registry team mailing list archive

[lotus49 <445852@xxxxxxxxxxxxxxxxxx>]

Trey's right, it never was fixed.

Although I have fortunately not suffered from any permanent hardware
problems, the bug resurfaces every now and then.  I have worked around it by
editing /lib/udev/rules.d/80-udisks.rules and commenting out this line:

# ATA disks driven by libata
#KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata",
ENV{DEVTYPE}=="disk", IMPORT{program}="udisks-probe-ata-smart $tempnode"

This workaround has done the trick but unfortunately, this is overwritten
every now and then (as it warns it will be at the beginning of the file).
At least it is easy to spot when this has happened as my boot times go from
about 15 secs to a couple of minutes.

Simon

On 4 October 2010 07:41, Trey <trey333@xxxxxxxxx> wrote:

> just to throw it out there - this bug was never "fixed." I had to sell a
> bricked EEE 900 for scrap because it killed both SSD's.
>
> On Mon, Oct 4, 2010 at 2:08 PM, rogmorri <445852@xxxxxxxxxxxxxxxxxx>
> wrote:
>
> > Thank, Andrew.  Maybe then I just have bad hardware.
> >
> > --
> > devkit-disks-probe-ata-smart causes HSM Violations on SSD, and potential
> > hardware death
> > https://bugs.launchpad.net/bugs/445852
> > You received this bug notification because you are a direct subscriber
> > of a duplicate bug (387272).
> >
> > Status in EasyPeasy Overview: Fix Released
> > Status in ATA S.M.A.R.T. Disk Health Monitoring Library: Confirmed
> > Status in The Linux Kernel: Invalid
> > Status in “devicekit-disks” package in Ubuntu: Invalid
> > Status in “libatasmart” package in Ubuntu: Fix Released
> > Status in “devicekit-disks” source package in Lucid: Invalid
> > Status in “libatasmart” source package in Lucid: Fix Released
> > Status in “devicekit-disks” source package in Karmic: Fix Released
> > Status in “libatasmart” source package in Karmic: Won't Fix
> > Status in “devicekit-disks” package in Fedora: New
> >
> > Bug description:
> > TEMPORARY WORK AROUND FOR THIS PROBLEM IN KARMIC: (This is now also in
> > karmic-proposed and needs testing feedback):
> >
> > 1. sudo gedit /lib/udev/rules.d/95-devkit-disks.rules
> >
> > 2. locate the following lines (about 1/3 the way into the file; search
> for
> > "smart")
> >
> > # ATA disks driven by libata
> > KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata",
> > ENV{DEVTYPE}=="disk", IMPORT{program}="devkit-disks-probe-ata-smart
> > $tempnode"
> >
> > 3. comment out the second line by adding a # in front, so you should have
> >
> > # ATA disks driven by libata
> > #KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata",
> > ENV{DEVTYPE}=="disk", IMPORT{program}="devkit-disks-probe-ata-smart
> > $tempnode"
> >
> > 4. save the file and reboot
> >
> > TECHNICAL ANALYSIS:
> >
> https://bugs.launchpad.net/ubuntu/karmic/+source/libatasmart/+bug/445852/comments/202
> > LUCID STATUS:
> >
> https://bugs.launchpad.net/ubuntu/karmic/+source/libatasmart/+bug/445852/comments/203
> > KARMIC SOLUTION:
> >
> https://bugs.launchpad.net/ubuntu/karmic/+source/libatasmart/+bug/445852/comments/204
> >
> > BUG DESCRIPTION FOLLOWS:
> >
> > In the Karmic beta I experience ssd stalls during the boot process.  It
> > happens almost everytime before xsplash loads and happens again
> frequently
> > between logging into gdm and the desktop loading.  When it happens during
