sikuli-driver team mailing list archive

[RaiMan <rmhdevelop@xxxxxx>]

thanks.
I will setup a script that uses Safari and a webpage.
Might be more universal.

Do you use the Mail app from Apple?

Raimund

> On 18 Mar 2015, at 22:47, Benjamin Lok <lok@xxxxxxxxxxxxxxxx> wrote:
> 
> if there are any scripts you want me to try to run on my side and give
> you and debug output, please let me know.  i’m happy to help.
> 
> Benjamin Lok, Ph.D.
> Co-Founder and Product Manager
> Shadow Health, Inc.
> lok@xxxxxxxxxxxxxxxx
> 
> Professor and Director of the Digital Arts and Sciences Program
> Computer and Information Sciences and Engineering Department
> University of Florida
> 
>> On Mar 18, 2015, at 7:16 AM, RaiMan <rmhdevelop@xxxxxx> wrote:
>> 
>> ** Description changed:
>> 
>> + ******** did some testing with
>> + Mac OS X 10.10.2 
>> + Java 1.8.0_20 (64-Bit)
>> + SikuliX version 1.1.0 (build 201503181055)
>> + 
>> + The script (run from the IDE) has a loop, where a new Mail is opened,
>> + some clicks and types are done and the mail is closed with do-not-save.
>> + 
>> + The 50 loop-turns ran with constant speed to the end.
>> + I could not see any slowdown effects here.
>> + 
>> + with this script
>> + -------
>> + switchApp("Mail")
>> + newMail = "newMail.png"
>> + anhang = "anhang.png"
>> + nosave = "nosave.png"
>> + for i in range(50):
>> +   start = time.time()
>> +   click(newMail)
>> +   win = App.focusedWindow()
>> +   win.highlight(1)
>> +   win.click(anhang)
>> +   wait(2) 
>> +   type(Key.ESC)
>> +   ref = win.getLastMatch()
>> +   an = ref.offset(50,35)
>> +   betreff = an.offset(0, 70)
>> +   memo = an.offset(0, 150)
>> +   click(an)
>> +   type("a", Key.CMD); type(Key.BACKSPACE)
>> +   type("rhock"); wait(1); type(Key.ENTER)
>> +   click(betreff)
>> +   type("a", Key.CMD); type(Key.BACKSPACE)
>> +   type("this is some test"); wait(1)
>> +   click(memo)
>> +   type("a", Key.CMD); type(Key.BACKSPACE)
>> +   type("this is some test\n");
>> +   type("this is some test\n");
>> +   type("this is some test\n");
>> +   type("this is some test\n");
>> +   wait(2)
>> +   type("w", Key.CMD)
>> +   win.click(nosave)
>> +   wait(2)
>> +   print int(time.time()-start)
>> + -------
>> + 
>> Using os x 10.10.2, and sikuli 1.1.0 build.  I'm pretty new to sikuli,
>> but have created about a 70 line script.  basic stuff, click on this
>> button, type a short command, etc.   however about 40-50 instructions in
>> (not always at the same spot), performance *suddenly* slows to a crawl
>> where each instruction can take almost 15 seconds to execute.  i
>> searched around and couldn't come up w/ anything.  thoughts?
>> 
>> ** Description changed:
>> 
>> ******** did some testing with
>> - Mac OS X 10.10.2 
>> + Mac OS X 10.10.2
>> Java 1.8.0_20 (64-Bit)
>> SikuliX version 1.1.0 (build 201503181055)
>> 
>> The script (run from the IDE) has a loop, where a new Mail is opened,
>> some clicks and types are done and the mail is closed with do-not-save.
>> 
>> The 50 loop-turns ran with constant speed to the end.
>> + (elapsed time about 15 minutes)
>> I could not see any slowdown effects here.
>> 
>> with this script
>> -------
>> switchApp("Mail")
>> newMail = "newMail.png"
>> anhang = "anhang.png"
>> nosave = "nosave.png"
>> for i in range(50):
>> -   start = time.time()
>> -   click(newMail)
>> -   win = App.focusedWindow()
>> -   win.highlight(1)
>> -   win.click(anhang)
>> -   wait(2) 
>> -   type(Key.ESC)
>> -   ref = win.getLastMatch()
>> -   an = ref.offset(50,35)
>> -   betreff = an.offset(0, 70)
>> -   memo = an.offset(0, 150)
>> -   click(an)
>> -   type("a", Key.CMD); type(Key.BACKSPACE)
>> -   type("rhock"); wait(1); type(Key.ENTER)
>> -   click(betreff)
>> -   type("a", Key.CMD); type(Key.BACKSPACE)
>> -   type("this is some test"); wait(1)
>> -   click(memo)
>> -   type("a", Key.CMD); type(Key.BACKSPACE)
>> -   type("this is some test\n");
>> -   type("this is some test\n");
>> -   type("this is some test\n");
>> -   type("this is some test\n");
>> -   wait(2)
>> -   type("w", Key.CMD)
>> -   win.click(nosave)
>> -   wait(2)
>> -   print int(time.time()-start)
>> +   start = time.time()
>> +   click(newMail)
>> +   win = App.focusedWindow()
>> +   win.highlight(1)
>> +   win.click(anhang)
>> +   wait(2)
>> +   type(Key.ESC)
>> +   ref = win.getLastMatch()
>> +   an = ref.offset(50,35)
>> +   betreff = an.offset(0, 70)
>> +   memo = an.offset(0, 150)
>> +   click(an)
>> +   type("a", Key.CMD); type(Key.BACKSPACE)
>> +   type("rhock"); wait(1); type(Key.ENTER)
>> +   click(betreff)
>> +   type("a", Key.CMD); type(Key.BACKSPACE)
>> +   type("this is some test"); wait(1)
>> +   click(memo)
>> +   type("a", Key.CMD); type(Key.BACKSPACE)
>> +   type("this is some test\n");
>> +   type("this is some test\n");
>> +   type("this is some test\n");
>> +   type("this is some test\n");
>> +   wait(2)
>> +   type("w", Key.CMD)
