openstack team mailing list archive
-
openstack team
-
Mailing list archive
-
Message #21146
Re: Cant ping private or floating IP
So I have got two VMs, they can ping eachother. But they cannot ping the
gateway.
Just for the record. From my controller/network-node I can ping the
provider router.
root@controller
:~# quantum router-list
+--------------------------------------+-----------------+--------------------------------------------------------+
| id | name |
external_gateway_info |
+--------------------------------------+-----------------+--------------------------------------------------------+
| 1b4b108f-aefa-4548-acc4-d2441038a33f | provider-router | {"network_id":
"26b88521-5d1e-4f40-a4f5-74f8a8136335"} |
+--------------------------------------+-----------------+--------------------------------------------------------+
[DEFAULT]
# Show debugging output in log (sets DEBUG log level output)
# debug = True
# L3 requires that an interface driver be set. Choose the one that best
# matches your plugin.
# OVS
interface_driver = quantum.agent.linux.interface.OVSInterfaceDriver
# LinuxBridge
#interface_driver = quantum.agent.linux.interface.BridgeInterfaceDriver
# The Quantum user information for accessing the Quantum API.
auth_url = http://localhost:35357/v2.0
auth_region = RegionOne
admin_tenant_name = service
admin_user = quantum
admin_password = password
# Use "sudo quantum-rootwrap /etc/quantum/rootwrap.conf" to use the real
# root filter facility.
# Change to "sudo" to skip the filtering and just run the comand directly
root_helper = sudo /usr/bin/quantum-rootwrap /etc/quantum/rootwrap.conf
# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and
# iproute2 package that supports namespaces).
use_namespaces = False
# If use_namespaces is set as False then the agent can only configure one
router.
# This is done by setting the specific router_id.
router_id = 1b4b108f-aefa-4548-acc4-d2441038a33f
# Each L3 agent can be associated with at most one external network. This
# value should be set to the UUID of that external network. If empty,
# the agent will enforce that only a single external networks exists and
# use that external network id
gateway_external_network_id = 26b88521-5d1e-4f40-a4f5-74f8a8136335
# Indicates that this L3 agent should also handle routers that do not have
# an external network gateway configured. This option should be True only
# for a single agent in a Quantum deployment, and may be False for all
agents
# if all routers must have an external network gateway
# handle_internal_only_routers = True
# Name of bridge used for external network traffic. This should be set to
# empty value for the linux bridge
external_network_bridge = br-ex
# IP address used by Nova metadata server
metadata_ip = 192.168.2.225
# TCP Port used by Nova metadata server
# metadata_port = 8775
# The time in seconds between state poll requests
# polling_interval = 3
root@controller:~# sudo tcpdump -i eth0.2 -nn | grep GRE
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes
15:17:58.479140 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 98: IP6
fe80::c85b:8dff:fe4d:6dfb > ff02::1:ff4d:6dfb: HBH ICMP6, multicast
listener reportmax resp delay: 0 addr: ff02::1:ff4d:6dfb, length 24
15:17:58.627100 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 98: IP6
fe80::2844:a3ff:fed1:7df3 > ff02::1:ffd1:7df3: HBH ICMP6, multicast
listener reportmax resp delay: 0 addr: ff02::1:ffd1:7df3, length 24
15:17:59.382410 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:00.378904 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:01.378903 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:02.385160 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:03.382894 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:03.388210 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:18:03.388236 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:18:03.388246 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:18:03.388888 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:18:08.403093 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:09.402916 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:10.298390 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:10.402924 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:11.294904 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:12.294913 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:25.312944 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:26.310912 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:27.310895 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:32.319959 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:33.318897 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:34.318918 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:35.322834 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:36.318925 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:36.325485 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:36.325511 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:36.325525 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:36.326108 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:41.331088 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:42.330900 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:43.330903 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:19:03.453248 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:04.450896 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:05.450899 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:33.483521 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:34.482921 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:35.482911 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:36.390216 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:19:37.386903 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:19:38.386905 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:19:48.498690 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:49.494912 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:50.494922 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:55.505851 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:56.502912 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:57.502911 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:58.508429 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:59.506909 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:59.511616 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:19:59.511641 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:19:59.511652 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:19:59.512382 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:20:03.711078 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 98: IP6
fe80::c85b:8dff:fe4d:6dfb > ff02::1:ff4d:6dfb: HBH ICMP6, multicast
listener reportmax resp delay: 0 addr: ff02::1:ff4d:6dfb, length 24
