openstack team mailing list archive
-
openstack team
-
Mailing list archive
-
Message #23265
Re: OpenStack Folsom Install - VM failed to configure network
Ok I found the issue:
I had the incorrect IP in the /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini file
local_ip was set to the VM IP instead of the local "data network" IP for the compute node. Now I need to figure out my next error: )
ci-info: eth0 : 1 50.50.1.3 255.255.255.0 fa:16:3e:4c:c1:34
ci-info: route-0: 0.0.0.0 50.50.1.1 0.0.0.0 eth0 UG
ci-info: route-1: 50.50.1.0 0.0.0.0 255.255.255.0 eth0 U
cloud-init start running: Fri, 03 May 2013 15:41:12 +0000. up 4.47 seconds
2013-05-03 15:41:15,645 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [2/120s]: url error [[Errno 113] No route to host]
2013-05-03 15:41:18,645 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [5/120s]: url error [[Errno 113] No route to host]
2013-05-03 15:41:21,645 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [8/120s]: url error [[Errno 113] No route to host]
Thanks,
-Farhan.
From: Farhan Patwa <Farhan.Patwa@xxxxxxxx<mailto:Farhan.Patwa@xxxxxxxx>>
Date: Friday, May 3, 2013 9:49 AM
To: Molnár Mihály László <lacikaaa@xxxxxxxxx<mailto:lacikaaa@xxxxxxxxx>>
Cc: "openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>" <openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>>
Subject: Re: [Openstack] OpenStack Folsom Install - VM failed to configure network
Hi Rusty,
The instructions list kvm and that is what I am using.
>From the compute node:
#######################################################
root@openstack-3:~# cat /etc/nova/nova-compute.conf
[DEFAULT]
libvirt_type=kvm
libvirt_ovs_bridge=br-int
libvirt_vif_type=ethernet
libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver
libvirt_use_virtio_for_bridges=True
#######################################################
Thanks,
-Farhan.
Farhan Patwa
Associate Director & Chief Architect
Institute for Cyber Security
University of Texas at San Antonio
Phone: (210) 458-7003
Email: farhan.patwa@xxxxxxxx<mailto:farhan.patwa@xxxxxxxx>
Website: http://ics.utsa.edu
From: Molnár Mihály László <lacikaaa@xxxxxxxxx<mailto:lacikaaa@xxxxxxxxx>>
Date: Friday, May 3, 2013 9:41 AM
To: Farhan Patwa <Farhan.Patwa@xxxxxxxx<mailto:Farhan.Patwa@xxxxxxxx>>
Cc: "openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>" <openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>>
Subject: Re: [Openstack] OpenStack Folsom Install - VM failed to configure network
do you use kvm or qemu?
Rusty
On Fri, May 3, 2013 at 4:34 PM, Farhan Patwa <Farhan.Patwa@xxxxxxxx<mailto:Farhan.Patwa@xxxxxxxx>> wrote:
I have looked through all the log files (/var/log/*) and the 1 error that
I do see is on the compute node from the file libvirtd.log:
2013-05-03 14:30:27.706+0000: 2474: error : virNWFilterDHCPSnoopEnd:2113 :
internal error ifname "vnet1" not in key map
2013-05-03 14:30:27.709+0000: 2474: error : virNetDevGetIndex:657 : Unable
to get index for interface vnet1: No such device
Can anyone point me in the right direction (or suggest some way of
debugging this)
Many Thanks,
-Farhan.
On 5/2/13 4:01 PM, "Farhan Patwa" <Farhan.Patwa@xxxxxxxx<mailto:Farhan.Patwa@xxxxxxxx>> wrote:
>Hi all,
>I followed the instructions for OpenStack Folsom install at
>http://docs.openstack.org/folsom/basic-install/content/basic-install_intro
>.
>html
>I am at the point where I am able to boot up a VM and I can see the IP
>assigned to it in the GUI and when I do nova list.
>Also I have assigned a floating IP to it using the quantum commands
>specified in the guide above.
>But when I boot the VM I get the logs below.
>The tap device is UP and I am able to ping the 3 servers on the management
>LAN and the 2 servers (network and compute) on their data network.
>I would really appreciate any help/pointers that anyone can provide.
>
>#################################################################
>cloud-init start-local running: Thu, 02 May 2013 20:10:55 +0000. up 3.74
>seconds
>
>no instance data found in start-local
>
>cloud-init-nonet waiting 120 seconds for a network device.
>
>cloud-init-nonet gave up waiting for a network device.
>
>ci-info: lo : 1 127.0.0.1 255.0.0.0 .
>
>ci-info: eth0 : 1 . . fa:16:3e:9e:88:7d
>
>route_info failed
>
> * Stopping Handle applying cloud-config[74G[ OK ]
>
>Waiting for network configuration...
>
>Waiting up to 60 more seconds for network configuration...
>
>Booting system without full network configuration...
>
> * Stopping Failsafe Boot Delay[74G[ OK ]
>
> * Starting System V initialisation compatibility[74G[ OK ]
>
>Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
>
> * Starting AppArmor profiles [80G
>[74G[ OK ]
>
>#################################################################
>
>Thanks,
>
>
>-Farhan Patwa.
>
>
>
>_______________________________________________
>Mailing list: https://launchpad.net/~openstack
>Post to : openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>
>Unsubscribe : https://launchpad.net/~openstack
>More help : https://help.launchpad.net/ListHelp
>
_______________________________________________
Mailing list: https://launchpad.net/~openstack
Post to : openstack@xxxxxxxxxxxxxxxxxxx<mailto:openstack@xxxxxxxxxxxxxxxxxxx>
Unsubscribe : https://launchpad.net/~openstack
More help : https://help.launchpad.net/ListHelp
References
