openstack team mailing list archive
-
openstack team
-
Mailing list archive
-
Message #21032
Re: Cant ping private or floating IP
Has anyone got an idea of what is going wrong. Please find my configuration
and log files if you need them.
https://www.dropbox.com/s/qyfcsn50060y304/confilesnlogs.tar
Any help would be appreciated.
Thanks.
On 19 February 2013 13:04, Chathura M. Sarathchandra Magurawalage <
77.chathura@xxxxxxxxx> wrote:
> Thanks.
>
> It seems like I do not get the error anymore. But I still get the
> following error message. But I do not know its related to the issue.
>
> *2013-02-19 13:00:12.548+0000: 5295: info : libvirt version: 0.9.13*
> *2013-02-19 13:00:12.548+0000: 5295: error :
> virNWFilterSnoopLeaseFileRefresh:1882 :
> open("/var/run/libvirt/network/nwfilter.ltmp"): No such file or directory*
>
>
> On 19 February 2013 09:39, JuanFra Rodriguez Cardoso <
> juanfra.rodriguez.cardoso@xxxxxxxxx> wrote:
>
>> Sorry guys, I wrote the wrong value.
>> I meant:
>>
>> Try libvirt_cpu_mode = host-passthrough
>>
>>
>> Regards,
>> JuanFra
>>
>>
>> 2013/2/18 Guilherme Russi <luisguilherme.cr@xxxxxxxxx>:
>> > I was looking my log and I got a similar error, and this change on
>> > /etc/nova/nova.conf haven't worked.
>> >
>> > Thanks.
>> >
>> > Guilherme.
>> >
>> >
>> >
>> > 2013/2/18 Chathura M. Sarathchandra Magurawalage <77.chathura@xxxxxxxxx
>> >
>> >>
>> >> Hello,
>> >>
>> >> I have qemu-kvm package installed.
>> >>
>> >> I have tried libvirt_cpu_mode = host-model on /etc/nova.conf but did
>> not
>> >> work.
>> >>
>> >> Thanks.
>> >>
>> >> On 18 February 2013 19:21, JuanFra Rodriguez Cardoso
>> >> <juanfra.rodriguez.cardoso@xxxxxxxxx> wrote:
>> >>>
>> >>> Hi Chathura:
>> >>>
>> >>> Try libvirt_cpu_mode = host-model on /etc/nova.conf
>> >>>
>> >>> Reference: https://wiki.openstack.org/wiki/LibvirtXMLCPUModel
>> >>>
>> >>> Regards,
>> >>> JuanFra
>> >>>
>> >>>
>> >>> 2013/2/18 Richard Whitney <rw@xxxxxxxxxxxxxxxxxx>
>> >>> >
>> >>> > Try QEMU instead.
>> >>> >
>> >>> > Cheers,
>> >>> >
>> >>> > __________________________________
>> >>> > Richard Whitney
>> >>> > Federal SE Team Lead
>> >>> > JNCIE-SP, BCNE, BCFP
>> >>> > Arista Networks, Inc.
>> >>> > Mobile: 703-627-6092
>> >>> > Support: : 866-476-0000
>> >>> >
>> >>> > On Feb 18, 2013 1:04 PM, "Chathura M. Sarathchandra Magurawalage"
>> >>> > <77.chathura@xxxxxxxxx> wrote:
>> >>> >>
>> >>> >> Hello guys,
>> >>> >>
>> >>> >> I think I have found something which could be the potential cause
>> of
>> >>> >> this problem. I checked my /var/log/libvirt/libvirtd.log and found
>> this.
>> >>> >> These errors occur when I spawn a VM or on reboot.
>> >>> >>
>> >>> >> 2013-02-18 14:38:04.654+0000: 22383: info : libvirt version: 0.9.13
>> >>> >> 2013-02-18 14:38:04.654+0000: 22383: error :
>> >>> >> virNWFilterSnoopLeaseFileRefresh:1882 :
>> >>> >> open("/var/run/libvirt/network/nwfilter.ltmp"): No such file or
>> directory
>> >>> >> 2013-02-18 17:53:53.793+0000: 22372: error :
>> >>> >> virNWFilterDHCPSnoopEnd:2113 : internal error ifname "vnet0" not
>> in key map
>> >>> >> 2013-02-18 17:53:53.795+0000: 22372: error : virNetDevGetIndex:657
>> :
>> >>> >> Unable to get index for interface vnet0: No such device
>> >>> >> 2013-02-18 17:53:58.311+0000: 22370: warning : x86Decode:1346 :
>> >>> >> Preferred CPU model SandyBridge not allowed by hypervisor; closest
>> supported
>> >>> >> model will be used
>> >>> >> (END)
>> >>> >>
>> >>> >>
>> >>> >> Could this be the problem?
>> >>> >>
>> >>> >> Thanks
>> >>> >>
>> >>> >>
>> >>> >>
>> -----------------------------------------------------------------------------------------------------------------------------
>> >>> >> Chathura Madhusanka Sarathchandra Magurawalage.
>> >>> >> 1NW.2.1, Desk 2
>> >>> >> School of Computer Science and Electronic Engineering
>> >>> >> University Of Essex
>> >>> >> United Kingdom.
>> >>> >>
>> >>> >> Email: csarata@xxxxxxxxxxx
>> >>> >> chathura.sarathchandra@xxxxxxxxx
>> >>> >> 77.chathura@xxxxxxxxx
>> >>> >>
>> >>> >>
>> >>> >> On 18 February 2013 14:37, Chathura M. Sarathchandra Magurawalage
>> >>> >> <77.chathura@xxxxxxxxx> wrote:
>> >>> >>>
>> >>> >>> I have spawned a VM using cirros-0.3.0-x86_64 image, but it hangs
>> on
>> >>> >>> the bootup. The log is as follows.
>> >>> >>>
>> >>> >>> [ 0.000000] Initializing cgroup subsys cpuset
>> >>> >>> [ 0.000000] Initializing cgroup subsys cpu
>> >>> >>> [ 0.000000] Linux version 3.0.0-12-virtual (buildd@crested)
>> (gcc
>> >>> >>> version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri
>> Oct 7
>> >>> >>> 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
>> >>> >>> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
>> >>> >>> console=ttyS0 console=hvc0
>> >>> >>> [ 0.000000] KERNEL supported cpus:
>> >>> >>> [ 0.000000] Intel GenuineIntel
>> >>> >>> [ 0.000000] AMD AuthenticAMD
>> >>> >>> [ 0.000000] Centaur CentaurHauls
>> >>> >>> [ 0.000000] BIOS-provided physical RAM map:
>> >>> >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00
>> >>> >>> (usable)
>> >>> >>> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000
>> >>> >>> (usable)
>> >>> >>> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] NX (Execute Disable) protection: active
>> >>> >>> [ 0.000000] DMI 2.4 present.
>> >>> >>> [ 0.000000] No AGP bridge found
>> >>> >>> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
>> >>> >>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new
>> >>> >>> 0x7010600070106
>> >>> >>> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
>> >>> >>> [ 0.000000] init_memory_mapping:
>> 0000000000000000-000000001fffd000
>> >>> >>> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
>> >>> >>> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
>> >>> >>> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS
>> BXPCRSDT
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS
>> BXPCFACP
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC
>> BXDSDT
>> >>> >>> 00000001 INTL 20100528)
>> >>> >>> [ 0.000000] ACPI: FACS 000000001fffff40 00040
>> >>> >>> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS
>> BXPCSSDT
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS
>> BXPCAPIC
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS
>> BXPCHPET
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] No NUMA configuration found
>> >>> >>> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
>> >>> >>> [ 0.000000] Initmem setup node 0
>> 0000000000000000-000000001fffd000
>> >>> >>> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
>> >>> >>> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
>> >>> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
>> >>> >>> [ 0.000000] Zone PFN ranges:
>> >>> >>> [ 0.000000] DMA 0x00000010 -> 0x00001000
>> >>> >>> [ 0.000000] DMA32 0x00001000 -> 0x00100000
>> >>> >>> [ 0.000000] Normal empty
>> >>> >>> [ 0.000000] Movable zone start PFN for each node
>> >>> >>> [ 0.000000] early_node_map[2] active PFN ranges
>> >>> >>> [ 0.000000] 0: 0x00000010 -> 0x0000009d
>> >>> >>> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
>> >>> >>> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
>> >>> >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> >>> >>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000]
>> >>> >>> gsi_base[0])
>> >>> >>> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address
>> 0xfec00000,
>> >>> >>> GSI 0-23
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
>> >>> >>> dfl)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> >>> >>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> >>> >>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 000000000009d000 -
>> >>> >>> 000000000009e000
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
>> >>> >>> 00000000000a0000
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
>> >>> >>> 00000000000f0000
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
>> >>> >>> 0000000000100000
>> >>> >>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
>> >>> >>> 20000000:deffc000)
>> >>> >>> [ 0.000000] Booting paravirtualized kernel on KVM
>> >>> >>> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
>> >>> >>> nr_cpu_ids:1 nr_node_ids:1
>> >>> >>> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000
>> s79296
>> >>> >>> r8192 d23104 u2097152
>> >>> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
>> >>> >>> [ 0.000000] KVM setup async PF for cpu 0
>> >>> >>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
>> on.