>> +   win.click(nosave)
>> +   wait(2)
>> +   print int(time.time()-start)
>> -------
>> 
>> Using os x 10.10.2, and sikuli 1.1.0 build.  I'm pretty new to sikuli,
>> but have created about a 70 line script.  basic stuff, click on this
>> button, type a short command, etc.   however about 40-50 instructions in
>> (not always at the same spot), performance *suddenly* slows to a crawl
>> where each instruction can take almost 15 seconds to execute.  i
>> searched around and couldn't come up w/ anything.  thoughts?
>> 
>> -- 
>> You received this bug notification because you are subscribed to the bug
>> report.
>> https://bugs.launchpad.net/bugs/1433454
>> 
>> Title:
>> [1.1.0] Mac OS X 10.10: Scripts slowing down click/type after some
>> rather short runtime
>> 
>> Status in Sikuli:
>> In Progress
>> 
>> Bug description:
>> ******** did some testing with
>> Mac OS X 10.10.2
>> Java 1.8.0_20 (64-Bit)
>> SikuliX version 1.1.0 (build 201503181055)
>> 
>> The script (run from the IDE) has a loop, where a new Mail is opened,
>> some clicks and types are done and the mail is closed with do-not-
>> save.
>> 
>> The 50 loop-turns ran with constant speed to the end.
>> (elapsed time about 15 minutes)
>> I could not see any slowdown effects here.
>> 
>> with this script
>> -------
>> switchApp("Mail")
>> newMail = "newMail.png"
>> anhang = "anhang.png"
>> nosave = "nosave.png"
>> for i in range(50):
>>   start = time.time()
>>   click(newMail)
>>   win = App.focusedWindow()
>>   win.highlight(1)
>>   win.click(anhang)
>>   wait(2)
>>   type(Key.ESC)
>>   ref = win.getLastMatch()
>>   an = ref.offset(50,35)
>>   betreff = an.offset(0, 70)
>>   memo = an.offset(0, 150)
>>   click(an)
>>   type("a", Key.CMD); type(Key.BACKSPACE)
>>   type("rhock"); wait(1); type(Key.ENTER)
>>   click(betreff)
>>   type("a", Key.CMD); type(Key.BACKSPACE)
>>   type("this is some test"); wait(1)
>>   click(memo)
>>   type("a", Key.CMD); type(Key.BACKSPACE)
>>   type("this is some test\n");
>>   type("this is some test\n");
>>   type("this is some test\n");
>>   type("this is some test\n");
>>   wait(2)
>>   type("w", Key.CMD)
>>   win.click(nosave)
>>   wait(2)
>>   print int(time.time()-start)
>> -------
>> 
>> Using os x 10.10.2, and sikuli 1.1.0 build.  I'm pretty new to sikuli,
>> but have created about a 70 line script.  basic stuff, click on this
>> button, type a short command, etc.   however about 40-50 instructions
>> in (not always at the same spot), performance *suddenly* slows to a
>> crawl where each instruction can take almost 15 seconds to execute.  i
>> searched around and couldn't come up w/ anything.  thoughts?
>> 
>> To manage notifications about this bug go to:
>> https://bugs.launchpad.net/sikuli/+bug/1433454/+subscriptions
> 
> -- 
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1433454
> 
> Title:
>  [1.1.0] Mac OS X 10.10: Scripts slowing down click/type after some
>  rather short runtime
> 
> Status in Sikuli:
>  In Progress
> 
> Bug description:
>  ******** did some testing with
>  Mac OS X 10.10.2
>  Java 1.8.0_20 (64-Bit)
>  SikuliX version 1.1.0 (build 201503181055)
> 
>  The script (run from the IDE) has a loop, where a new Mail is opened,
>  some clicks and types are done and the mail is closed with do-not-
>  save.
> 
>  The 50 loop-turns ran with constant speed to the end.
>  (elapsed time about 15 minutes)
>  I could not see any slowdown effects here.
> 
>  with this script
>  -------
>  switchApp("Mail")
>  newMail = "newMail.png"
>  anhang = "anhang.png"
>  nosave = "nosave.png"
>  for i in range(50):
>    start = time.time()
>    click(newMail)
>    win = App.focusedWindow()
>    win.highlight(1)
>    win.click(anhang)
>    wait(2)
>    type(Key.ESC)
>    ref = win.getLastMatch()
>    an = ref.offset(50,35)
>    betreff = an.offset(0, 70)
>    memo = an.offset(0, 150)
>    click(an)
>    type("a", Key.CMD); type(Key.BACKSPACE)
>    type("rhock"); wait(1); type(Key.ENTER)
>    click(betreff)
>    type("a", Key.CMD); type(Key.BACKSPACE)
>    type("this is some test"); wait(1)
>    click(memo)
>    type("a", Key.CMD); type(Key.BACKSPACE)
>    type("this is some test\n");
>    type("this is some test\n");
>    type("this is some test\n");
>    type("this is some test\n");
>    wait(2)
>    type("w", Key.CMD)
>    win.click(nosave)
>    wait(2)
>    print int(time.time()-start)
>  -------
> 
>  Using os x 10.10.2, and sikuli 1.1.0 build.  I'm pretty new to sikuli,
>  but have created about a 70 line script.  basic stuff, click on this
>  button, type a short command, etc.   however about 40-50 instructions
>  in (not always at the same spot), performance *suddenly* slows to a
>  crawl where each instruction can take almost 15 seconds to execute.  i
>  searched around and couldn't come up w/ anything.  thoughts?
> 
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/sikuli/+bug/1433454/+subscriptions