> > login I think it is making gnome time out on loading panel items as I get
> > errors related to lots of panel items failing to load.  If I log out and
> > back in again when the ssd isn't stalled the panel items load fine.
> >
> > When it happens the following messages appear before xplash (or in dmesg
> > when it happens after gdm):
> >
> > ata2: lost interrupt (Status 0x58)
> > ata2: drained 16384 bytes to clear DRQ.
> > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> > ata2.00: BMDMA stat 0x4
> > ata2.00: cmd c8/00:40:cb:60:32/00:00:00:00:00/e0 tag 0 dma 32768 in
> > res 58/00:40:cb:60:32/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
> > ata2.00: status: { DRDY DRQ }
> > ata2: soft resetting link
> > ata2.00: configured for UDMA/66
> > ata2: EH complete
> >
> > I did not have this issue in jaunty with this hardware and I don't think
> it
> > has happened once the system is fully loaded.  I am running karmic unr on
> an
> > Acer Aspire One netbook.
> >
> > ProblemType: Bug
> > AplayDevices:
> >  **** List of PLAYBACK Hardware Devices ****
> >  card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
> >    Subdevices: 1/1
> >    Subdevice #0: subdevice #0
> > Architecture: i386
> > ArecordDevices:
> >  **** List of CAPTURE Hardware Devices ****
> >  card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
> >    Subdevices: 1/1
> >    Subdevice #0: subdevice #0
> > AudioDevicesInUse:
> >  USER        PID ACCESS COMMAND
> >  /dev/snd/controlC0:  luke       1990 F.... pulseaudio
> > CRDA: Error: [Errno 2] No such file or directory
> > Card0.Amixer.info:
> >  Card hw:0 'Intel'/'HDA Intel at 0x58540000 irq 16'
> >    Mixer name   : 'Realtek ALC268'
> >    Components   : 'HDA:10ec0268,1025015b,00100101'
> >    Controls      : 9
> >    Simple ctrls  : 6
> > CheckboxSubmission: 12ef539f3788bfbc46bc56b5c28128a6
> > CheckboxSystem: c69722ecac764861be52925fa50b4dcc
> > Date: Wed Oct  7 17:54:56 2009
> > DistroRelease: Ubuntu 9.10
> > HibernationDevice: RESUME=UUID=8d44b89b-2edb-4c02-a4be-94bd25b65081
> > MachineType: Acer AOA110
> > Package: linux-image-2.6.31-12-generic 2.6.31-12.40
> > ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-12-generic
> > root=UUID=039a096e-3486-4898-9eeb-44a705f8b7fd ro quiet splash
> elevator=noop
> > usbcore.autosuspend=1
> > ProcEnviron:
> >  LANG=en_CA.UTF-8
> >  SHELL=/bin/bash
> > ProcVersionSignature: Ubuntu 2.6.31-12.40-generic
> > RelatedPackageVersions: linux-firmware 1.21
> > RfKill:
> >  0: phy0: Wireless LAN
> >   Soft blocked: no
> >   Hard blocked: no
> > SourcePackage: linux
> > Tags:  ubuntu-unr
> > Uname: Linux 2.6.31-12-generic i686
> > XsessionErrors:
> >  (gnome-settings-daemon:2006): GLib-CRITICAL **: g_propagate_error:
> > assertion `src != NULL' failed
> >  (gnome-settings-daemon:2006): GLib-CRITICAL **: g_propagate_error:
> > assertion `src != NULL' failed
> >  (nautilus:2092): Eel-CRITICAL **: eel_preferences_get_boolean: assertion
> > `preferences_is_initialized ()' failed
> >  (polkit-gnome-authentication-agent-1:2118): GLib-CRITICAL **:
> > g_once_init_leave: assertion `initialization_value != 0' failed
> >  (gnome-panel:2048): Gdk-WARNING **:
> > /build/buildd/gtk+2.0-2.18.2/gdk/x11/gdkdrawable-x11.c:952 drawable is
> not a
> > pixmap or window
> > dmi.bios.date: 10/06/2008
> > dmi.bios.vendor: Acer