>> >>> >>> Total pages: 129157
>> >>> >>> [ 0.000000] Policy zone: DMA32
>> >>> >>> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro
>> >>> >>> console=tty0 console=ttyS0 console=hvc0
>> >>> >>> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384
>> bytes)
>> >>> >>> [ 0.000000] Checking aperture...
>> >>> >>> [ 0.000000] No AGP bridge found
>> >>> >>> [ 0.000000] Memory: 497852k/524276k available (6206k kernel
>> code,
>> >>> >>> 460k absent, 25964k reserved, 6907k data, 900k init)
>> >>> >>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3,
>> >>> >>> MinObjects=0, CPUs=1, Nodes=1
>> >>> >>> [ 0.000000] Hierarchical RCU implementation.
>> >>> >>> [ 0.000000] RCU dyntick-idle grace-period acceleration is
>> >>> >>> enabled.
>> >>> >>> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
>> >>> >>> [ 0.000000] Console: colour VGA+ 80x25
>> >>> >>> [ 0.000000] console [tty0] enabled
>> >>> >>> [ 0.000000] console [ttyS0] enabled
>> >>> >>> [ 0.000000] allocated 4194304 bytes of page_cgroup
>> >>> >>> [ 0.000000] please try 'cgroup_disable=memory' option if you
>> don't
>> >>> >>> want memory cgroups
>> >>> >>> [ 0.000000] Detected 3392.282 MHz processor.
>> >>> >>> [ 0.008000] Calibrating delay loop (skipped) preset value..
>> >>> >>> 6784.56 BogoMIPS (lpj=13569128)
>> >>> >>> [ 0.008000] pid_max: default: 32768 minimum: 301
>> >>> >>> [ 0.008000] Security Framework initialized
>> >>> >>> [ 0.008000] AppArmor: AppArmor initialized
>> >>> >>> [ 0.008000] Yama: becoming mindful.
>> >>> >>> [ 0.008000] Dentry cache hash table entries: 65536 (order: 7,
>> >>> >>> 524288 bytes)
>> >>> >>> [ 0.008311] Inode-cache hash table entries: 32768 (order: 6,
>> >>> >>> 262144 bytes)
>> >>> >>> [ 0.009201] Mount-cache hash table entries: 256
>> >>> >>> [ 0.009886] Initializing cgroup subsys cpuacct
>> >>> >>> [ 0.010420] Initializing cgroup subsys memory
>> >>> >>> [ 0.010935] Initializing cgroup subsys devices
>> >>> >>> [ 0.011450] Initializing cgroup subsys freezer
>> >>> >>> [ 0.012006] Initializing cgroup subsys net_cls
>> >>> >>> [ 0.012517] Initializing cgroup subsys blkio
>> >>> >>> [ 0.013021] Initializing cgroup subsys perf_event
>> >>> >>> [ 0.013606] CPU: CPU feature xsave disabled, no CPUID level 0xd
>> >>> >>> [ 0.014314] mce: CPU supports 10 MCE banks
>> >>> >>> [ 0.015067] SMP alternatives: switching to UP code
>> >>> >>> [ 0.031928] Freeing SMP alternatives: 24k freed
>> >>> >>> [ 0.032017] ACPI: Core revision 20110413
>> >>> >>> [ 0.033120] ftrace: allocating 26075 entries in 103 pages
>> >>> >>> [ 0.040157] Enabling x2apic
>> >>> >>> [ 0.040543] Enabled x2apic
>> >>> >>> [ 0.041005] Switched APIC routing to physical x2apic.
>> >>> >>> [ 0.042112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1
>> pin2=-1
>> >>> >>> [ 0.042735] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @
>> 2.40GHz
>> >>> >>> stepping 0b
>> >>> >>> [ 0.044002] Performance Events: unsupported p6 CPU model 15 no
>> PMU
>> >>> >>> driver, software events only.
>> >>> >>> [ 0.044002] Brought up 1 CPUs
>> >>> >>> [ 0.044002] Total of 1 processors activated (6784.56 BogoMIPS).
>> >>> >>> [ 0.044002] devtmpfs: initialized
>> >>> >>> [ 0.044758] print_constraints: dummy:
>> >>> >>> [ 0.045261] Time: 13:23:57 Date: 02/18/13
>> >>> >>> [ 0.045781] NET: Registered protocol family 16
>> >>> >>> [ 0.046397] ACPI: bus type pci registered
>> >>> >>> [ 0.046931] PCI: Using configuration type 1 for base access
>> >>> >>> [ 0.047944] bio: create slab <bio-0> at 0
>> >>> >>> [ 0.049221] ACPI: Interpreter enabled
>> >>> >>> [ 0.049724] ACPI: (supports S0 S3 S4 S5)
>> >>> >>> [ 0.050400] ACPI: Using IOAPIC for interrupt routing
>> >>> >>> [ 0.053342] ACPI: No dock devices found.
>> >>> >>> [ 0.053823] HEST: Table not found.
>> >>> >>> [ 0.054309] PCI: Ignoring host bridge windows from ACPI; if
>> >>> >>> necessary, use "pci=use_crs" and report a bug
>> >>> >>> [ 0.055363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus
>> 00-ff])
>> >>> >>> [ 0.057394] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f]
>> claimed
>> >>> >>> by PIIX4 ACPI
>> >>> >>> [ 0.058290] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f]
>> claimed
>> >>> >>> by PIIX4 SMB
>> >>> >>> [ 0.070449] pci0000:00: Unable to request _OSC control (_OSC
>> >>> >>> support mask: 0x1e)
>> >>> >>> [ 0.077527] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>> >>> >>> [ 0.079626] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>> >>> >>> [ 0.081053] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>> >>> >>> [ 0.083131] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>> >>> >>> [ 0.085052] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
>> >>> >>> [ 0.086160] vgaarb: device added:
>> >>> >>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> >>> >>> [ 0.087084] vgaarb: loaded
>> >>> >>> [ 0.088006] vgaarb: bridge control possible 0000:00:02.0
>> >>> >>> [ 0.088772] SCSI subsystem initialized
>> >>> >>> [ 0.089402] usbcore: registered new interface driver usbfs
>> >>> >>> [ 0.090049] usbcore: registered new interface driver hub
>> >>> >>> [ 0.090671] usbcore: registered new device driver usb
>> >>> >>> [ 0.091366] PCI: Using ACPI for IRQ routing
>> >>> >>> [ 0.092226] NetLabel: Initializing
>> >>> >>> [ 0.092659] NetLabel: domain hash size = 128
>> >>> >>> [ 0.093166] NetLabel: protocols = UNLABELED CIPSOv4
>> >>> >>> [ 0.093735] NetLabel: unlabeled traffic allowed by default
>> >>> >>> [ 0.094424] HPET: 3 timers in total, 0 timers will be used for
>> >>> >>> per-cpu timer
>> >>> >>> [ 0.095239] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> >>> >>> [ 0.096008] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
>> >>> >>> [ 0.100104] Switching to clocksource kvm-clock
>> >>> >>> [ 0.103381] Switched to NOHz mode on CPU #0
>> >>> >>> [ 0.105479] AppArmor: AppArmor Filesystem Enabled
>> >>> >>> [ 0.106028] pnp: PnP ACPI init
>> >>> >>> [ 0.106426] ACPI: bus type pnp registered
>> >>> >>> [ 0.107361] pnp: PnP ACPI: found 8 devices
>> >>> >>> [ 0.107834] ACPI: ACPI bus type pnp unregistered
>> >>> >>> [ 0.113757] NET: Registered protocol family 2
>> >>> >>> [ 0.114308] IP route cache hash table entries: 4096 (order: 3,
>> >>> >>> 32768 bytes)
>> >>> >>> [ 0.115168] TCP established hash table entries: 16384 (order:
>> 6,
>> >>> >>> 262144 bytes)
>> >>> >>> [ 0.116126] TCP bind hash table entries: 16384 (order: 6,
>> 262144
>> >>> >>> bytes)
>> >>> >>> [ 0.116924] TCP: Hash tables configured (established 16384 bind
>> >>> >>> 16384)
>> >>> >>> [ 0.117635] TCP reno registered
>> >>> >>> [ 0.118036] UDP hash table entries: 256 (order: 1, 8192 bytes)
>> >>> >>> [ 0.118658] UDP-Lite hash table entries: 256 (order: 1, 8192
>> >>> >>> bytes)
>> >>> >>> [ 0.119360] NET: Registered protocol family 1
>> >>> >>> [ 0.119870] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>> >>> >>> [ 0.120514] pci 0000:00:01.0: PIIX3: Enabling Passive Release
>> >>> >>> [ 0.121133] pci 0000:00:01.0: Activating ISA DMA hang
>> workarounds
>> >>> >>> [ 0.122087] Trying to unpack rootfs image as initramfs...
