← Back to team overview

openstack team mailing list archive

Re: Cant ping private or floating IP

 

Hello

Sorry, it comes to the log in prompt but it takes quite long, I just did
not realise.

I have got a running Corros VM. This is the log.


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-12-virtual (buildd@crested) (gcc
version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct
7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
[    0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
console=ttyS0 console=hvc0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
[    0.000000]  BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
[    0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
[    0.000000] RAMDISK: 1fdf9000 - 1ffed000
[    0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS  BXPCRSDT
00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS  BXPCFACP
00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01   BXPC   BXDSDT
00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000001fffff40 00040
[    0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS  BXPCSSDT
00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS  BXPCAPIC
00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS  BXPCHPET
00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000001fffd000
[    0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
[    0.000000]   NODE_DATA [000000001fff5000 - 000000001fff9fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0001fffd
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:deffc000)
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296
r8192 d23104 u2097152
[    0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 129157
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: LABEL=cirros-rootfs ro
console=tty0 console=ttyS0 console=hvc0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 497852k/524276k available (6206k kernel code,
460k absent, 25964k reserved, 6907k data, 900k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[    0.000000] Detected 3392.282 MHz processor.
[    0.008000] Calibrating delay loop (skipped) preset value.. 6784.56
BogoMIPS (lpj=13569128)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] Security Framework initialized
[    0.008000] AppArmor: AppArmor initialized
[    0.008000] Yama: becoming mindful.
[    0.008000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.008292] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009146] Mount-cache hash table entries: 256
[    0.009772] Initializing cgroup subsys cpuacct
[    0.010285] Initializing cgroup subsys memory
[    0.010791] Initializing cgroup subsys devices
[    0.011312] Initializing cgroup subsys freezer
[    0.012004] Initializing cgroup subsys net_cls
[    0.012523] Initializing cgroup subsys blkio
[    0.013027] Initializing cgroup subsys perf_event
[    0.013608] mce: CPU supports 10 MCE banks
[    0.014264] SMP alternatives: switching to UP code
[    0.028279] Freeing SMP alternatives: 24k freed
[    0.028805] ACPI: Core revision 20110413
[    0.029869] ftrace: allocating 26075 entries in 103 pages
[    0.032199] Enabling x2apic
[    0.032576] Enabled x2apic
[    0.036005] Switched APIC routing to physical x2apic.
[    0.037122] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.037755] CPU0: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz stepping 09
[    0.040002] Performance Events: unsupported p6 CPU model 58 no PMU
driver, software events only.
[    0.040002] Brought up 1 CPUs
[    0.040002] Total of 1 processors activated (6784.56 BogoMIPS).
[    0.040002] devtmpfs: initialized
[    0.040252] print_constraints: dummy:
[    0.040734] Time: 12:52:56  Date: 02/20/13
[    0.041230] NET: Registered protocol family 16
[    0.041798] ACPI: bus type pci registered
[    0.042317] PCI: Using configuration type 1 for base access
[    0.043298] bio: create slab <bio-0> at 0
[    0.044935] ACPI: Interpreter enabled
[    0.045378] ACPI: (supports S0 S3 S4 S5)
[    0.046026] ACPI: Using IOAPIC for interrupt routing
[    0.048451] ACPI: No dock devices found.
[    0.048911] HEST: Table not found.
[    0.049321] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[    0.050338] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.052351] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by
PIIX4 ACPI
[    0.053173] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.068180]  pci0000:00: Unable to request _OSC control (_OSC
support mask: 0x1e)
[    0.072782] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.073647] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.074501] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.075362] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.076190] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[    0.077090] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.077982] vgaarb: loaded
[    0.078336] vgaarb: bridge control possible 0000:00:02.0
[    0.079070] SCSI subsystem initialized
[    0.079669] usbcore: registered new interface driver usbfs
[    0.080016] usbcore: registered new interface driver hub
[    0.080613] usbcore: registered new device driver usb
[    0.081265] PCI: Using ACPI for IRQ routing
[    0.081952] NetLabel: Initializing
[    0.082368] NetLabel:  domain hash size = 128
[    0.082869] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.083417] NetLabel:  unlabeled traffic allowed by default
