sslug-teknik team mailing list archive

["John Poulsen" <jvp@xxxxxx>]

Efter at have rekompilet kernen dukker char-module-4 stadig op under
opstart, jeg har ikke kunnet finde noget under var/log. Jeg har
kompilet uden SMP. Altså ikke under "brug". Nu .config ser således ud
(efterfulgt af Makefile):

________________________
#
# Automatically generated by make menuconfig: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_M586TSC=y
# CONFIG_M686 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
# CONFIG_PCI_OLD_PROC is not set
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_BINFMT_JAVA is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_POWER_OFF=y
# CONFIG_APM_IGNORE_MULTIPLE_SUSPEND is not set
# CONFIG_APM_IGNORE_SUSPEND_BOUNCE is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_PARPORT=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
# CONFIG_BLK_DEV_CMD646 is not set
CONFIG_IDE_CHIPSETS=y
# CONFIG_BLK_DEV_4DRIVES is not set
CONFIG_BLK_DEV_ALI14XX=y
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD6580 is not set
# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_PDC4030 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_STRIPED=y
CONFIG_MD_MIRRORING=y
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_BOOT is not set
CONFIG_BLK_DEV_RAM=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
# CONFIG_NETLINK_DEV is not set
# CONFIG_FIREWALL is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_LARGE_TABLES=y
CONFIG_IP_ROUTE_NAT=y
# CONFIG_IP_PNP is not set
CONFIG_IP_ROUTER=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_IP_ALIAS=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_RARP is not set
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_SPX=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
CONFIG_LLC=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
CONFIG_NET_HW_FLOWCONTROL=y
# CONFIG_CPU_IS_SLOW is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_PQS_PDS=y
CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT=y
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_ETHERTAP is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=y
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_RTL8139 is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_ACENIC is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=y
# CONFIG_DGRS is not set
CONFIG_EEXPRESS_PRO100=y
# CONFIG_LNE390 is not set
# CONFIG_NE3210 is not set
CONFIG_NE2K_PCI=y
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ES3210 is not set
# CONFIG_EPIC100 is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_DLCI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_RADIO is not set
# CONFIG_TR is not set
# CONFIG_SHAPER is not set
CONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not set
# CONFIG_RCPCI is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA subsystem support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
CONFIG_ISDN=y
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
CONFIG_ISDN_MPP=y
# CONFIG_ISDN_AUDIO is not set
# CONFIG_ISDN_DRV_ICN is not set
CONFIG_ISDN_DRV_LOOP=y
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_DRV_SC=m
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_DRV_AVMB1 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_PRINTER_READBACK=y
CONFIG_MOUSE=y

#
# Mice
#
# CONFIG_ATIXL_BUSMOUSE is not set
CONFIG_BUSMOUSE=y
CONFIG_MS_BUSMOUSE=y
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=y
# CONFIG_PC110_PAD is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
CONFIG_NVRAM=m
CONFIG_RTC=y

#
# Video For Linux
#
CONFIG_VIDEO_DEV=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_GEMTEK=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_SAA5249=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m

#
# Joystick support
#
CONFIG_JOYSTICK=m
CONFIG_JOY_ANALOG=m
CONFIG_JOY_ASSASIN=m
CONFIG_JOY_GRAVIS=m
CONFIG_JOY_LOGITECH=m
CONFIG_JOY_SIDEWINDER=m
CONFIG_JOY_THRUSTMASTER=m
CONFIG_JOY_LIGHTNING=m
CONFIG_JOY_CONSOLE=m
CONFIG_JOY_DB9=m
CONFIG_JOY_TURBOGRAFX=m
CONFIG_DTLK=m

#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0

#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_HPFS_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX4FS_RW=y
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFSD=y
CONFIG_NFSD_SUN=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_MOUNT_SUBDIR=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y

#
# Partition Types
#
CONFIG_BSD_DISKLABEL=y
CONFIG_MAC_PARTITION=y
CONFIG_SMD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=y
CONFIG_SOUND_ES1370=y
CONFIG_SOUND_ES1370_JOYPORT_BOOT=y
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set

#
# Kernel hacking

________________
Makefile:
_______________________________
VERSION = 2
PATCHLEVEL = 2
SUBLEVEL = 10
EXTRAVERSION =

ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e
s/arm.*/arm/ -e s/sa110/arm/)

.EXPORT_ALL_VARIABLES:

CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
   else if [ -x /bin/bash ]; then echo /bin/bash; \
   else echo sh; fi ; fi)
TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)

HPATH    = $(TOPDIR)/include
FINDHPATH = $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net

HOSTCC   =gcc
HOSTCFLAGS =-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer

CROSS_COMPILE  =

AS =$(CROSS_COMPILE)as
LD =$(CROSS_COMPILE)ld
CC =$(CROSS_COMPILE)gcc -D__KERNEL__ -I$(HPATH)
CPP =$(CC) -E
AR =$(CROSS_COMPILE)ar
NM =$(CROSS_COMPILE)nm
STRIP =$(CROSS_COMPILE)strip
OBJDUMP =$(CROSS_COMPILE)objdump
MAKE =make
GENKSYMS=/sbin/genksyms

all: do-it-all

#
# Make "config" the default target if there is no configuration file
or
# "depend" the target if there is no top-level dependency information.
#
ifeq (.config,$(wildcard .config))
include .config
ifeq (.depend,$(wildcard .depend))
include .depend
do-it-all: Version vmlinux
else
CONFIGURATION = depend
do-it-all: depend
endif
else
CONFIGURATION = config
do-it-all: config
endif

#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which
case
# the default of FLOPPY is used by 'build'.
#

ROOT_DEV = CURRENT

KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)

#
# INSTALL_PATH specifies where to place the updated kernel and system
map
# images.  Uncomment if you want to place them anywhere other than
root.

INSTALL_PATH=/boot

#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots.  This is not defined in the
# makefile but the arguement can be passed to make if needed.
#

#
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
#

SVGA_MODE= -DSVGA_MODE=NORMAL_VGA

#
# standard CFLAGS
#

CFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer

ifdef CONFIG_SMP
CFLAGS += -D__SMP__
AFLAGS += -D__SMP__
endif

#
# if you want the RAM disk device, define this to be the
# size in blocks.
#

#RAMDISK = -DRAMDISK=512

# Include the make variables (CC, etc...)
#

CORE_FILES =kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o
FILESYSTEMS =fs/filesystems.a
NETWORKS =net/network.a
DRIVERS  =drivers/block/block.a \
   drivers/char/char.a \
          drivers/misc/misc.a
LIBS  =$(TOPDIR)/lib/lib.a
SUBDIRS  =kernel drivers mm fs net ipc lib

ifdef CONFIG_NUBUS
DRIVERS := $(DRIVERS) drivers/nubus/nubus.a
endif

ifeq ($(CONFIG_ISDN),y)
DRIVERS := $(DRIVERS) drivers/isdn/isdn.a
endif

DRIVERS := $(DRIVERS) drivers/net/net.a

ifeq ($(CONFIG_SCSI),y)
DRIVERS := $(DRIVERS) drivers/scsi/scsi.a
endif

ifneq
($(CONFIG_CD_NO_IDESCSI)$(CONFIG_BLK_DEV_IDECD)$(CONFIG_BLK_DEV_SR)$(C
ONFIG_PARIDE_PCD),)
DRIVERS := $(DRIVERS) drivers/cdrom/cdrom.a
endif

ifeq ($(CONFIG_SOUND),y)
DRIVERS := $(DRIVERS) drivers/sound/sound.a
endif

ifdef CONFIG_PCI
DRIVERS := $(DRIVERS) drivers/pci/pci.a
endif

ifdef CONFIG_DIO
DRIVERS := $(DRIVERS) drivers/dio/dio.a
endif

ifdef CONFIG_SBUS
DRIVERS := $(DRIVERS) drivers/sbus/sbus.a
endif

ifdef CONFIG_ZORRO
DRIVERS := $(DRIVERS) drivers/zorro/zorro.a
endif

ifeq ($(CONFIG_FC4),y)
DRIVERS := $(DRIVERS) drivers/fc4/fc4.a
endif

ifdef CONFIG_PPC
DRIVERS := $(DRIVERS) drivers/macintosh/macintosh.a
endif

ifdef CONFIG_PNP
DRIVERS := $(DRIVERS) drivers/pnp/pnp.a
endif

ifdef CONFIG_VT
DRIVERS := $(DRIVERS) drivers/video/video.a
endif

ifeq ($(CONFIG_PARIDE),y)
DRIVERS := $(DRIVERS) drivers/block/paride/paride.a
endif

ifdef CONFIG_HAMRADIO
DRIVERS := $(DRIVERS) drivers/net/hamradio/hamradio.a
endif

ifeq ($(CONFIG_USB),y)
DRIVERS := $(DRIVERS) drivers/usb/usb.a
endif

ifeq ($(CONFIG_I2O),y)
DRIVERS := $(DRIVERS) drivers/i2o/i2o.a
endif

ifeq ($(CONFIG_IRDA),y)
DRIVERS := $(DRIVERS) drivers/net/irda/irda_drivers.a
endif

include arch/$(ARCH)/Makefile

.S.s:
 $(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -E -o $*.s $<
.S.o:
 $(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -c -o $*.o $<