>> >>> >>> [ 0.128136] audit: initializing netlink socket (disabled)
>> >>> >>> [ 0.128732] type=2000 audit(1361193838.124:1): initialized
>> >>> >>> [ 0.156191] HugeTLB registered 2 MB page size, pre-allocated 0
>> >>> >>> pages
>> >>> >>> [ 0.160939] VFS: Disk quotas dquot_6.5.2
>> >>> >>> [ 0.161482] Dquot-cache hash table entries: 512 (order 0, 4096
>> >>> >>> bytes)
>> >>> >>> [ 0.167538] Freeing initrd memory: 2000k freed
>> >>> >>> [ 0.168234] fuse init (API version 7.16)
>> >>> >>> [ 0.168760] msgmni has been set to 976
>> >>> >>> [ 0.172508] Block layer SCSI generic (bsg) driver version 0.4
>> >>> >>> loaded (major 253)
>> >>> >>> [ 0.173426] io scheduler noop registered
>> >>> >>> [ 0.173901] io scheduler deadline registered (default)
>> >>> >>> [ 0.174499] io scheduler cfq registered
>> >>> >>> [ 0.175032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> >>> >>> [ 0.175661] pciehp: PCI Express Hot Plug Controller Driver
>> >>> >>> version: 0.4
>> >>> >>> [ 0.176455] input: Power Button as
>> >>> >>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>> >>> >>> [ 0.177316] ACPI: Power Button [PWRF]
>> >>> >>> [ 0.178304] ERST: Table is not found!
>> >>> >>> [ 0.178861] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>> >>> >>> [ 0.179487] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] ->
>> >>> >>> GSI 11 (level, high) -> IRQ 11
>> >>> >>> [ 0.180578] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>> >>> >>> [ 0.181201] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] ->
>> >>> >>> GSI 10 (level, high) -> IRQ 10
>> >>> >>> [ 0.182651] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>> >>> >>> [ 0.184109] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] ->
>> >>> >>> GSI 10 (level, high) -> IRQ 10
>> >>> >>> [ 0.186494] Serial: 8250/16550 driver, 32 ports, IRQ sharing
>> >>> >>> enabled
>> >>> >>> [ 0.209836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a
>> 16550A
>> >>> >>> [ 0.231178] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a
>> 16550A
>> >>> >>> [ 0.252936] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> >>> >>> [ 0.276078] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> >>> >>> [ 0.276821] Linux agpgart interface v0.103
>> >>> >>> [ 0.277915] brd: module loaded
>> >>> >>> [ 0.278589] loop: module loaded
>> >>> >>> [ 0.296757] vda: vda1
>> >>> >>> [ 0.298843] scsi0 : ata_piix
>> >>> >>> [ 0.299883] scsi1 : ata_piix
>> >>> >>> [ 0.300868] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma
>> 0xc0a0
>> >>> >>> irq 14
>> >>> >>> [ 0.302557] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma
>> 0xc0a8
>> >>> >>> irq 15
>> >>> >>> [ 0.304569] Fixed MDIO Bus: probed
>> >>> >>> [ 0.305629] PPP generic driver version 2.4.2
>> >>> >>> [ 0.306840] tun: Universal TUN/TAP device driver, 1.6
>> >>> >>> [ 0.308173] tun: (C) 1999-2004 Max Krasnyansky <
>> maxk@xxxxxxxxxxxx>
>> >>> >>> [ 0.384685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>> >>> >>> Driver
>> >>> >>> [ 0.386400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
>> Driver
>> >>> >>> [ 0.387933] uhci_hcd: USB Universal Host Controller Interface
>> >>> >>> driver
>> >>> >>> [ 0.389589] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] ->
>> GSI
>> >>> >>> 10 (level, high) -> IRQ 10
>> >>> >>> [ 0.391806] uhci_hcd 0000:00:01.2: UHCI Host Controller
>> >>> >>> [ 0.393273] uhci_hcd 0000:00:01.2: new USB bus registered,
>> >>> >>> assigned bus number 1
>> >>> >>> [ 0.395388] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
>> >>> >>> [ 0.397118] hub 1-0:1.0: USB hub found
>> >>> >>> [ 0.397792] hub 1-0:1.0: 2 ports detected
>> >>> >>> [ 0.398326] i8042: PNP: PS/2 Controller
>> [PNP0303:KBD,PNP0f13:MOU]
>> >>> >>> at 0x60,0x64 irq 1,12
>> >>> >>> [ 0.399659] serio: i8042 KBD port at 0x60,0x64 irq 1
>> >>> >>> [ 0.400272] serio: i8042 AUX port at 0x60,0x64 irq 12
>> >>> >>> [ 0.400857] mousedev: PS/2 mouse device common for all mice
>> >>> >>> [ 0.401539] rtc_cmos 00:01: RTC can wake from S4
>> >>> >>> [ 0.402183] rtc_cmos 00:01: rtc core: registered rtc_cmos as
>> rtc0
>> >>> >>> [ 0.402875] rtc0: alarms up to one day, 114 bytes nvram, hpet
>> irqs
>> >>> >>> [ 0.403594] device-mapper: uevent: version 1.0.3
>> >>> >>> [ 0.404188] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
>> >>> >>> initialised: dm-devel@xxxxxxxxxx
>> >>> >>> [ 0.405131] cpuidle: using governor ladder
>> >>> >>> [ 0.405608] cpuidle: using governor menu
>> >>> >>> [ 0.406083] EFI Variables Facility v0.08 2004-May-17
>> >>> >>> [ 0.406733] TCP cubic registered
>> >>> >>> [ 0.407238] NET: Registered protocol family 10
>> >>> >>> [ 0.408067] NET: Registered protocol family 17
>> >>> >>> [ 0.408585] Registering the dns_resolver key type
>> >>> >>> [ 0.409217] registered taskstats version 1
>> >>> >>> [ 0.409861] input: AT Translated Set 2 keyboard as
>> >>> >>> /devices/platform/i8042/serio0/input/input1
>> >>> >>> [ 0.413008] Magic number: 1:528:382
>> >>> >>> [ 0.413527] rtc_cmos 00:01: setting system clock to 2013-02-18
>> >>> >>> 13:23:57 UTC (1361193837)
>> >>> >>> [ 0.414461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices
>> found
>> >>> >>> [ 0.415109] EDD information not available.
>> >>> >>> [ 0.564916] Freeing unused kernel memory: 900k freed
>> >>> >>> [ 0.566068] Write protecting the kernel read-only data: 12288k
>> >>> >>> [ 0.574550] Freeing unused kernel memory: 1968k freed
>> >>> >>> [ 0.579346] Freeing unused kernel memory: 1368k freed
>> >>> >>>
>> >>> >>> info: initramfs: up at 0.58
>> >>> >>> NOCHANGE: partition 1 is size 64260. it cannot be grown
>> >>> >>> info: initramfs loading root from /dev/vda1
>> >>> >>> info: /etc/init.d/rc.sysinit: up at 0.75
>> >>> >>> [ 0.754862] EXT3-fs (vda1): warning: checktime reached, running
>> >>> >>> e2fsck is recommended
>> >>> >>> Starting logging: OK
>> >>> >>> Initializing random number generator... done.
>> >>> >>> Starting network...
>> >>> >>> udhcpc (v1.18.5) started
>> >>> >>> Sending discover...
>> >>> >>> Sending select for 10.5.5.5...
>> >>> >>> Lease of 10.5.5.5 obtained, lease time 120
>> >>> >>> deleting routers
>> >>> >>> route: SIOCDELRT: No such process
>> >>> >>> adding dns 8.8.8.8
>> >>> >>> cloud-setup: checking
>> >>> >>> http://169.254.169.254/2009-04-04/meta-data/instance-id
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Connection
>> >>> >>> timed out
>> >>> >>> cloud-setup: failed 1/30: up 0.85. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Connection
>> >>> >>> timed out
>> >>> >>> cloud-setup: failed 2/30: up 191.17. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Connection
>> >>> >>> timed out
>> >>> >>> cloud-setup: failed 3/30: up 381.64. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Connection
>> >>> >>> timed out
>> >>> >>> cloud-setup: failed 4/30: up 572.10. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Connection
>> >>> >>> timed out
>> >>> >>> cloud-setup: failed 5/30: up 762.57. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Connection
>> >>> >>> timed out
>> >>> >>> cloud-setup: failed 6/30: up 953.03. request failed
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>> Then again I created another compute node and spawned another VM
>> on
>> >>> >>> there and it wont hang and lets me log in. But does not get an
>> ip. Its log
>> >>> >>> is as follows.
