sslug-teknik team mailing list archive

["Jacob Sidenius" <jacob@xxxxxxxxxxxx>]

Hej John

Hvad kigger vi efter?

>Linux version 2.2.10 (root@Asterix) (gcc version 2.7.2.3) #1 SMP Tue
>Jun 22 10:37:14 CEST 1999


Hvorfor har du tilvalgt SMP?

>SMP motherboard not detected. Using dummy APIC emulation.


Her har du min /var/log/dmesg - RH6.0 på smp-hardware


Linux version 2.2.10 (root@satellite.macwerk) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #3 SMP Mon Jun 21 13:34:31 CEST 1999
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: 440BX        APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 350802444 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 349.80 BogoMIPS
Memory: 128032k/131072k available (1000k kernel code, 416k reserved, 1556k
data, 68k init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch (rgooch@xxxxxxxxxxxxx)
per-CPU timeslice cutoff: 100.22 usecs.
CPU0: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 350.7947 MHz.
..... system bus clock speed is 100.2268 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 350.62 BogoMIPS
OK.
CPU1: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (700.42 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC pin 0, 11, 16, 18, 19, 20, 21, 22, 23 not connected.
number of MP IRQ sources: 17.
number of IO-APIC registers: 24.
testing the IO APIC.......................
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 000 00  0    0    0   0   0    1    1    59
 02 0FF 0F  0    0    0   0   0    1    1    51
 03 000 00  0    0    0   0   0    1    1    61
 04 000 00  0    0    0   0   0    1    1    69
 05 000 00  0    0    0   0   0    1    1    71
 06 000 00  0    0    0   0   0    1    1    79
 07 000 00  0    0    0   0   0    1    1    81
 08 000 00  0    0    0   0   0    1    1    89
 09 000 00  0    0    0   0   0    1    1    91
 0a 000 00  0    0    0   0   0    1    1    99
 0b 000 00  1    0    0   0   0    0    0    00
 0c 000 00  0    0    0   0   0    1    1    A1
 0d 000 00  1    0    0   0   0    0    0    00
 0e 000 00  0    0    0   0   0    1    1    A9
 0f 000 00  0    0    0   0   0    1    1    B1
 10 000 00  1    0    0   0   0    0    0    00
 11 0FF 0F  1    1    0   1   0    1    1    B9
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 17
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xfdb81
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:3a
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
apm: disabled - APM is not SMP safe.
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL SE4.3A, ATA DISK drive
hdb: DELTA OPC-K101/ST1 F/W by OIPD, ATAPI CDROM drive
hdc: Maxtor 90750D6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL SE4.3A, 4110MB w/80kB Cache, CHS=524/255/63, UDMA
hdc: Maxtor 90750D6, 7157MB w/512kB Cache, CHS=14542/16/63, UDMA
hdb: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi : 0 hosts.
scsi : detected total.
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xef40, IRQ 11.
eth0: PCI NE2000 found at 0xef40, IRQ 11, 00:00:B4:A1:05:06.
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
 hdc: [PTBL] [912/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 72256k swap-space (priority -1)