sslug-teknik team mailing list archive

["Jacob Sidenius" <jacob@xxxxxxxxxxxx>]

>Hvad siger X serveren om pennen når den starter?:
>X -probeonly 2>logfil
>cat logfil

<snip>
(**) module xf86Wacom.so successfully loaded from /usr/X11R6/lib/modules
</snip>
<Snip>
(**) mouse: type: IMPS/2, device: /dev/mouse, buttons 5
(**) mouse: zaxismapping: (-)4 (+)5
(**) Wacom port is /dev/ttyS0
(**) Wacom X devicename is Wacom
(**) Wacom suppress value is 6
(**) Wacom X devicename is WacomCore
(**) Wacom device always stays core pointer
(**) Wacom suppress value is 6
(**) Wacom X devicename is Eraser
(**) Wacom suppress value is 6
(**) Wacom X devicename is EraserCore
(**) Wacom device always stays core pointer
(**) Wacom suppress value is 6
</snip>

Ovenstående er resultatet med brug af følgende "Xinput section":
- Hvad betyder "Suppress 6" iøvrigt?

Section "Xinput"
    Subsection "WacomStylus"
         Port "/dev/ttyS0"
         Devicename "Wacom"
         Mode Absolute
         Suppress 6
    EndSubSection
    Subsection "WacomStylus"
         Port "/dev/ttyS0"
         Devicename "WacomCore"
         Mode Absolute
         AlwaysCore
         Suppress 6
    EndSubSection
    Subsection "WacomEraser"
         Port "/dev/ttyS0"
         Devicename "Eraser"
         Mode Absolute
         Suppress 6
    EndSubSection
    Subsection "WacomEraser"
         Port "/dev/ttyS0"
         DeviceName "EraserCore"
         Mode Absolute
         AlwaysCore
         Suppress 6
    EndSubSection
EndSection


-----Original Message-----
From: torben fjerdingstad <tfj@xxxxxxxxxxxxxxx>
To: Jacob Sidenius <jacob@xxxxxxxxxxxx>
Date: Tuesday, June 15, 1999 6:55 AM
Subject: Re: [TEKNIK] Wacom PenPartner


>On Mon, Jun 14, 1999 at 11:08:41PM +0200, Jacob Sidenius wrote:
>>
>> Det går ikke for godt med at få pennen til at virke :-(
>> Jeg har prøvet de fåreslåede ændriger* i XF86Config.
>> Men det er lige som om der magler en eller anden lille detalie et eller
>> andet, andet sted - en eller anden lille selvfølgelighed som gud og hver
man
>> kender. Noget man altid skal ændre/gøre/køre, også når man vil ændre sin
ps2
>> mus til en seriel mus (altså foruden div. ændriger af/i XF86Confg,
>> etc/sysconfig/mouse og dev/mouse).
>
>Hvad siger X serveren om pennen når den starter?:
>X -probeonly 2>logfil
>cat logfil
>
>>
>> -----Original Message-----
>> From: torben fjerdingstad <tfj@xxxxxxxxxxxxxxx>
>> To: jacob@xxxxxxxxxxxx <jacob@xxxxxxxxxxxx>
>> Date: Thursday, June 10, 1999 9:42 AM
>> Subject: Re: [TEKNIK] Wacom PenPartner
>>
>>
>> >Hej Jacob,
>> >
>> >Den XF86Config som jeg havde til at virke (dog ikke med
>> >viskelæderet), er vedlagt.
>> >
>> >Held og lykke med det.
>> >
>> >--
>> >torben fjerdingstad        | linux-2.2.9-smp/GNU/gnome-1.0
>> >tfj@xxxxxxxxxxxxxxx        | Show me your unix,
>> >http://www.fjerdingstad.dk |   and I know who you are.
>>
>>
>
>--
>torben fjerdingstad        | linux-2.2.9-ac6-smp/GNU/gnome-1.0
>tfj@xxxxxxxxxxxxxxx        | Show me your unix,
>http://www.fjerdingstad.dk |   and I know who you are.