>> >>> >>>
>> >>> >>>
>> >>> >>> [ 0.000000] Initializing cgroup subsys cpuset
>> >>> >>> [ 0.000000] Initializing cgroup subsys cpu
>> >>> >>> [ 0.000000] Linux version 3.0.0-12-virtual (buildd@crested)
>> (gcc
>> >>> >>> version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri
>> Oct 7
>> >>> >>> 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
>> >>> >>> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
>> >>> >>> console=ttyS0 console=hvc0
>> >>> >>> [ 0.000000] KERNEL supported cpus:
>> >>> >>> [ 0.000000] Intel GenuineIntel
>> >>> >>> [ 0.000000] AMD AuthenticAMD
>> >>> >>> [ 0.000000] Centaur CentaurHauls
>> >>> >>> [ 0.000000] BIOS-provided physical RAM map:
>> >>> >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00
>> >>> >>> (usable)
>> >>> >>> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000
>> >>> >>> (usable)
>> >>> >>> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
>> >>> >>> (reserved)
>> >>> >>> [ 0.000000] NX (Execute Disable) protection: active
>> >>> >>> [ 0.000000] DMI 2.4 present.
>> >>> >>> [ 0.000000] No AGP bridge found
>> >>> >>> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
>> >>> >>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new
>> >>> >>> 0x7010600070106
>> >>> >>> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
>> >>> >>> [ 0.000000] init_memory_mapping:
>> 0000000000000000-000000001fffd000
>> >>> >>> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
>> >>> >>> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
>> >>> >>> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS
>> BXPCRSDT
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS
>> BXPCFACP
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC
>> BXDSDT
>> >>> >>> 00000001 INTL 20100528)
>> >>> >>> [ 0.000000] ACPI: FACS 000000001fffff40 00040
>> >>> >>> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS
>> BXPCSSDT
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS
>> BXPCAPIC
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS
>> BXPCHPET
>> >>> >>> 00000001 BXPC 00000001)
>> >>> >>> [ 0.000000] No NUMA configuration found
>> >>> >>> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
>> >>> >>> [ 0.000000] Initmem setup node 0
>> 0000000000000000-000000001fffd000
>> >>> >>> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
>> >>> >>> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
>> >>> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
>> >>> >>> [ 0.000000] Zone PFN ranges:
>> >>> >>> [ 0.000000] DMA 0x00000010 -> 0x00001000
>> >>> >>> [ 0.000000] DMA32 0x00001000 -> 0x00100000
>> >>> >>> [ 0.000000] Normal empty
>> >>> >>> [ 0.000000] Movable zone start PFN for each node
>> >>> >>> [ 0.000000] early_node_map[2] active PFN ranges
>> >>> >>> [ 0.000000] 0: 0x00000010 -> 0x0000009d
>> >>> >>> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
>> >>> >>> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
>> >>> >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> >>> >>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000]
>> >>> >>> gsi_base[0])
>> >>> >>> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address
>> 0xfec00000,
>> >>> >>> GSI 0-23
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
>> >>> >>> dfl)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11
>> high
>> >>> >>> level)
>> >>> >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> >>> >>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> >>> >>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 000000000009d000 -
>> >>> >>> 000000000009e000
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
>> >>> >>> 00000000000a0000
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
>> >>> >>> 00000000000f0000
>> >>> >>> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
>> >>> >>> 0000000000100000
>> >>> >>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
>> >>> >>> 20000000:deffc000)
>> >>> >>> [ 0.000000] Booting paravirtualized kernel on KVM
>> >>> >>> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
>> >>> >>> nr_cpu_ids:1 nr_node_ids:1
>> >>> >>> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000
>> s79296
>> >>> >>> r8192 d23104 u2097152
>> >>> >>> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
>> >>> >>> [ 0.000000] KVM setup async PF for cpu 0
>> >>> >>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
>> on.
>> >>> >>> Total pages: 129157
>> >>> >>> [ 0.000000] Policy zone: DMA32
>> >>> >>> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro
>> >>> >>> console=tty0 console=ttyS0 console=hvc0
>> >>> >>> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384
>> bytes)
>> >>> >>> [ 0.000000] Checking aperture...
>> >>> >>> [ 0.000000] No AGP bridge found
>> >>> >>> [ 0.000000] Memory: 497852k/524276k available (6206k kernel
>> code,
>> >>> >>> 460k absent, 25964k reserved, 6907k data, 900k init)
>> >>> >>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3,
>> >>> >>> MinObjects=0, CPUs=1, Nodes=1
>> >>> >>> [ 0.000000] Hierarchical RCU implementation.
>> >>> >>> [ 0.000000] RCU dyntick-idle grace-period acceleration is
>> >>> >>> enabled.
>> >>> >>> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
>> >>> >>> [ 0.000000] Console: colour VGA+ 80x25
>> >>> >>> [ 0.000000] console [tty0] enabled
>> >>> >>> [ 0.000000] console [ttyS0] enabled
>> >>> >>> [ 0.000000] allocated 4194304 bytes of page_cgroup
>> >>> >>> [ 0.000000] please try 'cgroup_disable=memory' option if you
>> don't
>> >>> >>> want memory cgroups
>> >>> >>> [ 0.000000] Detected 2388.000 MHz processor.
>> >>> >>> [ 0.008000] Calibrating delay loop (skipped) preset value..
>> >>> >>> 4776.00 BogoMIPS (lpj=9552000)
>> >>> >>> [ 0.008000] pid_max: default: 32768 minimum: 301
>> >>> >>> [ 0.008060] Security Framework initialized
>> >>> >>> [ 0.009366] AppArmor: AppArmor initialized
>> >>> >>> [ 0.012006] Yama: becoming mindful.
>> >>> >>> [ 0.013281] Dentry cache hash table entries: 65536 (order: 7,
>> >>> >>> 524288 bytes)
>> >>> >>> [ 0.016066] Inode-cache hash table entries: 32768 (order: 6,
>> >>> >>> 262144 bytes)
>> >>> >>> [ 0.018349] Mount-cache hash table entries: 256
>> >>> >>> [ 0.020129] Initializing cgroup subsys cpuacct
>> >>> >>> [ 0.021491] Initializing cgroup subsys memory
>> >>> >>> [ 0.022851] Initializing cgroup subsys devices
>> >>> >>> [ 0.024016] Initializing cgroup subsys freezer
>> >>> >>> [ 0.025363] Initializing cgroup subsys net_cls
>> >>> >>> [ 0.026715] Initializing cgroup subsys blkio
>> >>> >>> [ 0.028030] Initializing cgroup subsys perf_event
>> >>> >>> [ 0.029573] mce: CPU supports 10 MCE banks
>> >>> >>> [ 0.031197] SMP alternatives: switching to UP code
>> >>> >>> [ 0.147933] Freeing SMP alternatives: 24k freed
>> >>> >>> [ 0.148079] ACPI: Core revision 20110413
>> >>> >>> [ 0.150559] ftrace: allocating 26075 entries in 103 pages
>> >>> >>> [ 0.157762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1
>> pin2=-1
>> >>> >>> [ 0.159467] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @
>> 2.40GHz
>> >>> >>> stepping 0b
>> >>> >>> [ 0.164009] Performance Events: unsupported p6 CPU model 15 no
>> PMU
>> >>> >>> driver, software events only.
>> >>> >>> [ 0.164009] Brought up 1 CPUs
>> >>> >>> [ 0.164014] Total of 1 processors activated (4776.00 BogoMIPS).
>> >>> >>> [ 0.166755] devtmpfs: initialized
>> >>> >>> [ 0.170360] print_constraints: dummy:
>> >>> >>> [ 0.172104] Time: 13:24:44 Date: 02/18/13
>> >>> >>> [ 0.173418] NET: Registered protocol family 16
>> >>> >>> [ 0.174937] ACPI: bus type pci registered
>> >>> >>> [ 0.176142] PCI: Using configuration type 1 for base access
>> >>> >>> [ 0.178569] bio: create slab <bio-0> at 0
>> >>> >>> [ 0.182563] ACPI: Interpreter enabled
>> >>> >>> [ 0.184015] ACPI: (supports S0 S3 S4 S5)
>> >>> >>> [ 0.185710] ACPI: Using IOAPIC for interrupt routing
>> >>> >>> [ 0.191250] ACPI: No dock devices found.
>> >>> >>> [ 0.192014] HEST: Table not found.
