. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 25/30: up 34.77. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 26/30: up 35.78. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 27/30: up 36.82. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 28/30: up 37.83. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 29/30: up 38.85. request failed
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-setup: failed 30/30: up 39.86. request failed
> >>> cloud-setup: after 30 fails, debugging
> >>> cloud-setup: running debug (30 tries reached)
> >>> ############ debug start ##############
> >>> ### /etc/rc.d/init.d/sshd start
> >>> /etc/rc3.d/S45-cloud-setup: line 66: /etc/rc.d/init.d/sshd: not found
> >>> route: fscanf
> >>> ### ifconfig -a
> >>> eth0 Link encap:Ethernet HWaddr FA:16:3E:4B:FE:5F
> >>> inet6 addr: fe80::f816:3eff:fe4b:fe5f/64 Scope:Link
> >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> >>> RX packets:13 errors:0 dropped:0 overruns:0 frame:0
> >>> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> >>> collisions:0 txqueuelen:1000
> >>> RX bytes:1706 (1.6 KiB) TX bytes:1224 (1.1 KiB)
> >>>
> >>> lo Link encap:Local Loopback
> >>> inet addr:127.0.0.1 Mask:255.0.0.0
> >>> inet6 addr: ::1/128 Scope:Host
> >>> UP LOOPBACK RUNNING MTU:16436 Metric:1
> >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >>> collisions:0 txqueuelen:0
> >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> >>>
> >>> ### route -n
> >>> Kernel IP routing table
> >>> Destination Gateway Genmask Flags Metric Ref
> Use Iface
> >>> route: fscanf
> >>> ### cat /etc/resolv.conf
> >>> cat: can't open '/etc/resolv.conf': No such file or directory
> >>> ### gateway not found
> >>> /etc/rc3.d/S45-cloud-setup: line 66: can't open /etc/resolv.conf: no
> such file
> >>> ### pinging nameservers
> >>> ### uname -a
> >>> Linux cirros 3.0.0-12-virtual #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC
> 2011 x86_64 GNU/Linux
> >>> ### lsmod
> >>> Module Size Used by Not tainted
> >>> vfat 17585 0
> >>> fat 61475 1 vfat
> >>> isofs 40253 0
> >>> ip_tables 27473 0
> >>> x_tables 29846 1 ip_tables
> >>> pcnet32 42078 0
> >>> 8139cp 27412 0
> >>> ne2k_pci 13691 0
> >>> 8390 18856 1 ne2k_pci
> >>> e1000 108573 0
> >>> acpiphp 24080 0
> >>> ### dmesg | tail
> >>> [ 1.214878] acpiphp: Slot [30] registered
> >>> [ 1.214899] acpiphp: Slot [31] registered
> >>> [ 1.228073] e1000: Intel(R) PRO/1000 Network Driver - version
> 7.3.21-k8-NAPI
> >>> [ 1.228076] e1000: Copyright (c) 1999-2006 Intel Corporation.
> >>> [ 1.236351] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> >>> [ 1.242803] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar
> 22, 2004)
> >>> [ 1.250444] pcnet32: pcnet32.c:v1.35 21.Apr.2008
> tsbogend@xxxxxxxxxxxxxxxx
> >>> [ 1.260202] ip_tables: (C) 2000-2006 Netfilter Core Team
> >>> [ 1.344253] Refined TSC clocksource calibration: 2387.967 MHz.
> >>> [ 2.108346] eth0: IPv6 duplicate address fe80::f816:3eff:fe4b:fe5f
> detected!
> >>> ### tail -n 25 /var/log/messages
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.948101] usb 1-1: new
> full speed USB device number 2 using uhci_hcd
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.971567] EXT3-fs:
> barriers not enabled
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.971818] kjournald
> starting. Commit interval 5 seconds
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.971836] EXT3-fs
> (vda1): mounted filesystem with ordered data mode
> >>> Feb 18 06:24:46 cirros kern.warn kernel: [ 1.100339] EXT3-fs
> (vda1): warning: checktime reached, running e2fsck is recommended
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.103064] EXT3-fs
> (vda1): using internal journal
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.213929] acpiphp: ACPI
> Hot Plug PCI Controller Driver version: 0.5
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214172] acpiphp: Slot
> [1] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214207] acpiphp: Slot
> [2] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214228] acpiphp: Slot
> [3] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214249] acpiphp: Slot
> [4] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214289] acpiphp: Slot
> [5] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214312] acpiphp: Slot
> [6] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214335] acpiphp: Slot
> [7] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214358] acpiphp: Slot
> [8] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214380] acpiphp: Slot
> [9] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214403] acpiphp: Slot
> [10] registered
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.228073] e1000:
> Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.228076] e1000:
> Copyright (c) 1999-2006 Intel Corporation.