> > dmi.bios.version: v0.3309
> > dmi.board.asset.tag: Base Board Asset Tag
> > dmi.board.vendor: Acer
> > dmi.board.version: Base Board Version
> > dmi.chassis.type: 1
> > dmi.chassis.vendor: Chassis Manufacturer
> > dmi.chassis.version: Chassis Version
> > dmi.modalias:
> >
> dmi:bvnAcer:bvrv0.3309:bd10/06/2008:svnAcer:pnAOA110:pvr1:rvnAcer:rn:rvrBaseBoardVersion:cvnChassisManufacturer:ct1:cvrChassisVersion:
> > dmi.product.name: AOA110
> > dmi.product.version: 1
> > dmi.sys.vendor: Acer
> >
> >
> >
> > To unsubscribe from this bug, go to:
> > https://bugs.launchpad.net/easypeasy-project/+bug/445852/+subscribe
> >
>
> --
> devkit-disks-probe-ata-smart causes HSM Violations on SSD, and potential
> hardware death
> https://bugs.launchpad.net/bugs/445852
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in EasyPeasy Overview: Fix Released
> Status in ATA S.M.A.R.T. Disk Health Monitoring Library: Confirmed
> Status in The Linux Kernel: Invalid
> Status in “devicekit-disks” package in Ubuntu: Invalid
> Status in “libatasmart” package in Ubuntu: Fix Released
> Status in “devicekit-disks” source package in Lucid: Invalid
> Status in “libatasmart” source package in Lucid: Fix Released
> Status in “devicekit-disks” source package in Karmic: Fix Released
> Status in “libatasmart” source package in Karmic: Won't Fix
> Status in “devicekit-disks” package in Fedora: New
>
> Bug description:
> TEMPORARY WORK AROUND FOR THIS PROBLEM IN KARMIC: (This is now also in
> karmic-proposed and needs testing feedback):
>
> 1. sudo gedit /lib/udev/rules.d/95-devkit-disks.rules
>
> 2. locate the following lines (about 1/3 the way into the file; search for
> "smart")
>
> # ATA disks driven by libata
> KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata",
> ENV{DEVTYPE}=="disk", IMPORT{program}="devkit-disks-probe-ata-smart
> $tempnode"
>
> 3. comment out the second line by adding a # in front, so you should have
>
> # ATA disks driven by libata
> #KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata",
> ENV{DEVTYPE}=="disk", IMPORT{program}="devkit-disks-probe-ata-smart
> $tempnode"
>
> 4. save the file and reboot
>
> TECHNICAL ANALYSIS:
> https://bugs.launchpad.net/ubuntu/karmic/+source/libatasmart/+bug/445852/comments/202
> LUCID STATUS:
> https://bugs.launchpad.net/ubuntu/karmic/+source/libatasmart/+bug/445852/comments/203
> KARMIC SOLUTION:
> https://bugs.launchpad.net/ubuntu/karmic/+source/libatasmart/+bug/445852/comments/204
>
> BUG DESCRIPTION FOLLOWS:
>
> In the Karmic beta I experience ssd stalls during the boot process.  It
> happens almost everytime before xsplash loads and happens again frequently
> between logging into gdm and the desktop loading.  When it happens during
> login I think it is making gnome time out on loading panel items as I get
> errors related to lots of panel items failing to load.  If I log out and
> back in again when the ssd isn't stalled the panel items load fine.
>
> When it happens the following messages appear before xplash (or in dmesg
> when it happens after gdm):
>
> ata2: lost interrupt (Status 0x58)
> ata2: drained 16384 bytes to clear DRQ.
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata2.00: BMDMA stat 0x4
> ata2.00: cmd c8/00:40:cb:60:32/00:00:00:00:00/e0 tag 0 dma 32768 in
> res 58/00:40:cb:60:32/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
