sony-vaio-z-series team mailing list archive
-
sony-vaio-z-series team
-
Mailing list archive
-
Message #02140
Re: Benchmarlk Ricoh SSD in a Raid 0 array
Hi,
I've a VPCZ12M9E with 2 SSD in raid0, I'm also using encrypted lvm on top.
I don't remember what these SSD are.
$ sudo hdparm -tT /dev/mapper/panic-root
/dev/mapper/panic-root:
Timing cached reads: 6048 MB in 2.00 seconds = 3024.36 MB/sec
Timing buffered disk reads: 894 MB in 3.01 seconds = 297.39 MB/sec
$ dd if=/dev/zero of=/tmp/output.img bs=16k count=256k
262144+0 records in
262144+0 records out
4294967296 bytes (4,3 GB) copied, 20,0337 s, 214 MB/s
Note that I'm not using any optimization for SSD (such as mounting / with
noatime and using more appropriate kernel scheduler)
Didier
On Sun, 22 May 2011 22:20:44 +0200, darwish@xxxxxxxxx wrote:
> Hi people.
>
> I ran a little test to know about the performances of the Ricoh SSD
drive
> (of the VAIO Z13) on a Raido0 array.
>
> Mine has two SSD of 64GB.
>
> A little benchmark with hdparm
>
> for i in 1 2 3; do hdparm -tT /dev/hda; done
>
> and one other with dd for write test :
>
> dd if=/dev/zero of=/tmp/output.img bs=16k count=256k
>
> tell us the I/O are performing at approx. 245MB/s read and 340 MB/s
write
>
> Thisis a very minimal test that should be extented further by varrying
> file and block size.
>
> It would be very intersting to know the performances of other
> configurations (raid0 array of 4 drives and without raid)
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~sony-vaio-z-series
> Post to : sony-vaio-z-series@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~sony-vaio-z-series
> More help : https://help.launchpad.net/ListHelp
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
References