sslug-teknik team mailing list archive

Thread
Date

Sv: Mounting af disk! - start-up logs!

To: <sslug-teknik@xxxxxxxx>
From: "Henning Kristensen" <Henning1@xxxxxxxx>
Date: Thu, 15 Apr 1999 14:43:52 +0200
Delivered-to: mailing list sslug-teknik@xxxxxxxx
Mailing-list: contact sslug-teknik-help@xxxxxxxx; run by ezmlm
Reply-to: sslug-teknik@xxxxxxxx

Okay, her er lidt mere info, der måske kan give nogle, med bedre viden om linux end mig, en ide om hvor det går galt...
Jeg har prøvet både at kopiere det boot-image (vmlinuz-2.0.36-0.7) der bliver lagt ind under installationen og det tilsvarende fra den boot-floppy'en, RH5.2 tilbyder at lave, ind til LoadLin (og selvfølgelig omdøbt tilsvarende)
(da det tilsyneladende ikke kan lade sig gøre at installere LILO i min specifikke com./hardware config.)

Anyway, jeg har vedlagt to txt filer med opstarten fra hhv. floppy og HD (loadlin)...

mvh.
Henning

Memory: sized by int13 0e801h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f9ce0
pcibios_init : BIOS32 Service Directory entry at 0xf0550
pcibios_init : PCI BIOS revision 2.10 entry at 0xf0750
Probing PCI hardware.
Calibrating delay loop.. ok - 299.83 BogoMIPS
Memory: 127508k/131008k available (748k kernel code, 384k reserved, 2160k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.36 (root@xxxxxxxxxxxxxxxx) (gcc version 2.7.2.3) #1 Tue Oct 13 22:17:11 EDT 1998
Starting kswapd v 1.4.2.2 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.09
Ramdisk driver initialized : 16 ramdisks of 4096K size
ide: i82371 PIIX (Triton) on PCI bus 0 function 33
    ide0: BM-DMA at 0xd800-0xd807
    ide1: BM-DMA at 0xd808-0xd80f
hdb: Maxtor 87000D8, 6679MB w/256kB Cache, CHS=20510/81/228, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hdb: [PTBL] [851/255/63] hdb1 hdb2 < hdb5 hdb6 >
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.2/3.2.4
       <Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
  Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
  Vendor: PLEXTOR   Model: CD-R   PX-R820T   Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
  Vendor: IBM       Model: DDRS-34560D       Rev: DC1B
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
(scsi0:0:6:0) Synchronous at 80.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
 sda: sda1
VFS: Mounted root (ext2 filesystem) readonly.
Trying to unmount old root ... okay
Adding Swap: 48156k swap-space (priority -1)
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035

Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f9ce0
pcibios_init : BIOS32 Service Directory entry at 0xf0550
pcibios_init : PCI BIOS revision 2.10 entry at 0xf0750
Probing PCI hardware.
Calibrating delay loop.. ok - 299.83 BogoMIPS
Memory: 64088k/66496k available (748k kernel code, 384k reserved, 1276k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.36 (root@xxxxxxxxxxxxxxxx) (gcc version 2.7.2.3) #1 Tue Oct 13 22:17:11 EDT 1998
Starting kswapd v 1.4.2.2 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.09
Ramdisk driver initialized : 16 ramdisks of 4096K size
ide: i82371 PIIX (Triton) on PCI bus 0 function 33
    ide0: BM-DMA at 0xd800-0xd807
    ide1: BM-DMA at 0xd808-0xd80f
hdb: Maxtor 87000D8, 6679MB w/256kB Cache, CHS=20510/81/228, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hdb: [PTBL] [851/255/63] hdb1 hdb2 < hdb5 hdb6 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 48156k swap-space (priority -1)
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035
VFS: Disk change detected on device 02:00