15:20:03.815067 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 98: IP6
fe80::2844:a3ff:fed1:7df3 > ff02::1:ffd1:7df3: HBH ICMP6, multicast
listener reportmax resp delay: 0 addr: ff02::1:ffd1:7df3, length 24
15:20:04.515054 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:20:05.514893 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:20:06.402892 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:06.514919 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:20:07.398910 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:08.398913 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:21.404862 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:22.402900 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:23.402904 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:28.405674 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:29.402894 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:30.402913 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:31.405714 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:32.402919 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:32.407948 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:20:32.407974 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:20:32.407986 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:20:32.408728 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:20:37.411052 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:38.410918 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:39.410896 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:20:59.567749 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:21:00.566914 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:21:01.566893 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:21:20.539385 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at 2a:44:a3:d1:7d:f3, length 28
15:21:20.539417 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at ca:5b:8d:4d:6d:fb, length 28
15:21:29.583747 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:21:29.587195 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.2 is-at 2a:44:a3:d1:7d:f3, length 28
15:21:29.587220 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.2 is-at ca:5b:8d:4d:6d:fb, length 28
15:21:32.472558 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:21:33.470921 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:21:34.470920 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:02.502741 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:03.498903 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:04.498910 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:07.367450 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at 2a:44:a3:d1:7d:f3, length 28
15:22:07.367476 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at ca:5b:8d:4d:6d:fb, length 28
15:22:08.819063 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 98: IP6
fe80::c85b:8dff:fe4d:6dfb > ff02::1:ff4d:6dfb: HBH ICMP6, multicast
listener reportmax resp delay: 0 addr: ff02::1:ff4d:6dfb, length 24
15:22:09.335068 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 98: IP6
fe80::2844:a3ff:fed1:7df3 > ff02::1:ffd1:7df3: HBH ICMP6, multicast
listener reportmax resp delay: 0 addr: ff02::1:ffd1:7df3, length 24
15:22:17.517928 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:18.514903 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:19.514909 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:24.525010 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:25.522896 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:26.522895 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:27.527868 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:28.526907 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:28.530086 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:22:28.530112 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:22:28.530122 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:22:28.530578 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:22:29.591728 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.4.68: BOOTP/DHCP, Reply, length 318
15:22:33.539073 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:34.538891 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:34.595074 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:22:35.538887 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:22:35.594887 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:22:36.594890 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:22:45.371464 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at 2a:44:a3:d1:7d:f3, length 28
15:22:45.371493 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at ca:5b:8d:4d:6d:fb, length 28
icmpicmpicmpicmpicmpicmp15:23:23.375417 IP 192.168.2.225 > 10.0.0.3: GREv0,
key=0x1, length 54: ARP, Reply 10.5.5.1 is-at 2a:44:a3:d1:7d:f3, length 28
15:23:23.375446 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Reply 10.5.5.1 is-at ca:5b:8d:4d:6d:fb, length 28
uest who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:09.402916 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:10.298390 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:10.402924 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:18:11.294904 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:12.294913 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:25.312944 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:26.310912 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:27.310895 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:32.319959 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:33.318897 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:34.318918 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:35.322834 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:36.318925 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:36.325485 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:36.325511 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:36.325525 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:36.326108 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 372: IP
10.5.5.2.67 > 10.5.5.3.68: BOOTP/DHCP, Reply, length 318
15:18:41.331088 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:42.330900 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:18:43.330903 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.3 tell 10.5.5.2, length 28
15:19:03.453248 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
15:19:04.450896 IP 192.168.2.225 > 10.0.0.3: GREv0, key=0x1, length 54:
ARP, Request who-has 10.5.5.4 tell 10.5.5.2, length 28
......
Thanks.
On 21 February 2013 12:45, Sylvain Bauza <sylvain.bauza@xxxxxxxxxxxx> wrote:
> Thanks for the heads-up. So, the VM is able to reach the DHCP server and
> get a lease, but unable to contact the provider router IP (on its subnet).
> Could you please start a second VM using the same way and check network
> connectivity in between both ?