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.236351]
> ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.242803] 8139cp:
> 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.250444] pcnet32:
> pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.260202] ip_tables:
> (C) 2000-2006 Netfilter Core Team
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.344253] Refined TSC
> clocksource calibration: 2387.967 MHz.
> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 2.108346] eth0: IPv6
> duplicate address fe80::f816:3eff:fe4b:fe5f detected!
> >>> ############ debug end ##############
> >>> cloud-setup: failed to read iid from metadata. tried 30
> >>> WARN: /etc/rc3.d/S45-cloud-setup failed
> >>> Starting dropbear sshd: generating rsa key... generating dsa key... OK
> >>> ===== cloud-final: system completely up in 41.37 seconds ====
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> instance-id:
> >>> public-ipv4:
> >>> local-ipv4 :
> >>> wget: can't connect to remote host (169.254.169.254): Network is
> unreachable
> >>> cloud-userdata: failed to read instance id
> >>> WARN: /etc/rc3.d/S99-cloud-userdata failed
> >>> ____ ____ ____
> >>> / __/ __ ____ ____ / __ \/ __/
> >>> / /__ / // __// __// /_/ /\ \
> >>> \___//_//_/ /_/ \____/___/
> >>> http://launchpad.net/cirros
> >>>
> >>>
> >>>
> >>> login as 'cirros' user. default password: 'cubswin:)'. use 'sudo' for
> root.
> >>>
> >>> cirros login:
> >>>
> >>>
> >>> Additionally when I try to create more than 5 instances it throws the
> following exception.
> >>>
> >>>
> >>>
> >>>
> >>> Error: Quota exceeded for instances: Requested 1, but already used 10
> of 10 instances (HTTP 413) (Request-ID:
> req-09f00a85-900b-4f11-94fe-e7f8e4311032)
> >>>
> >>>
> >>>
> >>>
> >>> Thanks.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> On 18 February 2013 13:30, Chathura M. Sarathchandra Magurawalage <
> 77.chathura@xxxxxxxxx> wrote:
> >>>>
> >>>> Yes definitely I will post it here for future reference for anybody.
> >>>>
> >>>> On 18 February 2013 13:28, Guilherme Russi <
> luisguilherme.cr@xxxxxxxxx> wrote:
> >>>>>
> >>>>> Got it, I have one virtual interface too, to make the management and
> VM conf part. If you find anything, let me know, please.
> >>>>>
> >>>>> Thanks.
> >>>>>
> >>>>>
> >>>>>
> >>>>> 2013/2/18 Chathura M. Sarathchandra Magurawalage <
> 77.chathura@xxxxxxxxx>
> >>>>>>
> >>>>>> I have only got 1 NIC but got two virtual interface for two
> different networks. I have got network node in the same physical machine
> too.
> >>>>>>
> >>>>>>
> >>>>>> On 18 February 2013 13:15, Guilherme Russi <
> luisguilherme.cr@xxxxxxxxx> wrote:
> >>>>>>>
> >>>>>>> How did you install your controller node? I mean, mine I have 2
> NICs and I installed the network node at the same physical machine.
> >>>>>>>
> >>>>>>>
> >>>>>>> 2013/2/18 Chathura M. Sarathchandra Magurawalage <
> 77.chathura@xxxxxxxxx>
> >>>>>>>
> >>>>>>>> Hello Guilherme,
> >>>>>>>>
> >>>>>>>> No, I am still having the problem :(
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On 18 February 2013 13:01, Guilherme Russi <
> luisguilherme.cr@xxxxxxxxx> wrote:
> >>>>>>>>>
> >>>>>>>>> Hello Chathura,
> >>>>>>>>>
> >>>>>>>>> Have succeeded with your network? I'm having problems with mine
> too.
> >>>>>>>>>
> >>>>>>>>> Thanks.
> >>>>>>>>>
> >>>>>>>>> Guilherme.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> 2013/2/17 Chathura M. Sarathchandra Magurawalage <
> 77.chathura@xxxxxxxxx>
> >>>>>>>>>
> >>>>>>>>>> Hope you had a good night sleep :)
> >>>>>>>>>>
> >>>>>>>>>> Yes sure I will be on irc. my nickname is chathura77
> >>>>>>>>>>
> >>>>>>>>>> Thanks
> >>>>>>>>>>
> >>>>>>>>>> On 17 February 2013 13:15, Jean-Baptiste RANSY <
> jean-baptiste.ransy@xxxxxxxxxx> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> ping
> >>>>>>>>>>>
> >>>>>>>>>>> Are you on IRC ?
