openstack team mailing list archive
-
openstack team
-
Mailing list archive
-
Message #21839
Re: [Openstack-operators] Help with simplest Quantum setup possible...
Guys,
Here:
http://docs.openstack.org/trunk/openstack-network/admin/content/demo_flat_installions.html
...at the step "1. Install the L2 agent." but, what is the name of the
Ubuntu package (I'm using Folsom)?
...apt-get install what?
I thought that the Quantum L2 agent was the package
`quantum-plugin-linuxbridge' but, this doc uses OpenvSwitch... So, I'm
confused now...
The following packages "quantum-server
quantum-plugin-openvswitch quantum-plugin-openvswitch-agent
quantum-dhcp-agent" will be enough for my `controller+network node'?
At the compute-node, I'll install only the
"quantum-plugin-openvswitch-agent", right?
Tks,
Thiago
On 13 March 2013 00:58, Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx> wrote:
> Daneyon,
>
> Thank you for your time! I'll check it!
>
> I read that guide from Cisto once... Too complex.
>
> I also, tried the following guides too, appears to be like the one from
> Cisco:
>
>
> https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/stable/GRE/OpenStack_Folsom_Install_Guide_WebVersion.rst
>
> and:
>
> https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/GRE/2NICs/OpenStack_Folsom_Install_Guide_WebVersion.rst
>
>
> Anyway, at first, I do not want L3 or GRE. Only the most basic setup
> (Flat / L2).
>
> Do you know if my `controller+network node' server eth0 needs to be
> promisc?
>
> Tks!
> Thiago
>
>
> On 13 March 2013 00:49, Daneyon Hansen (danehans) <danehans@xxxxxxxxx>wrote:
>
>>
>> Make sure the quantum-dhcp and l3 agents are running and properly
>> configured. It sounds like either the q-dhcp agent is not functioning or
>> connectivity between the dhcp agent and vm is not functioning. If using
>> GRE tunnels, test connectivity between the tunnel endpoints. You should
>> also see the IP's of your tunnel peers in ovs-vsctl show. If your instance
>> spawns successfully, console into it and manually assign an IP and ping the
>> q-l3-agent and q-dhcp agent. You can follow this guide for deploying
>> Quantum with OpenvSwitch using GRE tunnels:
>>
>>
>> http://docwiki.cisco.com/wiki/Cisco_OpenStack_Edition:_Folsom_Manual_Install
>>
>> Regards,
>> Daneyon Hansen
>>
>> From: Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx>
>> Date: Tuesday, March 12, 2013 8:14 PM
>> To: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>, "
>> openstack-operators@xxxxxxxxxxxxxxxxxxx" <
>> openstack-operators@xxxxxxxxxxxxxxxxxxx>
>> Subject: Re: [Openstack-operators] Help with simplest Quantum setup
>> possible...
>>
>> Well,
>>
>> Just for the record, I'll stick with Quatum + OpenvSwtich... Someone
>> on IRC told me that it is the best way to go with Quantum.
>>
>> I'm still needing help to set it up (Single Flat / multi=false, still
>> the same simplest topology).
>>
>> OpenvSwitch is already working, bridges `br-int' and `br-eth0'
>> created...
>>
>> My main problem, I think, is that my Instances doesn't get an IP (they
>> supposed to be at 10.33.14.X/24).
>>
>> Everything else seems to be working as expected, no apparent errors on
>> the logs... quantum net-create / subnet-create worked...
>>
>> I appreciate any help, tips or docs!
>>
>> Best!
>> Thiago
>>
>>
>> On 12 March 2013 23:34, Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx>wrote:
>>
>>> Hi!
>>>
>>> Sorry about the double posting... I need help! :-P
>>>
>>> I'm trying, without any kind of success, to deploy OpenStack with
>>> Quantum on its simplest scenario, I think, which is `Single Flat' with
>>> `Linux Bridge' plugin.
>>>
>>> My topology is:
>>>
>>> 1 firewall with 2 ethX (eth0 public, eth1 10.32.14.1 and 10.33.14.1)
>>> 1 controller with 1 eth0 (10.32.14.232/24 gateway 10.32.14.1)
>>> 1 node with 1 eth0 (10.32.14.234/24 gateway 10.32.14.1)
>>>
>>> Instances Network:
>>> 10.33.14.0/24 (Instances gateway must be 10.33.14.1, same router of
>>> the physical servers above, NOT its own host hypervisor).
>>>
>>> I'm trying this:
>>>
>>>
>>> http://docs.openstack.org/trunk/openstack-network/admin/content/demo_flat_installions.html- doesn't work... Even enabling OpenvSwith (but I don't want it for now,
>>> only Quantum instead of nova-network, with Linux Bridge for the sake of
>>> simplicity).
>>>
>>> The following guide help me a lot (with Nova Network everything is
>>> fine): http://openstack-folsom-install-guide.readthedocs.org/en/latest/- I'm trying to follow it, by replacing nota-network instructions, for
>>> Quantum instructions but, doesn't work...
>>>
>>> Any docs or tips?
>>>
>>> NOTE: I do not want any kind of NAT (like nova-network multi=true) or
>>> `Floating IPs' within my Cloud Computing environment.
>>>
>>> Thanks!
>>> Thiago
>>>
>>
>>
>
Follow ups
References