>
> I would say the issue is tied to the L3 agent, as DHCP is working and
> communication is OK.
> Please check on the physical layer (probably eth0) on network node that
> GRE'd ICMP packet is coming in (and hoping coming *back*) when pinging your
> gateway :
>
> sudo tcpdump -i eth0 -nn | grep GRE
>
>
> Also, make sure /etc/quantum/l3_agent.ini is correct with router_id and
> gateway_external_net_id set correctly.
>
> -Sylvain
>
> Le 21/02/2013 12:45, Chathura M. Sarathchandra Magurawalage a écrit :
>
> Hello
>
> Sorry, it comes to the log in prompt but it takes quite long, I just did
> not realise.
>
> I have got a running Corros VM. This is the log.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.0.0-12-virtual (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0 console=ttyS0 console=hvc0
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] No AGP bridge found
> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
> [ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
> [ 0.000000] ACPI: FACS 000000001fffff40 00040
> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
> [ 0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009d
> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:deffc000)
> [ 0.000000] Booting paravirtualized kernel on KVM
> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296 r8192 d23104 u2097152
> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
> [ 0.000000] KVM setup async PF for cpu 0
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129157
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro console=tty0 console=ttyS0 console=hvc0
> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
> [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Memory: 497852k/524276k available (6206k kernel code, 460k absent, 25964k reserved, 6907k data, 900k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] allocated 4194304 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Detected 3392.282 MHz processor.
> [ 0.008000] Calibrating delay loop (skipped) preset value.. 6784.56 BogoMIPS (lpj=13569128)
> [ 0.008000] pid_max: default: 32768 minimum: 301
> [ 0.008000] Security Framework initialized
> [ 0.008000] AppArmor: AppArmor initialized
> [ 0.008000] Yama: becoming mindful.
> [ 0.008000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.008292] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.009146] Mount-cache hash table entries: 256
> [ 0.009772] Initializing cgroup subsys cpuacct
> [ 0.010285] Initializing cgroup subsys memory
> [ 0.010791] Initializing cgroup subsys devices
> [ 0.011312] Initializing cgroup subsys freezer
> [ 0.012004] Initializing cgroup subsys net_cls
> [ 0.012523] Initializing cgroup subsys blkio
> [ 0.013027] Initializing cgroup subsys perf_event
> [ 0.013608] mce: CPU supports 10 MCE banks
> [ 0.014264] SMP alternatives: switching to UP code
> [ 0.028279] Freeing SMP alternatives: 24k freed
> [ 0.028805] ACPI: Core revision 20110413
> [ 0.029869] ftrace: allocating 26075 entries in 103 pages
> [ 0.032199] Enabling x2apic
> [ 0.032576] Enabled x2apic
> [ 0.036005] Switched APIC routing to physical x2apic.
> [ 0.037122] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.037755] CPU0: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz stepping 09
> [ 0.040002] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
> [ 0.040002] Brought up 1 CPUs
> [ 0.040002] Total of 1 processors activated (6784.56 BogoMIPS).
> [ 0.040002] devtmpfs: initialized
> [ 0.040252] print_constraints: dummy:
> [ 0.040734] Time: 12:52:56 Date: 02/20/13
> [ 0.041230] NET: Registered protocol family 16
> [ 0.041798] ACPI: bus type pci registered
> [ 0.042317] PCI: Using configuration type 1 for base access
> [ 0.043298] bio: create slab <bio-0> at 0
> [ 0.044935] ACPI: Interpreter enabled
> [ 0.045378] ACPI: (supports S0 S3 S4 S5)
> [ 0.046026] ACPI: Using IOAPIC for interrupt routing
> [ 0.048451] ACPI: No dock devices found.
> [ 0.048911] HEST: Table not found.