[    0.084051] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.084774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.085480] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.092086] Switching to clocksource kvm-clock
[    0.095414] Switched to NOHz mode on CPU #0
[    0.097611] AppArmor: AppArmor Filesystem Enabled
[    0.098148] pnp: PnP ACPI init
[    0.098557] ACPI: bus type pnp registered
[    0.099474] pnp: PnP ACPI: found 8 devices
[    0.099943] ACPI: ACPI bus type pnp unregistered
[    0.105880] NET: Registered protocol family 2
[    0.106424] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.107293] TCP established hash table entries: 16384 (order: 6,
262144 bytes)
[    0.108257] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.109056] TCP: Hash tables configured (established 16384 bind 16384)
[    0.109725] TCP reno registered
[    0.110113] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.110736] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.111434] NET: Registered protocol family 1
[    0.111938] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.112577] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.113189] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.114074] Trying to unpack rootfs image as initramfs...
[    0.120216] audit: initializing netlink socket (disabled)
[    0.120809] type=2000 audit(1361364777.116:1): initialized
[    0.150148] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.156115] VFS: Disk quotas dquot_6.5.2
[    0.156620] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.157660] fuse init (API version 7.16)
[    0.158180] msgmni has been set to 972
[    0.161560] Freeing initrd memory: 2000k freed
[    0.165512] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[    0.166371] io scheduler noop registered
[    0.166837] io scheduler deadline registered (default)
[    0.167423] io scheduler cfq registered
[    0.167937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.168560] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.169312] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.170146] ACPI: Power Button [PWRF]
[    0.171093] ERST: Table is not found!
[    0.171635] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.172268] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
11 (level, high) -> IRQ 11
[    0.173342] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.173965] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
10 (level, high) -> IRQ 10
[    0.175396] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.176908] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
10 (level, high) -> IRQ 10
[    0.179328] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.202858] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.223658] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.245496] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.266837] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.267546] Linux agpgart interface v0.103
[    0.268626] brd: module loaded
[    0.269293] loop: module loaded
[    0.283115]  vda: vda1
[    0.285258] scsi0 : ata_piix
[    0.286262] scsi1 : ata_piix
[    0.287206] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[    0.288840] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[    0.290751] Fixed MDIO Bus: probed
[    0.291758] PPP generic driver version 2.4.2
[    0.292961] tun: Universal TUN/TAP device driver, 1.6
[    0.294237] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.367427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.369053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.370623] uhci_hcd: USB Universal Host Controller Interface driver
[    0.372247] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
10 (level, high) -> IRQ 10
[    0.374444] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    0.375886] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[    0.378008] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
[    0.379709] hub 1-0:1.0: USB hub found
[    0.380843] hub 1-0:1.0: 2 ports detected
[    0.382181] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
at 0x60,0x64 irq 1,12
[    0.383712] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.384268] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.384902] mousedev: PS/2 mouse device common for all mice
[    0.385581] rtc_cmos 00:01: RTC can wake from S4
[    0.386219] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.386944] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.387677] device-mapper: uevent: version 1.0.3
[    0.388249] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel@xxxxxxxxxx
[    0.389200] cpuidle: using governor ladder
[    0.389694] cpuidle: using governor menu
[    0.390148] EFI Variables Facility v0.08 2004-May-17
[    0.390826] TCP cubic registered
[    0.391311] NET: Registered protocol family 10
[    0.392174] NET: Registered protocol family 17
[    0.392714] Registering the dns_resolver key type
[    0.393321] registered taskstats version 1
[    0.393981] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[    0.397108]   Magic number: 1:90:886
[    0.397602] rtc_cmos 00:01: setting system clock to 2013-02-20
12:52:56 UTC (1361364776)
[    0.398525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.399188] EDD information not available.
[    0.550030] Freeing unused kernel memory: 900k freed
[    0.551849] Write protecting the kernel read-only data: 12288k
[    0.560335] Freeing unused kernel memory: 1968k freed
[    0.564771] Freeing unused kernel memory: 1368k freed

