sslug-teknik team mailing list archive

["John Poulsen" <jvp@xxxxxx>]

Tak kim for for meddelelsen vedrørende atttachments.

Her er den fulde beskrivelse af min dmesg:

______________________________________________________

Linux version 2.2.10 (root@Asterix) (gcc version 2.7.2.3) #1 SMP Tue
Jun 22 10:37:14 CEST 1999
mapped APIC to ffffe000 (002ed000)
mapped IOAPIC to ffffd000 (002ee000)
Detected 300688297 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 599.65 BogoMIPS
Memory: 127336k/131008k available (1472k kernel code, 420k reserved,
1712k data, 68k init)
Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
per-CPU timeslice cutoff: 1.56 usecs.
CPU0: AMD AMD-K6(tm) 3D processor stepping 00
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xf0560
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Initializing RT netlink socket
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven
operation.
parport0: Printer, HEWLETT-PACKARD DESKJET 880C
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
es1370: version v0.22 time 10:39:09 Jun 22 1999
es1370: found adapter at io 0xd800 irq 3
es1370: features: joystick on, line in, mic impedance 0
ISDN subsystem Rev: 1.55/1.47/1.55/1.33/none/1.2
loop: registered device at major 7
PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9,
DID=5229
PCI_IDE: not 100% native mode: will probe irqs later
PCI_IDE: simplex device:  DMA disabled
ide0: PCI_IDE Bus-Master DMA disabled (BIOS)
PCI_IDE: simplex device:  DMA disabled
ide1: PCI_IDE Bus-Master DMA disabled (BIOS)
hda: IBM-DTTA-351010, ATA DISK drive
hdb: IBM-DTTA-351010, ATA DISK drive
hdd: IBM-DTTA-350640, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTTA-351010, 9671MB w/466kB Cache, CHS=1232/255/63
hdb: IBM-DTTA-351010, 9671MB w/466kB Cache, CHS=1232/255/63
hdd: IBM-DTTA-350640, 6197MB w/468kB Cache, CHS=13431/15/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
sym53c8xx: at PCI bus 0, device 12, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c876 detected with Symbios NVRAM
sym53c876-0: rev=0x26, base=0xdd800000, io_port=0xd000, irq=11
sym53c876-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
sym53c876-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/4e/80/01/00/24
sym53c876-0: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/46/80/00/08/24
sym53c876-0: on-chip RAM at 0xdd000000
sym53c876-0: resetting, command processing suspended for 2 seconds
sym53c876-0: restart (scsi reset).
sym53c876-0: enabling clock multiplier
sym53c876-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3c
scsi : 1 host.
sym53c876-0: command processing resumed
  Vendor: PIONEER   Model: CD-ROM DR-U10X    Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
  Vendor: SyQuest   Model: EZ135S            Rev: 1-19
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 2, lun 0
  Vendor: PLEXTOR   Model: CD-R   PX-R412C   Rev: 1.05
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
scsi : detected 2 SCSI cdroms 1 SCSI disk total.
sym53c876-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
sr0: scsi3-mmc drive: 10x/10x xa/form2 cdda tray
Uniform CDROM driver Revision: 2.55
sym53c876-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
sr1: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda caddy
sym53c876-0-<2,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 262144 [128 MB] [0.1
GB]
sda: Write Protect is off
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit
encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0xd400,  00:10:5a:f6:3a:8e, IRQ
10
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate
interface.
  MII transceiver found at address 24, status 786d.
  MII transceiver found at address 0, status 786d.
  Enabling bus-master transmits and whole-frame receives.
Partition check:
 sda: sda1
 hda: hda1 hda2 < hda5 >
 hdb: hdb1 < hdb5 > hdb2 hdb3 hdb4
 hdd: [PTBL] [790/255/63] hdd1 < hdd5 >
NTFS version 990411
QNX4 filesystem v0.2 registered.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 136516k swap-space (priority -1)
nfsd_init: initialized fhcache, entries=256
tty_io.c: process 178 (nwrescued) used obsolete /dev/cua0 - update
software to use /dev/ttyS0

______________________________________________________

Hvis der - stadig er en eller flere, der måtte have "lidt" tid
tilovers. så er ovenstående noget se til...........

Systemet: SuSE 6.1 m. 128 mb ram

Hardware:
Asus v3400TNT (1)
ASUS P5A  Motherboad
ASUS SC875 SCSI
3COM 905B-TX
AVER TV-Phone

Hvis flere oplysninger ønskes, skriv det venligst...

Mvh.

John Poulsen