> [ 0.049321] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.050338] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.052351] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
> [ 0.053173] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
> [ 0.068180] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
> [ 0.072782] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> [ 0.073647] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> [ 0.074501] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> [ 0.075362] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> [ 0.076190] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
> [ 0.077090] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.077982] vgaarb: loaded
> [ 0.078336] vgaarb: bridge control possible 0000:00:02.0
> [ 0.079070] SCSI subsystem initialized
> [ 0.079669] usbcore: registered new interface driver usbfs
> [ 0.080016] usbcore: registered new interface driver hub
> [ 0.080613] usbcore: registered new device driver usb
> [ 0.081265] PCI: Using ACPI for IRQ routing
> [ 0.081952] NetLabel: Initializing
> [ 0.082368] NetLabel: domain hash size = 128
> [ 0.082869] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.083417] NetLabel: unlabeled traffic allowed by default
> [ 0.084051] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.084774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.085480] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
> [ 0.092086] Switching to clocksource kvm-clock
> [ 0.095414] Switched to NOHz mode on CPU #0
> [ 0.097611] AppArmor: AppArmor Filesystem Enabled
> [ 0.098148] pnp: PnP ACPI init
> [ 0.098557] ACPI: bus type pnp registered
> [ 0.099474] pnp: PnP ACPI: found 8 devices
> [ 0.099943] ACPI: ACPI bus type pnp unregistered
> [ 0.105880] NET: Registered protocol family 2
> [ 0.106424] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.107293] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.108257] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.109056] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.109725] TCP reno registered
> [ 0.110113] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.110736] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.111434] NET: Registered protocol family 1
> [ 0.111938] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> [ 0.112577] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> [ 0.113189] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> [ 0.114074] Trying to unpack rootfs image as initramfs...
> [ 0.120216] audit: initializing netlink socket (disabled)
> [ 0.120809] type=2000 audit(1361364777.116:1): initialized
> [ 0.150148] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.156115] VFS: Disk quotas dquot_6.5.2
> [ 0.156620] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.157660] fuse init (API version 7.16)
> [ 0.158180] msgmni has been set to 972
> [ 0.161560] Freeing initrd memory: 2000k freed
> [ 0.165512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.166371] io scheduler noop registered
> [ 0.166837] io scheduler deadline registered (default)
> [ 0.167423] io scheduler cfq registered
> [ 0.167937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.168560] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.169312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 0.170146] ACPI: Power Button [PWRF]
> [ 0.171093] ERST: Table is not found!
> [ 0.171635] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 0.172268] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
> [ 0.173342] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> [ 0.173965] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
> [ 0.175396] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> [ 0.176908] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
> [ 0.179328] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.202858] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.223658] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.245496] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.266837] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.267546] Linux agpgart interface v0.103
> [ 0.268626] brd: module loaded
> [ 0.269293] loop: module loaded
> [ 0.283115] vda: vda1
> [ 0.285258] scsi0 : ata_piix
> [ 0.286262] scsi1 : ata_piix
> [ 0.287206] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
> [ 0.288840] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
> [ 0.290751] Fixed MDIO Bus: probed
> [ 0.291758] PPP generic driver version 2.4.2
> [ 0.292961] tun: Universal TUN/TAP device driver, 1.6
> [ 0.294237] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [ 0.367427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.369053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.370623] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.372247] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
> [ 0.374444] uhci_hcd 0000:00:01.2: UHCI Host Controller
> [ 0.375886] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
> [ 0.378008] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
> [ 0.379709] hub 1-0:1.0: USB hub found
> [ 0.380843] hub 1-0:1.0: 2 ports detected
> [ 0.382181] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 0.383712] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.384268] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.384902] mousedev: PS/2 mouse device common for all mice
> [ 0.385581] rtc_cmos 00:01: RTC can wake from S4
> [ 0.386219] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 0.386944] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
> [ 0.387677] device-mapper: uevent: version 1.0.3
> [ 0.388249] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx
> [ 0.389200] cpuidle: using governor ladder
> [ 0.389694] cpuidle: using governor menu
> [ 0.390148] EFI Variables Facility v0.08 2004-May-17
> [ 0.390826] TCP cubic registered
> [ 0.391311] NET: Registered protocol family 10
> [ 0.392174] NET: Registered protocol family 17
> [ 0.392714] Registering the dns_resolver key type
> [ 0.393321] registered taskstats version 1
> [ 0.393981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
> [ 0.397108] Magic number: 1:90:886
> [ 0.397602] rtc_cmos 00:01: setting system clock to 2013-02-20 12:52:56 UTC (1361364776)
> [ 0.398525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 0.399188] EDD information not available.