>> >>> >>> [ 0.193107] PCI: Ignoring host bridge windows from ACPI; if
>> >>> >>> necessary, use "pci=use_crs" and report a bug
>> >>> >>> [ 0.196032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus
>> 00-ff])
>> >>> >>> [ 0.201426] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f]
>> claimed
>> >>> >>> by PIIX4 ACPI
>> >>> >>> [ 0.203612] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f]
>> claimed
>> >>> >>> by PIIX4 SMB
>> >>> >>> [ 0.222828] pci0000:00: Unable to request _OSC control (_OSC
>> >>> >>> support mask: 0x1e)
>> >>> >>> [ 0.230916] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>> >>> >>> [ 0.233519] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>> >>> >>> [ 0.236105] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>> >>> >>> [ 0.238340] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>> >>> >>> [ 0.240838] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
>> >>> >>> [ 0.243162] vgaarb: device added:
>> >>> >>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> >>> >>> [ 0.244018] vgaarb: loaded
>> >>> >>> [ 0.244970] vgaarb: bridge control possible 0000:00:02.0
>> >>> >>> [ 0.248376] SCSI subsystem initialized
>> >>> >>> [ 0.249892] usbcore: registered new interface driver usbfs
>> >>> >>> [ 0.251464] usbcore: registered new interface driver hub
>> >>> >>> [ 0.252071] usbcore: registered new device driver usb
>> >>> >>> [ 0.253742] PCI: Using ACPI for IRQ routing
>> >>> >>> [ 0.256479] NetLabel: Initializing
>> >>> >>> [ 0.257580] NetLabel: domain hash size = 128
>> >>> >>> [ 0.258875] NetLabel: protocols = UNLABELED CIPSOv4
>> >>> >>> [ 0.260035] NetLabel: unlabeled traffic allowed by default
>> >>> >>> [ 0.261665] HPET: 3 timers in total, 0 timers will be used for
>> >>> >>> per-cpu timer
>> >>> >>> [ 0.264019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> >>> >>> [ 0.265888] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
>> >>> >>> [ 0.272194] Switching to clocksource kvm-clock
>> >>> >>> [ 0.274531] Switched to NOHz mode on CPU #0
>> >>> >>> [ 0.285035] AppArmor: AppArmor Filesystem Enabled
>> >>> >>> [ 0.286499] pnp: PnP ACPI init
>> >>> >>> [ 0.287542] ACPI: bus type pnp registered
>> >>> >>> [ 0.289770] pnp: PnP ACPI: found 8 devices
>> >>> >>> [ 0.291018] ACPI: ACPI bus type pnp unregistered
>> >>> >>> [ 0.298943] NET: Registered protocol family 2
>> >>> >>> [ 0.300379] IP route cache hash table entries: 4096 (order: 3,
>> >>> >>> 32768 bytes)
>> >>> >>> [ 0.302578] TCP established hash table entries: 16384 (order:
>> 6,
>> >>> >>> 262144 bytes)
>> >>> >>> [ 0.305173] TCP bind hash table entries: 16384 (order: 6,
>> 262144
>> >>> >>> bytes)
>> >>> >>> [ 0.307360] TCP: Hash tables configured (established 16384 bind
>> >>> >>> 16384)
>> >>> >>> [ 0.309146] TCP reno registered
>> >>> >>> [ 0.310196] UDP hash table entries: 256 (order: 1, 8192 bytes)
>> >>> >>> [ 0.311822] UDP-Lite hash table entries: 256 (order: 1, 8192
>> >>> >>> bytes)
>> >>> >>> [ 0.313682] NET: Registered protocol family 1
>> >>> >>> [ 0.315006] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>> >>> >>> [ 0.316674] pci 0000:00:01.0: PIIX3: Enabling Passive Release
>> >>> >>> [ 0.318307] pci 0000:00:01.0: Activating ISA DMA hang
>> workarounds
>> >>> >>> [ 0.320480] audit: initializing netlink socket (disabled)
>> >>> >>> [ 0.322019] type=2000 audit(1361193885.316:1): initialized
>> >>> >>> [ 0.344239] Trying to unpack rootfs image as initramfs...
>> >>> >>> [ 0.358871] HugeTLB registered 2 MB page size, pre-allocated 0
>> >>> >>> pages
>> >>> >>> [ 0.365890] VFS: Disk quotas dquot_6.5.2
>> >>> >>> [ 0.367186] Dquot-cache hash table entries: 512 (order 0, 4096
>> >>> >>> bytes)
>> >>> >>> [ 0.376084] fuse init (API version 7.16)
>> >>> >>> [ 0.377439] msgmni has been set to 972
>> >>> >>> [ 0.392139] Block layer SCSI generic (bsg) driver version 0.4
>> >>> >>> loaded (major 253)
>> >>> >>> [ 0.394429] io scheduler noop registered
>> >>> >>> [ 0.395634] io scheduler deadline registered (default)
>> >>> >>> [ 0.397194] io scheduler cfq registered
>> >>> >>> [ 0.399476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> >>> >>> [ 0.401085] pciehp: PCI Express Hot Plug Controller Driver
>> >>> >>> version: 0.4
>> >>> >>> [ 0.402998] input: Power Button as
>> >>> >>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>> >>> >>> [ 0.405233] ACPI: Power Button [PWRF]
>> >>> >>> [ 0.417377] ERST: Table is not found!
>> >>> >>> [ 0.418791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>> >>> >>> [ 0.420438] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] ->
>> >>> >>> GSI 11 (level, high) -> IRQ 11
>> >>> >>> [ 0.432170] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>> >>> >>> [ 0.433814] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] ->
>> >>> >>> GSI 10 (level, high) -> IRQ 10
>> >>> >>> [ 0.438359] Freeing initrd memory: 2000k freed
>> >>> >>> [ 0.441355] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>> >>> >>> [ 0.443792] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] ->
>> >>> >>> GSI 10 (level, high) -> IRQ 10
>> >>> >>> [ 0.447889] Serial: 8250/16550 driver, 32 ports, IRQ sharing
>> >>> >>> enabled
>> >>> >>> [ 0.472678] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a
>> 16550A
>> >>> >>> [ 0.496702] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a
>> 16550A
>> >>> >>> [ 0.521704] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> >>> >>> [ 0.545496] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> >>> >>> [ 0.547267] Linux agpgart interface v0.103
>> >>> >>> [ 0.549897] brd: module loaded
>> >>> >>> [ 0.551553] loop: module loaded
>> >>> >>> [ 0.554797] vda: vda1
>> >>> >>> [ 0.556875] scsi0 : ata_piix
>> >>> >>> [ 0.558025] scsi1 : ata_piix
>> >>> >>> [ 0.559060] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma
>> 0xc0a0
>> >>> >>> irq 14
>> >>> >>> [ 0.560911] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma
>> 0xc0a8
>> >>> >>> irq 15
>> >>> >>> [ 0.563676] Fixed MDIO Bus: probed
>> >>> >>> [ 0.565407] PPP generic driver version 2.4.2
>> >>> >>> [ 0.567404] tun: Universal TUN/TAP device driver, 1.6
>> >>> >>> [ 0.569609] tun: (C) 1999-2004 Max Krasnyansky <
>> maxk@xxxxxxxxxxxx>
>> >>> >>> [ 0.606807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>> >>> >>> Driver
>> >>> >>> [ 0.609530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
>> Driver
>> >>> >>> [ 0.612116] uhci_hcd: USB Universal Host Controller Interface
>> >>> >>> driver
>> >>> >>> [ 0.614760] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] ->
>> GSI
>> >>> >>> 10 (level, high) -> IRQ 10
>> >>> >>> [ 0.618308] uhci_hcd 0000:00:01.2: UHCI Host Controller
>> >>> >>> [ 0.619885] uhci_hcd 0000:00:01.2: new USB bus registered,
>> >>> >>> assigned bus number 1
>> >>> >>> [ 0.622297] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
>> >>> >>> [ 0.624142] hub 1-0:1.0: USB hub found
>> >>> >>> [ 0.625358] hub 1-0:1.0: 2 ports detected
>> >>> >>> [ 0.626777] i8042: PNP: PS/2 Controller
>> [PNP0303:KBD,PNP0f13:MOU]
>> >>> >>> at 0x60,0x64 irq 1,12
>> >>> >>> [ 0.630038] serio: i8042 KBD port at 0x60,0x64 irq 1
>> >>> >>> [ 0.631498] serio: i8042 AUX port at 0x60,0x64 irq 12
>> >>> >>> [ 0.633058] mousedev: PS/2 mouse device common for all mice
>> >>> >>> [ 0.634804] rtc_cmos 00:01: RTC can wake from S4
>> >>> >>> [ 0.636473] rtc_cmos 00:01: rtc core: registered rtc_cmos as
>> rtc0
>> >>> >>> [ 0.638306] rtc0: alarms up to one day, 114 bytes nvram, hpet
>> irqs
>> >>> >>> [ 0.640167] device-mapper: uevent: version 1.0.3
>> >>> >>> [ 0.641633] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
>> >>> >>> initialised: dm-devel@xxxxxxxxxx
>> >>> >>> [ 0.644149] cpuidle: using governor ladder
>> >>> >>> [ 0.645427] cpuidle: using governor menu
>> >>> >>> [ 0.646682] EFI Variables Facility v0.08 2004-May-17
>> >>> >>> [ 0.648412] TCP cubic registered
>> >>> >>> [ 0.649633] NET: Registered protocol family 10
>> >>> >>> [ 0.651585] NET: Registered protocol family 17
>> >>> >>> [ 0.652979] Registering the dns_resolver key type
>> >>> >>> [ 0.654619] registered taskstats version 1
>> >>> >>> [ 0.656246] input: AT Translated Set 2 keyboard as
>> >>> >>> /devices/platform/i8042/serio0/input/input1
>> >>> >>> [ 0.671472] Magic number: 1:81:433
>> >>> >>> [ 0.672837] rtc_cmos 00:01: setting system clock to 2013-02-18
>> >>> >>> 13:24:45 UTC (1361193885)
>> >>> >>> [ 0.675260] BIOS EDD facility v0.16 2004-Jun-25, 0 devices
>> found
>> >>> >>> [ 0.676968] EDD information not available.