> ata2.00: status: { DRDY DRQ }
> ata2: soft resetting link
> ata2.00: configured for UDMA/66
> ata2: EH complete
>
> I did not have this issue in jaunty with this hardware and I don't think it
> has happened once the system is fully loaded.  I am running karmic unr on an
> Acer Aspire One netbook.
>
> ProblemType: Bug
> AplayDevices:
>  **** List of PLAYBACK Hardware Devices ****
>  card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
>    Subdevices: 1/1
>    Subdevice #0: subdevice #0
> Architecture: i386
> ArecordDevices:
>  **** List of CAPTURE Hardware Devices ****
>  card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
>    Subdevices: 1/1
>    Subdevice #0: subdevice #0
> AudioDevicesInUse:
>  USER        PID ACCESS COMMAND
>  /dev/snd/controlC0:  luke       1990 F.... pulseaudio
> CRDA: Error: [Errno 2] No such file or directory
> Card0.Amixer.info:
>  Card hw:0 'Intel'/'HDA Intel at 0x58540000 irq 16'
>    Mixer name   : 'Realtek ALC268'
>    Components   : 'HDA:10ec0268,1025015b,00100101'
>    Controls      : 9
>    Simple ctrls  : 6
> CheckboxSubmission: 12ef539f3788bfbc46bc56b5c28128a6
> CheckboxSystem: c69722ecac764861be52925fa50b4dcc
> Date: Wed Oct  7 17:54:56 2009
> DistroRelease: Ubuntu 9.10
> HibernationDevice: RESUME=UUID=8d44b89b-2edb-4c02-a4be-94bd25b65081
> MachineType: Acer AOA110
> Package: linux-image-2.6.31-12-generic 2.6.31-12.40
> ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-12-generic
> root=UUID=039a096e-3486-4898-9eeb-44a705f8b7fd ro quiet splash elevator=noop
> usbcore.autosuspend=1
> ProcEnviron:
>  LANG=en_CA.UTF-8
>  SHELL=/bin/bash
> ProcVersionSignature: Ubuntu 2.6.31-12.40-generic
> RelatedPackageVersions: linux-firmware 1.21
> RfKill:
>  0: phy0: Wireless LAN
>   Soft blocked: no
>   Hard blocked: no
> SourcePackage: linux
> Tags:  ubuntu-unr
> Uname: Linux 2.6.31-12-generic i686
> XsessionErrors:
>  (gnome-settings-daemon:2006): GLib-CRITICAL **: g_propagate_error:
> assertion `src != NULL' failed
>  (gnome-settings-daemon:2006): GLib-CRITICAL **: g_propagate_error:
> assertion `src != NULL' failed
>  (nautilus:2092): Eel-CRITICAL **: eel_preferences_get_boolean: assertion
> `preferences_is_initialized ()' failed
>  (polkit-gnome-authentication-agent-1:2118): GLib-CRITICAL **:
> g_once_init_leave: assertion `initialization_value != 0' failed
>  (gnome-panel:2048): Gdk-WARNING **:
> /build/buildd/gtk+2.0-2.18.2/gdk/x11/gdkdrawable-x11.c:952 drawable is not a
> pixmap or window
> dmi.bios.date: 10/06/2008
> dmi.bios.vendor: Acer
> dmi.bios.version: v0.3309
> dmi.board.asset.tag: Base Board Asset Tag
> dmi.board.vendor: Acer
> dmi.board.version: Base Board Version
> dmi.chassis.type: 1
> dmi.chassis.vendor: Chassis Manufacturer
> dmi.chassis.version: Chassis Version
> dmi.modalias:
> dmi:bvnAcer:bvrv0.3309:bd10/06/2008:svnAcer:pnAOA110:pvr1:rvnAcer:rn:rvrBaseBoardVersion:cvnChassisManufacturer:ct1:cvrChassisVersion:
> dmi.product.name: AOA110
> dmi.product.version: 1
> dmi.sys.vendor: Acer
>
>
>
> To unsubscribe from this bug, go to:
> https://bugs.launchpad.net/easypeasy-project/+bug/445852/+subscribe
>

-- 
devkit-disks-probe-ata-smart causes HSM Violations on SSD, and potential hardware death
https://bugs.launchpad.net/bugs/445852
You received this bug notification because you are a member of Registry
Administrators, which is the registrant for Fedora.