-- 
You received this bug notification because you are a member of Sikuli
Drivers, which is subscribed to Sikuli.
https://bugs.launchpad.net/bugs/1433454

Title:
  [1.1.0] Mac OS X 10.10: Scripts slowing down click/type after some
  rather short runtime

Status in Sikuli:
  In Progress

Bug description:
  ******** did some testing with
  Mac OS X 10.10.2
  Java 1.8.0_20 (64-Bit)
  SikuliX version 1.1.0 (build 201503181055)

  The script (run from the IDE) has a loop, where a new Mail is opened,
  some clicks and types are done and the mail is closed with do-not-
  save.

  The 50 loop-turns ran with constant speed to the end.
  (elapsed time about 15 minutes)
  I could not see any slowdown effects here.

  with this script
  -------
  switchApp("Mail")
  newMail = "newMail.png"
  anhang = "anhang.png"
  nosave = "nosave.png"
  for i in range(50):
    start = time.time()
    click(newMail)
    win = App.focusedWindow()
    win.highlight(1)
    win.click(anhang)
    wait(2)
    type(Key.ESC)
    ref = win.getLastMatch()
    an = ref.offset(50,35)
    betreff = an.offset(0, 70)
    memo = an.offset(0, 150)
    click(an)
    type("a", Key.CMD); type(Key.BACKSPACE)
    type("rhock"); wait(1); type(Key.ENTER)
    click(betreff)
    type("a", Key.CMD); type(Key.BACKSPACE)
    type("this is some test"); wait(1)
    click(memo)
    type("a", Key.CMD); type(Key.BACKSPACE)
    type("this is some test\n");
    type("this is some test\n");
    type("this is some test\n");
    type("this is some test\n");
    wait(2)
    type("w", Key.CMD)
    win.click(nosave)
    wait(2)
    print int(time.time()-start)
  -------

  Using os x 10.10.2, and sikuli 1.1.0 build.  I'm pretty new to sikuli,
  but have created about a 70 line script.  basic stuff, click on this
  button, type a short command, etc.   however about 40-50 instructions
  in (not always at the same spot), performance *suddenly* slows to a
  crawl where each instruction can take almost 15 seconds to execute.  i
  searched around and couldn't come up w/ anything.  thoughts?

To manage notifications about this bug go to:
https://bugs.launchpad.net/sikuli/+bug/1433454/+subscriptions