sslug-teknik team mailing list archive

[Johan Kjellman <johan.kjellman@xxxxxxx>]

Tackar för tipset! Nu funkar allt som det ska!



Johan Kjellman



>I /usr/src/linux/Documentation/networking/net-modules.txt er der
>faktisk et eksempel til lige netop dette kort .
>Obs. anvend modprobe i stedet for insmod !
>
>2) i /etc/conf.modules kan disse parametre angives:
>
>  options 3c503 io=0x300,0x250 ......
>
>3) IRQ kan også angives ved f.eks. at tilføje irq=9,11
>   hvios auto detect ikke virker.
>
>..........
>
>        8390 based Network Modules              (Paul Gortmaker, Nov 12, 1995)
>        --------------------------
>
>(Includes: smc-ultra, ne, wd, 3c503, hp, hp-plus, e2100 and ac3200)
>
>The 8390 series of network drivers now support multiple card systems without
>reloading the same module multiple times (memory efficient!) This is done by
>specifying multiple comma separated values, such as:
>
>        insmod 3c503.o io=0x280,0x300,0x330,0x350  xcvr=0,1,0,1
>
>The above would have the one module controlling four 3c503 cards, with card 2
>and 4 using external transceivers. The "insmod" manual describes the usage
>of comma separated value lists.
>
>It is *STRONGLY RECOMMENDED* that you supply "io=" instead of autoprobing.
>If an "io=" argument is not supplied, then the ISA drivers will complain
>about autoprobing being not recommended, and begrudgingly autoprobe for
>a *SINGLE CARD ONLY* -- if you want to use multiple cards you *have* to
>supply an "io=0xNNN,0xQQQ,..." argument.
>
>..........
>
>
>--
>mvh Frank Damgaard  frda@xxxxxxxxxxxxx | frank@xxxxxxxx |fido  2:236/15.2