>> >>> >>> [ 0.814934] Freeing unused kernel memory: 900k freed
>> >>> >>> [ 0.817578] Write protecting the kernel read-only data: 12288k
>> >>> >>> [ 0.827394] Freeing unused kernel memory: 1968k freed
>> >>> >>> [ 0.834295] Freeing unused kernel memory: 1368k freed
>> >>> >>>
>> >>> >>> info: initramfs: up at 0.85
>> >>> >>> NOCHANGE: partition 1 is size 64260. it cannot be grown
>> >>> >>> info: initramfs loading root from /dev/vda1
>> >>> >>> info: /etc/init.d/rc.sysinit: up at 1.09
>> >>> >>> [ 1.100339] EXT3-fs (vda1): warning: checktime reached, running
>> >>> >>> e2fsck is recommended
>> >>> >>> Starting logging: OK
>> >>> >>> Initializing random number generator... done.
>> >>> >>> Starting network...
>> >>> >>> udhcpc (v1.18.5) started
>> >>> >>> Sending discover...
>> >>> >>> Sending discover...
>> >>> >>> Sending discover...
>> >>> >>> No lease, failing
>> >>> >>> WARN: /etc/rc3.d/S40-network failed
>> >>> >>> cloud-setup: checking
>> >>> >>> http://169.254.169.254/2009-04-04/meta-data/instance-id
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 1/30: up 10.43. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 2/30: up 11.45. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 3/30: up 12.47. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 4/30: up 13.48. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 5/30: up 14.49. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 6/30: up 15.51. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 7/30: up 16.52. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 8/30: up 17.54. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 9/30: up 18.55. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 10/30: up 19.57. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 11/30: up 20.58. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 12/30: up 21.60. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 13/30: up 22.61. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 14/30: up 23.62. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 15/30: up 24.64. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 16/30: up 25.65. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 17/30: up 26.66. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 18/30: up 27.68. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 19/30: up 28.69. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 20/30: up 29.71. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 21/30: up 30.72. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 22/30: up 31.73. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 23/30: up 32.75. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 24/30: up 33.76. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 25/30: up 34.77. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 26/30: up 35.78. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 27/30: up 36.82. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 28/30: up 37.83. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 29/30: up 38.85. request failed
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-setup: failed 30/30: up 39.86. request failed
>> >>> >>> cloud-setup: after 30 fails, debugging
>> >>> >>> cloud-setup: running debug (30 tries reached)
>> >>> >>> ############ debug start ##############
>> >>> >>> ### /etc/rc.d/init.d/sshd start
>> >>> >>> /etc/rc3.d/S45-cloud-setup: line 66: /etc/rc.d/init.d/sshd: not
>> found
>> >>> >>> route: fscanf
>> >>> >>> ### ifconfig -a
>> >>> >>> eth0 Link encap:Ethernet HWaddr FA:16:3E:4B:FE:5F
>> >>> >>> inet6 addr: fe80::f816:3eff:fe4b:fe5f/64 Scope:Link
>> >>> >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> >>> >>> RX packets:13 errors:0 dropped:0 overruns:0 frame:0
>> >>> >>> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>> >>> >>> collisions:0 txqueuelen:1000
>> >>> >>> RX bytes:1706 (1.6 KiB) TX bytes:1224 (1.1 KiB)
>> >>> >>>
>> >>> >>> lo Link encap:Local Loopback
>> >>> >>> inet addr:127.0.0.1 Mask:255.0.0.0
>> >>> >>> inet6 addr: ::1/128 Scope:Host
>> >>> >>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>> >>> >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>> >>> >>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>> >>> >>> collisions:0 txqueuelen:0
>> >>> >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>> >>> >>>
>> >>> >>> ### route -n
>> >>> >>> Kernel IP routing table
>> >>> >>> Destination Gateway Genmask Flags Metric Ref
>> >>> >>> Use Iface
>> >>> >>> route: fscanf
>> >>> >>> ### cat /etc/resolv.conf
>> >>> >>> cat: can't open '/etc/resolv.conf': No such file or directory
>> >>> >>> ### gateway not found
>> >>> >>> /etc/rc3.d/S45-cloud-setup: line 66: can't open /etc/resolv.conf:
>> no
>> >>> >>> such file
>> >>> >>> ### pinging nameservers
>> >>> >>> ### uname -a
>> >>> >>> Linux cirros 3.0.0-12-virtual #20-Ubuntu SMP Fri Oct 7 18:19:02
>> UTC
>> >>> >>> 2011 x86_64 GNU/Linux
>> >>> >>> ### lsmod
>> >>> >>> Module Size Used by Not tainted
>> >>> >>> vfat 17585 0
>> >>> >>> fat 61475 1 vfat
>> >>> >>> isofs 40253 0
>> >>> >>> ip_tables 27473 0
>> >>> >>> x_tables 29846 1 ip_tables
>> >>> >>> pcnet32 42078 0
>> >>> >>> 8139cp 27412 0
>> >>> >>> ne2k_pci 13691 0
>> >>> >>> 8390 18856 1 ne2k_pci
>> >>> >>> e1000 108573 0
>> >>> >>> acpiphp 24080 0
>> >>> >>> ### dmesg | tail
>> >>> >>> [ 1.214878] acpiphp: Slot [30] registered
>> >>> >>> [ 1.214899] acpiphp: Slot [31] registered
>> >>> >>> [ 1.228073] e1000: Intel(R) PRO/1000 Network Driver - version
>> >>> >>> 7.3.21-k8-NAPI
>> >>> >>> [ 1.228076] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> >>> >>> [ 1.236351] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>> >>> >>> [ 1.242803] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3
>> (Mar
>> >>> >>> 22, 2004)
>> >>> >>> [ 1.250444] pcnet32: pcnet32.c:v1.35 21.Apr.2008
>> >>> >>> tsbogend@xxxxxxxxxxxxxxxx
>> >>> >>> [ 1.260202] ip_tables: (C) 2000-2006 Netfilter Core Team
>> >>> >>> [ 1.344253] Refined TSC clocksource calibration: 2387.967 MHz.
>> >>> >>> [ 2.108346] eth0: IPv6 duplicate address
>> fe80::f816:3eff:fe4b:fe5f
>> >>> >>> detected!
>> >>> >>> ### tail -n 25 /var/log/messages
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.948101] usb 1-1:
>> new
>> >>> >>> full speed USB device number 2 using uhci_hcd
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.971567] EXT3-fs:
>> >>> >>> barriers not enabled
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.971818] kjournald
>> >>> >>> starting. Commit interval 5 seconds
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 0.971836] EXT3-fs
>> >>> >>> (vda1): mounted filesystem with ordered data mode
>> >>> >>> Feb 18 06:24:46 cirros kern.warn kernel: [ 1.100339] EXT3-fs
>> >>> >>> (vda1): warning: checktime reached, running e2fsck is recommended
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.103064] EXT3-fs
>> >>> >>> (vda1): using internal journal
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.213929] acpiphp:
>> ACPI
>> >>> >>> Hot Plug PCI Controller Driver version: 0.5
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214172] acpiphp:
>> Slot
>> >>> >>> [1] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214207] acpiphp:
>> Slot
>> >>> >>> [2] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214228] acpiphp:
>> Slot
>> >>> >>> [3] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214249] acpiphp:
>> Slot
>> >>> >>> [4] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214289] acpiphp:
>> Slot
>> >>> >>> [5] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214312] acpiphp:
>> Slot
>> >>> >>> [6] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214335] acpiphp:
>> Slot
>> >>> >>> [7] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214358] acpiphp:
>> Slot
>> >>> >>> [8] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214380] acpiphp:
>> Slot
>> >>> >>> [9] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.214403] acpiphp:
>> Slot
>> >>> >>> [10] registered
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.228073] e1000:
>> >>> >>> Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.228076] e1000:
>> >>> >>> Copyright (c) 1999-2006 Intel Corporation.