> >>>>>>>>>>>
> >>>>>>>>>>> JB
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 02/17/2013 04:07 AM, Jean-Baptiste RANSY wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> Add Cirros Image to Glance :)
> >>>>>>>>>>>
> >>>>>>>>>>> Username: cirros
> >>>>>>>>>>> Password: cubswin:)
> >>>>>>>>>>>
> >>>>>>>>>>>
> http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html
> >>>>>>>>>>>
> >>>>>>>>>>> to join your VM, it's a bit dirty but you can :
> >>>>>>>>>>> - put your computer in the same subnet as your controller (
> 192.168.2.0/24)
> >>>>>>>>>>> - then adds a static route to the subnet of your VM. (ip route
> add 10.5.5.0/24 gw 192.168.2.151)
> >>>>>>>>>>> (192.168.2.151 is the quantum gateway)
> >>>>>>>>>>>
> >>>>>>>>>>> I'm going to sleep, we will continue tomorrow.
> >>>>>>>>>>>
> >>>>>>>>>>> JB
> >>>>>>>>>>>
> >>>>>>>>>>> PS : You also should get some sleep :)
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 02/17/2013 03:53 AM, Chathura M. Sarathchandra Magurawalage
> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> oh that's weird.
> >>>>>>>>>>>
> >>>>>>>>>>> I still get this error. couldnt this be because I cannot ping
> the VM in the first place?. Because as far as I know metadata takes care of
> ssh keys. But what if you cant reach the VM in the first place?
> >>>>>>>>>>>
> >>>>>>>>>>> no instance data found in start-local
> >>>>>>>>>>>
> >>>>>>>>>>> ci-info: lo : 1 127.0.0.1 255.0.0.0 .
> >>>>>>>>>>>
> >>>>>>>>>>> ci-info: eth0 : 1 10.5.5.3 255.255.255.0
> fa:16:3e:a7:28:25
> >>>>>>>>>>>
> >>>>>>>>>>> ci-info: route-0: 0.0.0.0 10.5.5.1 0.0.0.0
> eth0 UG
> >>>>>>>>>>>
> >>>>>>>>>>> ci-info: route-1: 10.5.5.0 0.0.0.0
> 255.255.255.0 eth0 U
> >>>>>>>>>>>
> >>>>>>>>>>> cloud-init start running: Sun, 17 Feb 2013 02:45:35 +0000. up
> 3.51 seconds
> >>>>>>>>>>>
> >>>>>>>>>>> 2013-02-17 02:48:25,840 - util.py[WARNING]: '
> http://169.254.169.254/2009-04-04/meta-data/instance-id' failed
> [50/120s]: url error [timed out]
> >>>>>>>>>>>
> >>>>>>>>>>> 2013-02-17 02:49:16,893 - util.py[WARNING]: '
> http://169.254.169.254/2009-04-04/meta-data/instance-id' failed
> [101/120s]: url error [timed out]
> >>>>>>>>>>>
> >>>>>>>>>>> 2013-02-17 02:49:34,912 - util.py[WARNING]: '
> http://169.254.169.254/2009-04-04/meta-data/instance-id' failed
> [119/120s]: url error [timed out]
> >>>>>>>>>>>
> >>>>>>>>>>> 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]: giving
> up on md after 120 seconds
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> no instance data found in start
> >>>>>>>>>>>
> >>>>>>>>>>> Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
> >>>>>>>>>>>
> >>>>>>>>>>> * Starting AppArmor profiles [80G
> >>>>>>>>>>> [74G[ OK ]
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 17 February 2013 02:41, Jean-Baptiste RANSY <
> jean-baptiste.ransy@xxxxxxxxxx> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>> For me, it's normal that you are not able to curl
> 169.254.169.254 from your compute and controller nodes : Same thing on my
> side, but my VM get their metadata.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Try to lunch an instance.
> >>>>>>>>>>>>
> >>>>>>>>>>>> JB
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> On 02/17/2013 03:35 AM, Chathura M. Sarathchandra
> Magurawalage wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>> root@computernode:~# curl -v http://169.254.169.254
> >>>>>>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
> >>>>>>>>>>>> * Trying 169.254.169.254...
> >>>>>>>>>>>>
> >>>>>>>>>>>> root@controller:~# curl -v http://169.254.169.254
> >>>>>>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
> >>>>>>>>>>>> * Trying 169.254.169.254...