> [ 0.550030] Freeing unused kernel memory: 900k freed
> [ 0.551849] Write protecting the kernel read-only data: 12288k
> [ 0.560335] Freeing unused kernel memory: 1968k freed
> [ 0.564771] Freeing unused kernel memory: 1368k freed
>
> info: initramfs: up at 0.56
> NOCHANGE: partition 1 is size 64260. it cannot be grown
> info: initramfs loading root from /dev/vda1
> info: /etc/init.d/rc.sysinit: up at 0.72
> [ 0.722727] EXT3-fs (vda1): warning: checktime reached, running e2fsck is recommended
> Starting logging: OK
> Initializing random number generator... done.
> Starting network...
> udhcpc (v1.18.5) started
> Sending discover...
> Sending select for 10.5.5.3...
> Lease of 10.5.5.3 obtained, lease time 120
> deleting routers
> route: SIOCDELRT: No such process
> adding dns 8.8.8.8
> cloud-setup: checking http://169.254.169.254/2009-04-04/meta-data/instance-id
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 1/30: up 0.84. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 2/30: up 191.17. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 3/30: up 381.64. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 4/30: up 572.10. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 5/30: up 762.57. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 6/30: up 953.03. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 7/30: up 1143.49. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 8/30: up 1333.96. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 9/30: up 1524.42. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 10/30: up 1714.89. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 11/30: up 1905.35. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 12/30: up 2095.81. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 13/30: up 2286.28. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 14/30: up 2476.74. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 15/30: up 2667.21. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 16/30: up 2857.67. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 17/30: up 3048.13. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 18/30: up 3238.60. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 19/30: up 3429.06. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 20/30: up 3619.53. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 21/30: up 3809.99. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 22/30: up 4000.45. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 23/30: up 4190.92. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 24/30: up 4381.38. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 25/30: up 4571.85. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 26/30: up 4762.31. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 27/30: up 4952.77. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 28/30: up 5143.24. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 29/30: up 5333.70. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 30/30: up 5524.17. request failed
> cloud-setup: after 30 fails, debugging
> cloud-setup: running debug (30 tries reached)
> ############ debug start ##############
> ### /etc/rc.d/init.d/sshd start
> /etc/rc3.d/S45-cloud-setup: line 66: /etc/rc.d/init.d/sshd: not found
> ### ifconfig -a
> eth0 Link encap:Ethernet HWaddr FA:16:3E:A2:6E:02
> inet addr:10.5.5.3 Bcast:10.5.5.255 Mask:255.255.255.0
> inet6 addr: fe80::f816:3eff:fea2:6e02/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1025 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1190 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:127682 (124.6 KiB) TX bytes:125076 (122.1 KiB)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> ### route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 0.0.0.0 10.5.5.1 0.0.0.0 UG 0 0 0 eth0
> 10.5.5.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> ### cat /etc/resolv.conf
> search openstacklocal
> nameserver 8.8.8.8
> ### ping -c 5 10.5.5.1
> PING 10.5.5.1 (10.5.5.1): 56 data bytes
>
> --- 10.5.5.1 ping statistics ---
> 5 packets transmitted, 0 packets received, 100% packet loss
> ### pinging nameservers
> #### ping -c 5 8.8.8.8
> PING 8.8.8.8 (8.8.8.8): 56 data bytes
>
> --- 8.8.8.8 ping statistics ---
> 5 packets transmitted, 0 packets received, 100% packet loss
> ### uname -a
> Linux cirros 3.0.0-12-virtual #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC 2011 x86_64 GNU/Linux
> ### lsmod
> Module Size Used by Not tainted
> vfat 17585 0
> fat 61475 1 vfat
> isofs 40253 0
> ip_tables 27473 0
> x_tables 29846 1 ip_tables
> pcnet32 42078 0
> 8139cp 27412 0
> ne2k_pci 13691 0
> 8390 18856 1 ne2k_pci
> e1000 108573 0
> acpiphp 24080 0
> ### dmesg | tail
> [ 0.763132] acpiphp: Slot [30] registered
> [ 0.763139] acpiphp: Slot [31] registered
> [ 0.767287] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> [ 0.767291] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [ 0.770137] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> [ 0.772344] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [ 0.781780] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
> [ 0.786775] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.112086] Refined TSC clocksource calibration: 3392.132 MHz.
> [ 1.680348] eth0: IPv6 duplicate address fe80::f816:3eff:fea2:6e02 detected!