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.236351]
>> >>> >>> ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.242803] 8139cp:
>> >>> >>> 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.250444] pcnet32:
>> >>> >>> pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.260202]
>> ip_tables:
>> >>> >>> (C) 2000-2006 Netfilter Core Team
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 1.344253] Refined
>> TSC
>> >>> >>> clocksource calibration: 2387.967 MHz.
>> >>> >>> Feb 18 06:24:46 cirros kern.info kernel: [ 2.108346] eth0:
>> IPv6
>> >>> >>> duplicate address fe80::f816:3eff:fe4b:fe5f detected!
>> >>> >>> ############ debug end ##############
>> >>> >>> cloud-setup: failed to read iid from metadata. tried 30
>> >>> >>> WARN: /etc/rc3.d/S45-cloud-setup failed
>> >>> >>> Starting dropbear sshd: generating rsa key... generating dsa
>> key...
>> >>> >>> OK
>> >>> >>> ===== cloud-final: system completely up in 41.37 seconds ====
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> instance-id:
>> >>> >>> public-ipv4:
>> >>> >>> local-ipv4 :
>> >>> >>> wget: can't connect to remote host (169.254.169.254): Network is
>> >>> >>> unreachable
>> >>> >>> cloud-userdata: failed to read instance id
>> >>> >>> WARN: /etc/rc3.d/S99-cloud-userdata failed
>> >>> >>> ____ ____ ____
>> >>> >>> / __/ __ ____ ____ / __ \/ __/
>> >>> >>> / /__ / // __// __// /_/ /\ \
>> >>> >>> \___//_//_/ /_/ \____/___/
>> >>> >>> http://launchpad.net/cirros
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>> login as 'cirros' user. default password: 'cubswin:)'. use 'sudo'
>> for
>> >>> >>> root.
>> >>> >>>
>> >>> >>> cirros login:
>> >>> >>>
>> >>> >>>
>> >>> >>> Additionally when I try to create more than 5 instances it throws
>> the
>> >>> >>> following exception.
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>> Error: Quota exceeded for instances: Requested 1, but already
>> used 10
>> >>> >>> of 10 instances (HTTP 413) (Request-ID:
>> >>> >>> req-09f00a85-900b-4f11-94fe-e7f8e4311032)
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>> Thanks.
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>> On 18 February 2013 13:30, Chathura M. Sarathchandra Magurawalage
>> >>> >>> <77.chathura@xxxxxxxxx> wrote:
>> >>> >>>>
>> >>> >>>> Yes definitely I will post it here for future reference for
>> anybody.
>> >>> >>>>
>> >>> >>>> On 18 February 2013 13:28, Guilherme Russi
>> >>> >>>> <luisguilherme.cr@xxxxxxxxx> wrote:
>> >>> >>>>>
>> >>> >>>>> Got it, I have one virtual interface too, to make the management
>> >>> >>>>> and VM conf part. If you find anything, let me know, please.
>> >>> >>>>>
>> >>> >>>>> Thanks.
>> >>> >>>>>
>> >>> >>>>>
>> >>> >>>>>
>> >>> >>>>> 2013/2/18 Chathura M. Sarathchandra Magurawalage
>> >>> >>>>> <77.chathura@xxxxxxxxx>
>> >>> >>>>>>
>> >>> >>>>>> I have only got 1 NIC but got two virtual interface for two
>> >>> >>>>>> different networks. I have got network node in the same
>> physical machine
>> >>> >>>>>> too.
>> >>> >>>>>>
>> >>> >>>>>>
>> >>> >>>>>> On 18 February 2013 13:15, Guilherme Russi
>> >>> >>>>>> <luisguilherme.cr@xxxxxxxxx> wrote:
>> >>> >>>>>>>
>> >>> >>>>>>> How did you install your controller node? I mean, mine I have
>> 2
>> >>> >>>>>>> NICs and I installed the network node at the same physical
>> machine.
>> >>> >>>>>>>
>> >>> >>>>>>>
>> >>> >>>>>>> 2013/2/18 Chathura M. Sarathchandra Magurawalage
>> >>> >>>>>>> <77.chathura@xxxxxxxxx>
>> >>> >>>>>>>
>> >>> >>>>>>>> Hello Guilherme,
>> >>> >>>>>>>>
>> >>> >>>>>>>> No, I am still having the problem :(
>> >>> >>>>>>>>
>> >>> >>>>>>>>
>> >>> >>>>>>>> On 18 February 2013 13:01, Guilherme Russi
>> >>> >>>>>>>> <luisguilherme.cr@xxxxxxxxx> wrote:
>> >>> >>>>>>>>>
>> >>> >>>>>>>>> Hello Chathura,
>> >>> >>>>>>>>>
>> >>> >>>>>>>>> Have succeeded with your network? I'm having problems with
>> >>> >>>>>>>>> mine too.
>> >>> >>>>>>>>>
>> >>> >>>>>>>>> Thanks.
>> >>> >>>>>>>>>
>> >>> >>>>>>>>> Guilherme.
>> >>> >>>>>>>>>
>> >>> >>>>>>>>>
>> >>> >>>>>>>>> 2013/2/17 Chathura M. Sarathchandra Magurawalage
>> >>> >>>>>>>>> <77.chathura@xxxxxxxxx>
>> >>> >>>>>>>>>
>> >>> >>>>>>>>>> Hope you had a good night sleep :)
>> >>> >>>>>>>>>>
>> >>> >>>>>>>>>> Yes sure I will be on irc. my nickname is chathura77
>> >>> >>>>>>>>>>
>> >>> >>>>>>>>>> Thanks
>> >>> >>>>>>>>>>
>> >>> >>>>>>>>>> On 17 February 2013 13:15, Jean-Baptiste RANSY
>> >>> >>>>>>>>>> <jean-baptiste.ransy@xxxxxxxxxx> wrote:
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> ping
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> Are you on IRC ?
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> JB
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> On 02/17/2013 04:07 AM, Jean-Baptiste RANSY wrote:
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> Add Cirros Image to Glance :)
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> Username: cirros
>> >>> >>>>>>>>>>> Password: cubswin:)
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> to join your VM, it's a bit dirty but you can :
>> >>> >>>>>>>>>>> - put your computer in the same subnet as your controller
>> >>> >>>>>>>>>>> (192.168.2.0/24)
>> >>> >>>>>>>>>>> - then adds a static route to the subnet of your VM. (ip
>> >>> >>>>>>>>>>> route add 10.5.5.0/24 gw 192.168.2.151)
>> >>> >>>>>>>>>>> (192.168.2.151 is the quantum gateway)
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> I'm going to sleep, we will continue tomorrow.
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> JB
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> PS : You also should get some sleep :)
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> On 02/17/2013 03:53 AM, Chathura M. Sarathchandra
>> >>> >>>>>>>>>>> Magurawalage wrote:
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> oh that's weird.
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> I still get this error. couldnt this be because I cannot
>> ping
>> >>> >>>>>>>>>>> the VM in the first place?. Because as far as I know
>> metadata takes care of
>> >>> >>>>>>>>>>> ssh keys. But what if you cant reach the VM in the first
>> place?
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> no instance data found in start-local
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> ci-info: lo : 1 127.0.0.1 255.0.0.0 .