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> root@athena:~# iptables -L -n -v
> >>>>>>>>>>>> Chain INPUT (policy ACCEPT 59009 packets, 22M bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 59493 22M quantum-l3-agent-INPUT all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 59493 22M nova-api-INPUT all -- * * 0.0.0.0/0
> 0.0.0.0/0
> >>>>>>>>>>>> 484 73533 ACCEPT 47 -- * * 0.0.0.0/0
> 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain FORWARD (policy ACCEPT 707 packets, 47819 bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 707 47819 quantum-filter-top all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 707 47819 quantum-l3-agent-FORWARD all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 707 47819 nova-filter-top all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 707 47819 nova-api-FORWARD all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain OUTPUT (policy ACCEPT 56022 packets, 22M bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 56022 22M quantum-filter-top all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 56022 22M quantum-l3-agent-OUTPUT all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 56022 22M nova-filter-top all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 56022 22M nova-api-OUTPUT all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-FORWARD (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-INPUT (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 ACCEPT tcp -- * * 0.0.0.0/0
> 192.168.2.225 tcp dpt:8775
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-OUTPUT (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-local (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-filter-top (2 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 56729 22M nova-api-local all -- * * 0.0.0.0/0
> 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-filter-top (2 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 56729 22M quantum-l3-agent-local all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-FORWARD (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-INPUT (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 ACCEPT tcp -- * * 0.0.0.0/0
> 192.168.2.225 tcp dpt:8775
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-OUTPUT (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-local (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> root@athena:~# iptables -L -n -v -t nat
> >>>>>>>>>>>> Chain PREROUTING (policy ACCEPT 3212 packets, 347K bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 3212 347K quantum-l3-agent-PREROUTING all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 3212 347K nova-api-PREROUTING all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain INPUT (policy ACCEPT 639 packets, 84948 bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain OUTPUT (policy ACCEPT 3180 packets, 213K bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 3180 213K quantum-l3-agent-OUTPUT all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 3180 213K nova-api-OUTPUT all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 3726 247K quantum-l3-agent-POSTROUTING all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 0 0 nova-api-POSTROUTING all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 0 0 quantum-postrouting-bottom all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 0 0 nova-postrouting-bottom all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-OUTPUT (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-POSTROUTING (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-PREROUTING (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-float-snat (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-api-snat (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 nova-api-float-snat all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain nova-postrouting-bottom (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 nova-api-snat all -- * * 0.0.0.0/0
> 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-OUTPUT (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-POSTROUTING (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 3726 247K ACCEPT all -- !qg-6f8374cb-cb
> !qg-6f8374cb-cb 0.0.0.0/0 0.0.0.0/0 ! ctstate DNAT
> >>>>>>>>>>>> 0 0 ACCEPT all -- * * 10.5.5.0/24
> 192.168.2.225
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-PREROUTING (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 DNAT tcp -- * * 0.0.0.0/0
> 169.254.169.254 tcp dpt:80 to:192.168.2.225:8775
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-float-snat (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-l3-agent-snat (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 quantum-l3-agent-float-snat all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>> 0 0 SNAT all -- * * 10.5.5.0/24
> 0.0.0.0/0 to:192.168.2.151
> >>>>>>>>>>>>
> >>>>>>>>>>>> Chain quantum-postrouting-bottom (1 references)
> >>>>>>>>>>>> pkts bytes target prot opt in out source
> destination
> >>>>>>>>>>>> 0 0 quantum-l3-agent-snat all -- * *
> 0.0.0.0/0 0.0.0.0/0
> >>>>>>>>>>>>
> >>>>>>>>>>>> thanks.
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> On 17 February 2013 02:25, Jean-Baptiste RANSY <
> jean-baptiste.ransy@xxxxxxxxxx> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Controller node :
> >>>>>>>>>>>>> # iptables -L -n -v
> >>>>>>>>>>>>> # iptables -L -n -v -t nat
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> On 02/17/2013 03:18 AM, Chathura M. Sarathchandra
> Magurawalage wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> You should be able to curl 169.254.169.254 from compute
> node, which I cant at the moment.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I have got the bridge set up in the l3_agent.ini
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> _______________________________________________
> >>>>>>>>>>> Mailing list: https://launchpad.net/~openstack
> >>>>>>>>>>> Post to : openstack@xxxxxxxxxxxxxxxxxxx
> >>>>>>>>>>> Unsubscribe : https://launchpad.net/~openstack
> >>>>>>>>>>> More help : https://help.launchpad.net/ListHelp
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> Mailing list: https://launchpad.net/~openstack
> >>>>>>>>>> Post to : openstack@xxxxxxxxxxxxxxxxxxx
> >>>>>>>>>> Unsubscribe : https://launchpad.net/~openstack
> >>>>>>>>>> More help : https://help.launchpad.net/ListHelp
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> Mailing list: https://launchpad.net/~openstack
> >> Post to : openstack@xxxxxxxxxxxxxxxxxxx
> >> Unsubscribe : https://launchpad.net/~openstack
> >> More help : https://help.launchpad.net/ListHelp
> >>
> >
> > _______________________________________________
> > Mailing list: https://launchpad.net/~openstack
> > Post to : openstack@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~openstack
> > More help : https://help.launchpad.net/ListHelp
> >
>
Follow ups
References
-
Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-14
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-16
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-16
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-16
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-16
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-16
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-16
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Richard Whitney, 2013-02-18
-
Re: Cant ping private or floating IP
From: JuanFra Rodriguez Cardoso, 2013-02-18