> ### tail -n 25 /var/log/messages
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763011] acpiphp: Slot [15] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763018] acpiphp: Slot [16] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763025] acpiphp: Slot [17] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763033] acpiphp: Slot [18] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763040] acpiphp: Slot [19] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763047] acpiphp: Slot [20] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763054] acpiphp: Slot [21] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763062] acpiphp: Slot [22] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763070] acpiphp: Slot [23] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763077] acpiphp: Slot [24] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763084] acpiphp: Slot [25] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763091] acpiphp: Slot [26] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763099] acpiphp: Slot [27] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763106] acpiphp: Slot [28] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763124] acpiphp: Slot [29] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763132] acpiphp: Slot [30] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.763139] acpiphp: Slot [31] registered
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.767287] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.767291] e1000: Copyright (c) 1999-2006 Intel Corporation.
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.770137] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.772344] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.781780] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
> Feb 20 05:52:56 cirros kern.info kernel: [ 0.786775] ip_tables: (C) 2000-2006 Netfilter Core Team
> Feb 20 05:52:57 cirros kern.info kernel: [ 1.112086] Refined TSC clocksource calibration: 3392.132 MHz.
> Feb 20 05:52:57 cirros kern.info kernel: [ 1.680348] eth0: IPv6 duplicate address fe80::f816:3eff:fea2:6e02 detected!
> ############ debug end ##############
> cloud-setup: failed to read iid from metadata. tried 30
> WARN: /etc/rc3.d/S45-cloud-setup failed
> Starting dropbear sshd: generating rsa key... generating dsa key... OK
> ===== cloud-final: system completely up in 5743.03 seconds ====
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> instance-id:
> public-ipv4:
> local-ipv4 :
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-userdata: failed to read instance id
> WARN: /etc/rc3.d/S99-cloud-userdata failed
> ____ ____ ____
> / __/ __ ____ ____ / __ \/ __/
> / /__ / // __// __// /_/ /\ \
> \___//_//_/ /_/ \____/___/
> http://launchpad.net/cirros
>
>
>
> login as 'cirros' user. default password: 'cubswin:)'. use 'sudo' for root.
>
> cirros login:
>
>
> Thanks for the help.
>
>
> On 21 February 2013 08:33, Sylvain Bauza <sylvain.bauza@xxxxxxxxxxxx>wrote:
>
>> Le 20/02/2013 23:04, Chathura M. Sarathchandra Magurawalage a écrit :
>>
>> Thanks.
>>
>> I would be more concerned about the SIOCDELRT error above. Do you try
>>> to manually remove a network route at bootup ? Seems like the 'route del'
>>> is failing because the route is not already existing.
>>>
>>> I am not doing doing anything that I am aware of.
>>
>>>
>>> As already said, you absolutely need VNC support for investigating.
>>> Could you please fix your VNC setup which is incorrect ?
>>>
>>
>> But VNC works fine. Its just that it VM hangs on the boot up it wont come
>> to the log in prompt, I can't log into it. :(
>>
>>
>>
>> Ahuh. Sorry for bugging you, I haven't understand : is your VM failing
>> to boot up ?
>> Which distro is your VM based on ?
>>
>> From my POV, your console.log is fine : your VM is booting, getting DHCP
>> lease, trying to contact metadata server, failing to contact it, and that's
>> it. You should get a prompt when logging in thru VNC.
>>
>> Please clarify : either the VM is failing to boot up properly (and then
>> try to find a small and cloud-out-of-the-box distro like CirrOS for
>> testing, or try with runlevel 3 or interactive startup), or your VM is
>> properly started without network connectivity (and then you have to login
>> and try more diagnostic tools like ping/tcpdump).
>>
>>
>> Thanks,
>> -Sylvain
>>
>
>
>
Follow ups
References
-
Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-14
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Guilherme Russi, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-18
-
Re: Cant ping private or floating IP
From: Sylvain Bauza, 2013-02-20
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-20
-
Re: Cant ping private or floating IP
From: Sylvain Bauza, 2013-02-20
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-20
-
Re: Cant ping private or floating IP
From: Sylvain Bauza, 2013-02-21
-
Re: Cant ping private or floating IP
From: Chathura M. Sarathchandra Magurawalage, 2013-02-21
-
Re: Cant ping private or floating IP
From: Sylvain Bauza, 2013-02-21