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> ci-info: eth0 : 1 10.5.5.3 255.255.255.0
>> >>> >>>>>>>>>>> fa:16:3e:a7:28:25
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> ci-info: route-0: 0.0.0.0 10.5.5.1 0.0.0.0
>> >>> >>>>>>>>>>> eth0 UG
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> ci-info: route-1: 10.5.5.0 0.0.0.0
>> >>> >>>>>>>>>>> 255.255.255.0 eth0 U
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> cloud-init start running: Sun, 17 Feb 2013 02:45:35
>> +0000. up
>> >>> >>>>>>>>>>> 3.51 seconds
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> 2013-02-17 02:48:25,840 - util.py[WARNING]:
>> >>> >>>>>>>>>>> 'http://169.254.169.254/2009-04-04/meta-data/instance-id'
>> failed [50/120s]:
>> >>> >>>>>>>>>>> url error [timed out]
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> 2013-02-17 02:49:16,893 - util.py[WARNING]:
>> >>> >>>>>>>>>>> 'http://169.254.169.254/2009-04-04/meta-data/instance-id'
>> failed [101/120s]:
>> >>> >>>>>>>>>>> url error [timed out]
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> 2013-02-17 02:49:34,912 - util.py[WARNING]:
>> >>> >>>>>>>>>>> 'http://169.254.169.254/2009-04-04/meta-data/instance-id'
>> failed [119/120s]:
>> >>> >>>>>>>>>>> url error [timed out]
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]:
>> giving
>> >>> >>>>>>>>>>> up on md after 120 seconds
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> no instance data found in start
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> Skipping profile in /etc/apparmor.d/disable:
>> >>> >>>>>>>>>>> usr.sbin.rsyslogd
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> * Starting AppArmor profiles [80G
>> >>> >>>>>>>>>>> [74G[ OK ]
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> On 17 February 2013 02:41, Jean-Baptiste RANSY
>> >>> >>>>>>>>>>> <jean-baptiste.ransy@xxxxxxxxxx> wrote:
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> For me, it's normal that you are not able to curl
>> >>> >>>>>>>>>>>> 169.254.169.254 from your compute and controller nodes :
>> Same thing on my
>> >>> >>>>>>>>>>>> side, but my VM get their metadata.
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Try to lunch an instance.
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> JB
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> On 02/17/2013 03:35 AM, Chathura M. Sarathchandra
>> >>> >>>>>>>>>>>> Magurawalage wrote:
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> root@computernode:~# curl -v http://169.254.169.254
>> >>> >>>>>>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
>> >>> >>>>>>>>>>>> * Trying 169.254.169.254...
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> root@controller:~# curl -v http://169.254.169.254
>> >>> >>>>>>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
>> >>> >>>>>>>>>>>> * Trying 169.254.169.254...
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> root@athena:~# iptables -L -n -v
>> >>> >>>>>>>>>>>> Chain INPUT (policy ACCEPT 59009 packets, 22M bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 59493 22M quantum-l3-agent-INPUT all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 59493 22M nova-api-INPUT all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 484 73533 ACCEPT 47 -- * * 0.0.0.0/0
>> >>> >>>>>>>>>>>> 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain FORWARD (policy ACCEPT 707 packets, 47819 bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 707 47819 quantum-filter-top all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 707 47819 quantum-l3-agent-FORWARD all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 707 47819 nova-filter-top all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 707 47819 nova-api-FORWARD all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain OUTPUT (policy ACCEPT 56022 packets, 22M bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 56022 22M quantum-filter-top all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 56022 22M quantum-l3-agent-OUTPUT all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 56022 22M nova-filter-top all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 56022 22M nova-api-OUTPUT all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-FORWARD (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-INPUT (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 ACCEPT tcp -- * * 0.0.0.0/0
>> >>> >>>>>>>>>>>> 192.168.2.225 tcp dpt:8775
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-OUTPUT (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-local (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-filter-top (2 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 56729 22M nova-api-local all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-filter-top (2 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 56729 22M quantum-l3-agent-local all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-FORWARD (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-INPUT (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 ACCEPT tcp -- * * 0.0.0.0/0
>> >>> >>>>>>>>>>>> 192.168.2.225 tcp dpt:8775
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-OUTPUT (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-local (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> root@athena:~# iptables -L -n -v -t nat
>> >>> >>>>>>>>>>>> Chain PREROUTING (policy ACCEPT 3212 packets, 347K bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 3212 347K quantum-l3-agent-PREROUTING all -- *
>> *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 3212 347K nova-api-PREROUTING all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain INPUT (policy ACCEPT 639 packets, 84948 bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain OUTPUT (policy ACCEPT 3180 packets, 213K bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 3180 213K quantum-l3-agent-OUTPUT all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 3180 213K nova-api-OUTPUT all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 3726 247K quantum-l3-agent-POSTROUTING all -- *
>> *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 0 0 nova-api-POSTROUTING all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 0 0 quantum-postrouting-bottom all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 0 0 nova-postrouting-bottom all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-OUTPUT (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-POSTROUTING (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-PREROUTING (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-float-snat (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-api-snat (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 nova-api-float-snat all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain nova-postrouting-bottom (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 nova-api-snat all -- * *
>> 0.0.0.0/0
>> >>> >>>>>>>>>>>> 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-OUTPUT (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-POSTROUTING (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 3726 247K ACCEPT all -- !qg-6f8374cb-cb
>> >>> >>>>>>>>>>>> !qg-6f8374cb-cb 0.0.0.0/0 0.0.0.0/0
>> ! ctstate DNAT
>> >>> >>>>>>>>>>>> 0 0 ACCEPT all -- * *
>> 10.5.5.0/24
>> >>> >>>>>>>>>>>> 192.168.2.225
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-PREROUTING (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 DNAT tcp -- * * 0.0.0.0/0
>> >>> >>>>>>>>>>>> 169.254.169.254 tcp dpt:80 to:192.168.2.225:8775
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-float-snat (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-l3-agent-snat (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 quantum-l3-agent-float-snat all -- *
>> *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>> 0 0 SNAT all -- * *
>> 10.5.5.0/24
>> >>> >>>>>>>>>>>> 0.0.0.0/0 to:192.168.2.151
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> Chain quantum-postrouting-bottom (1 references)
>> >>> >>>>>>>>>>>> pkts bytes target prot opt in out source
>> >>> >>>>>>>>>>>> destination
>> >>> >>>>>>>>>>>> 0 0 quantum-l3-agent-snat all -- * *
>> >>> >>>>>>>>>>>> 0.0.0.0/0 0.0.0.0/0
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> thanks.
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>> On 17 February 2013 02:25, Jean-Baptiste RANSY
>> >>> >>>>>>>>>>>> <jean-baptiste.ransy@xxxxxxxxxx> wrote:
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>> Controller node :
>> >>> >>>>>>>>>>>>> # iptables -L -n -v
>> >>> >>>>>>>>>>>>> # iptables -L -n -v -t nat
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>> On 02/17/2013 03:18 AM, Chathura M. Sarathchandra
>> >>> >>>>>>>>>>>>> Magurawalage wrote:
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>> You should be able to curl 169.254.169.254 from compute
>> >>> >>>>>>>>>>>>> node, which I cant at the moment.
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>> I have got the bridge set up in the l3_agent.ini
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>>
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>> _______________________________________________
>> >>> >>>>>>>>>>> Mailing list: https://launchpad.net/~openstack
>> >>> >>>>>>>>>>> Post to : openstack@xxxxxxxxxxxxxxxxxxx
>> >>> >>>>>>>>>>> Unsubscribe : https://launchpad.net/~openstack
>> >>> >>>>>>>>>>> More help : https://help.launchpad.net/ListHelp
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>>
>> >>> >>>>>>>>>>
>> >>> >>>>>>>>>>
>> >>> >>>>>>>>>> _______________________________________________
>> >>> >>>>>>>>>> Mailing list: https://launchpad.net/~openstack
>> >>> >>>>>>>>>> Post to : openstack@xxxxxxxxxxxxxxxxxxx
>> >>> >>>>>>>>>> Unsubscribe : https://launchpad.net/~openstack
>> >>> >>>>>>>>>> More help : https://help.launchpad.net/ListHelp
>> >>> >>>>>>>>>>
>> >>> >>>>>>>>>
>> >>> >>>>>>>>
>> >>> >>>>>>>
>> >>> >>>>>>
>> >>> >>>>>
>> >>> >>>>
>> >>> >>>
>> >>> >>
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> Mailing list: https://launchpad.net/~openstack
>> >>> >> Post to : openstack@xxxxxxxxxxxxxxxxxxx
>> >>> >> Unsubscribe : https://launchpad.net/~openstack
>> >>> >> More help : https://help.launchpad.net/ListHelp
>> >>> >>
>> >>> >
>> >>> > _______________________________________________
>> >>> > Mailing list: https://launchpad.net/~openstack
>> >>> > Post to : openstack@xxxxxxxxxxxxxxxxxxx
>> >>> > Unsubscribe : https://launchpad.net/~openstack
>> >>> > More help : https://help.launchpad.net/ListHelp
>> >>> >
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> Mailing list: https://launchpad.net/~openstack
>> >> Post to : openstack@xxxxxxxxxxxxxxxxxxx
>> >> Unsubscribe : https://launchpad.net/~openstack
>> >> More help : https://help.launchpad.net/ListHelp
>> >>
>> >
>>
>
>
References
-
Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-14
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-16
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-16
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-16
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-16
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-16
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-16
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Jean-Baptiste RANSY, 2013-02-17
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-17
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Richard Whitney, 2013-02-18
-
Re: Cant ping private or floating IP
From: JuanFra Rodriguez Cardoso, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: JuanFra Rodriguez Cardoso, 2013-02-19
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-19
