← Back to team overview

openstack team mailing list archive

Fwd: [Grizzly][Quantum] Floating IP is not reachable

 

Forwarding again with some hope for response :)

---------- Forwarded message ----------
From: Anil Vishnoi <vishnoianil@xxxxxxxxx>
Date: Thu, May 30, 2013 at 3:14 AM
Subject: [Grizzly][Quantum] Floating IP is not reachable
To: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>



Hi All,

I have a setup where controller/network node is running on one server and i
have another server as a compute node. I am able to launch the VM and VM
gets its private IP from its respective DHCP server as well. VM is
connected to its private network. Private network is attached to the router
and external network is set as a gateway for the router. I am able to
associate floating ip to the VM as well.

But when i ping this floating ip from internet, i am not able to ping.
Although i am able to ping the gateway ip of the router. I checked the ARP
entry for the floating ip, and its successfully resolving the arp for this
floating ip.

I can see this address in the router name space as well.

# ip netns exec qrouter-3d7dfce4-c19a-4448-b276-1631690a403c ip addr
14: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
15: qr-e018e6ed-37: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN
    link/ether fa:16:3e:f5:73:c5 brd ff:ff:ff:ff:ff:ff
    inet 1.1.1.1/24 brd 1.1.1.255 scope global qr-e018e6ed-37
    inet6 fe80::f816:3eff:fef5:73c5/64 scope link
       valid_lft forever preferred_lft forever
19: qg-d75a619f-ac: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN
    link/ether fa:16:3e:2e:c6:4b brd ff:ff:ff:ff:ff:ff
    inet 9.126.108.126/24 brd 9.126.108.255 scope global qg-d75a619f-ac
    inet 9.126.108.127/32 brd 9.126.108.127 scope global qg-d75a619f-ac  <<
    inet6 fe80::f816:3eff:fe2e:c64b/64 scope link
       valid_lft forever preferred_lft forever


So i can ping 9.126.108.126 but i am not able to ping 9.126.108.127. Also
both of these IP actually resolves to the same MAC address, is it expected
? I added rules in the default security group to allow TCP/UDP/ICMP traffic.

Please let me know if anybody has any clue on whats going on here , and how
can i further debug it. Please let me know if you need any other details.
-- 
Thanks
Anil



-- 
Thanks
Anil

Follow ups

References