info: initramfs: up at 0.56
NOCHANGE: partition 1 is size 64260. it cannot be grown
info: initramfs loading root from /dev/vda1
info: /etc/init.d/rc.sysinit: up at 0.72
[    0.722727] EXT3-fs (vda1): warning: checktime reached, running
e2fsck is recommended
Starting logging: OK
Initializing random number generator... done.
Starting network...
udhcpc (v1.18.5) started
Sending discover...
Sending select for 10.5.5.3...
Lease of 10.5.5.3 obtained, lease time 120
deleting routers
route: SIOCDELRT: No such process
adding dns 8.8.8.8
cloud-setup: checking http://169.254.169.254/2009-04-04/meta-data/instance-id
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 1/30: up 0.84. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 2/30: up 191.17. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 3/30: up 381.64. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 4/30: up 572.10. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 5/30: up 762.57. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 6/30: up 953.03. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 7/30: up 1143.49. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 8/30: up 1333.96. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 9/30: up 1524.42. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 10/30: up 1714.89. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 11/30: up 1905.35. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 12/30: up 2095.81. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 13/30: up 2286.28. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 14/30: up 2476.74. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 15/30: up 2667.21. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 16/30: up 2857.67. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 17/30: up 3048.13. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 18/30: up 3238.60. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 19/30: up 3429.06. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 20/30: up 3619.53. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 21/30: up 3809.99. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 22/30: up 4000.45. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 23/30: up 4190.92. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 24/30: up 4381.38. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 25/30: up 4571.85. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 26/30: up 4762.31. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 27/30: up 4952.77. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 28/30: up 5143.24. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 29/30: up 5333.70. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 30/30: up 5524.17. request failed
cloud-setup: after 30 fails, debugging
cloud-setup: running debug (30 tries reached)
############ debug start ##############
### /etc/rc.d/init.d/sshd start
/etc/rc3.d/S45-cloud-setup: line 66: /etc/rc.d/init.d/sshd: not found
### ifconfig -a
eth0      Link encap:Ethernet  HWaddr FA:16:3E:A2:6E:02
          inet addr:10.5.5.3  Bcast:10.5.5.255  Mask:255.255.255.0
          inet6 addr: fe80::f816:3eff:fea2:6e02/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1025 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1190 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:127682 (124.6 KiB)  TX bytes:125076 (122.1 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

### route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.5.5.1        0.0.0.0         UG    0      0        0 eth0
10.5.5.0        0.0.0.0         255.255.255.0   U     0      0        0 eth0
### cat /etc/resolv.conf
search openstacklocal
nameserver 8.8.8.8
### ping -c 5 10.5.5.1
PING 10.5.5.1 (10.5.5.1): 56 data bytes

--- 10.5.5.1 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
### pinging nameservers
#### ping -c 5 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes

--- 8.8.8.8 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
### uname -a
Linux cirros 3.0.0-12-virtual #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC
2011 x86_64 GNU/Linux
### lsmod
Module                  Size  Used by    Not tainted
vfat                   17585  0
fat                    61475  1 vfat
isofs                  40253  0
ip_tables              27473  0
x_tables               29846  1 ip_tables
pcnet32                42078  0
8139cp                 27412  0
ne2k_pci               13691  0
8390                   18856  1 ne2k_pci
e1000                 108573  0
acpiphp                24080  0
### dmesg | tail
[    0.763132] acpiphp: Slot [30] registered
[    0.763139] acpiphp: Slot [31] registered
[    0.767287] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.767291] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.770137] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[    0.772344] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.781780] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
[    0.786775] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.112086] Refined TSC clocksource calibration: 3392.132 MHz.
[    1.680348] eth0: IPv6 duplicate address fe80::f816:3eff:fea2:6e02 detected!
### tail -n 25 /var/log/messages
Feb 20 05:52:56 cirros kern.info kernel: [    0.763011] acpiphp: Slot
[15] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763018] acpiphp: Slot
[16] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763025] acpiphp: Slot
[17] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763033] acpiphp: Slot
[18] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763040] acpiphp: Slot
[19] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763047] acpiphp: Slot
[20] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763054] acpiphp: Slot
[21] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763062] acpiphp: Slot
[22] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763070] acpiphp: Slot
[23] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763077] acpiphp: Slot
[24] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763084] acpiphp: Slot
[25] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763091] acpiphp: Slot
[26] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763099] acpiphp: Slot
[27] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763106] acpiphp: Slot
[28] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763124] acpiphp: Slot
[29] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763132] acpiphp: Slot
[30] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.763139] acpiphp: Slot
[31] registered
Feb 20 05:52:56 cirros kern.info kernel: [    0.767287] e1000:
Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Feb 20 05:52:56 cirros kern.info kernel: [    0.767291] e1000:
Copyright (c) 1999-2006 Intel Corporation.
Feb 20 05:52:56 cirros kern.info kernel: [    0.770137]
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
Feb 20 05:52:56 cirros kern.info kernel: [    0.772344] 8139cp:
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 20 05:52:56 cirros kern.info kernel: [    0.781780] pcnet32:
pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
Feb 20 05:52:56 cirros kern.info kernel: [    0.786775] ip_tables: (C)
2000-2006 Netfilter Core Team
Feb 20 05:52:57 cirros kern.info kernel: [    1.112086] Refined TSC
clocksource calibration: 3392.132 MHz.
Feb 20 05:52:57 cirros kern.info kernel: [    1.680348] eth0: IPv6
duplicate address fe80::f816:3eff:fea2:6e02 detected!
############ debug end   ##############
cloud-setup: failed to read iid from metadata. tried 30
WARN: /etc/rc3.d/S45-cloud-setup failed
Starting dropbear sshd: generating rsa key... generating dsa key... OK
===== cloud-final: system completely up in 5743.03 seconds ====
wget: can't connect to remote host (169.254.169.254): Connection timed out
wget: can't connect to remote host (169.254.169.254): Connection timed out
wget: can't connect to remote host (169.254.169.254): Connection timed out
  instance-id:
  public-ipv4:
  local-ipv4 :
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-userdata: failed to read instance id
WARN: /etc/rc3.d/S99-cloud-userdata failed
  ____               ____  ____
 / __/ __ ____ ____ / __ \/ __/
/ /__ / // __// __// /_/ /\ \
\___//_//_/  /_/   \____/___/
 http://launchpad.net/cirros



login as 'cirros' user. default password: 'cubswin:)'. use 'sudo' for root.

cirros login:


Thanks for the help.


On 21 February 2013 08:33, Sylvain Bauza <sylvain.bauza@xxxxxxxxxxxx> wrote:

>  Le 20/02/2013 23:04, Chathura M. Sarathchandra Magurawalage a écrit :
>
>  Thanks.
>
>   I would be more concerned about the SIOCDELRT error above. Do you try
>> to manually remove a network route at bootup ? Seems like the 'route del'
>> is failing because the route is not already existing.
>>
>>  I am not doing doing anything that I am aware of.
>
>>
>> As already said, you absolutely need VNC support for investigating. Could
>> you please fix your VNC setup which is incorrect ?
>>
>
> But VNC works fine. Its just that it VM hangs on the boot up it wont come
> to the log in prompt, I can't log into it.  :(
>
>
>
> Ahuh. Sorry for bugging you, I haven't understand : is your VM failing to
> boot up ?
> Which distro is your VM based on ?
>
> From my POV, your console.log is fine : your VM is booting, getting DHCP
> lease, trying to contact metadata server, failing to contact it, and that's
> it. You should get a prompt when logging in thru VNC.
>
> Please clarify : either the VM is failing to boot up properly (and then
> try to find a small and cloud-out-of-the-box distro like CirrOS for
> testing, or try with runlevel 3 or interactive startup), or your VM is
> properly started without network connectivity (and then you have to login
> and try more diagnostic tools like ping/tcpdump).
>
>
> Thanks,
> -Sylvain
>

Follow ups

References