Version: dummy
 @rm -f include/linux/compile.h

boot: vmlinux
 @$(MAKE) -C arch/$(ARCH)/boot

vmlinux: $(CONFIGURATION) init/main.o init/version.o linuxsubdirs
 $(LD) $(LINKFLAGS) $(HEAD) init/main.o init/version.o \
  --start-group \
  $(CORE_FILES) \
  $(FILESYSTEMS) \
  $(NETWORKS) \
  $(DRIVERS) \
  $(LIBS) \
  --end-group \
  -o vmlinux
 $(NM) vmlinux | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aU]
\)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > System.map

symlinks:
 rm -f include/asm
 ( cd include ; ln -sf asm-$(ARCH) asm)
 @if [ ! -d modules ]; then \
  mkdir modules; \
 fi
 @if [ ! -d include/linux/modules ]; then \
  mkdir include/linux/modules; \
 fi

oldconfig: symlinks
 $(CONFIG_SHELL) scripts/Configure -d arch/$(ARCH)/config.in

xconfig: symlinks
 $(MAKE) -C scripts kconfig.tk
 wish -f scripts/kconfig.tk

menuconfig: include/linux/version.h symlinks
 $(MAKE) -C scripts/lxdialog all
 $(CONFIG_SHELL) scripts/Menuconfig arch/$(ARCH)/config.in

config: symlinks
 $(CONFIG_SHELL) scripts/Configure arch/$(ARCH)/config.in

include/config/MARKER: scripts/split-include include/linux/autoconf.h
 scripts/split-include include/linux/autoconf.h include/config
 @ touch include/config/MARKER

linuxsubdirs: $(patsubst %, _dir_%, $(SUBDIRS))

$(patsubst %, _dir_%, $(SUBDIRS)) : dummy include/config/MARKER
 $(MAKE) -C $(patsubst _dir_%, %, $@)

$(TOPDIR)/include/linux/version.h: include/linux/version.h
$(TOPDIR)/include/linux/compile.h: include/linux/compile.h

newversion:
 @if [ ! -f .version ]; then \
  echo 1 > .version; \
 else \
  expr 0`cat .version` + 1 > .version; \
 fi

include/linux/compile.h: $(CONFIGURATION) include/linux/version.h
newversion
 @echo -n \#define UTS_VERSION \"\#`cat .version` > .ver
 @if [ -n "$(CONFIG_SMP)" ] ; then echo -n " SMP" >> .ver; fi
 @if [ -f .name ]; then  echo -n \-`cat .name` >> .ver; fi
 @echo ' '`date`'"' >> .ver
 @echo \#define LINUX_COMPILE_TIME \"`date +%T`\" >> .ver
 @echo \#define LINUX_COMPILE_BY \"`whoami`\" >> .ver
 @echo \#define LINUX_COMPILE_HOST \"`hostname`\" >> .ver
 @if [ -x /bin/dnsdomainname ]; then \
    echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname`\"; \
  elif [ -x /bin/domainname ]; then \
    echo \#define LINUX_COMPILE_DOMAIN \"`domainname`\"; \
  else \
    echo \#define LINUX_COMPILE_DOMAIN ; \
  fi >> .ver
 @echo \#define LINUX_COMPILER \"`$(CC) $(CFLAGS) -v 2>&1 | tail -1`\"
>> .ver
 @mv -f .ver $@

include/linux/version.h: ./Makefile
 @echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" > .ver
 @echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 +
$(PATCHLEVEL) \\* 256 + $(SUBLEVEL)` >> .ver
 @echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) +
(c))' >>.ver
 @mv -f .ver $@

init/version.o: init/version.c include/linux/compile.h
include/config/MARKER
 $(CC) $(CFLAGS) -DUTS_MACHINE='"$(ARCH)"' -c -o init/version.o
init/version.c

init/main.o: init/main.c include/config/MARKER
 $(CC) $(CFLAGS) $(PROFILING) -c -o $*.o $<

fs lib mm ipc kernel drivers net: dummy
 $(MAKE) $(subst $@, _dir_$@, $@)

MODFLAGS = -DMODULE
ifdef CONFIG_MODULES
ifdef CONFIG_MODVERSIONS
MODFLAGS += -DMODVERSIONS -include $(HPATH)/linux/modversions.h
endif

modules: $(patsubst %, _mod_%, $(SUBDIRS))

$(patsubst %, _mod_%, $(SUBDIRS)) : include/linux/version.h
 $(MAKE) -C $(patsubst _mod_%, %, $@) CFLAGS="$(CFLAGS) $(MODFLAGS)"
MAKING_MODULES=1 modules

modules_install:
 @( \
 MODLIB=$(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE); \
 cd modules; \
 MODULES=""; \
 inst_mod() { These="`cat $$1`"; MODULES="$$MODULES $$These"; \
  mkdir -p $$MODLIB/$$2; cp $$These $$MODLIB/$$2; \
  echo Installing modules under $$MODLIB/$$2; \
 }; \
 mkdir -p $$MODLIB; \
 \
 if [ -f BLOCK_MODULES ]; then inst_mod BLOCK_MODULES block; fi; \
 if [ -f NET_MODULES   ]; then inst_mod NET_MODULES   net;   fi; \
 if [ -f IPV4_MODULES  ]; then inst_mod IPV4_MODULES  ipv4;  fi; \
 if [ -f IPV6_MODULES  ]; then inst_mod IPV6_MODULES  ipv6;  fi; \
 if [ -f SCSI_MODULES  ]; then inst_mod SCSI_MODULES  scsi;  fi; \
 if [ -f FS_MODULES    ]; then inst_mod FS_MODULES    fs;    fi; \
 if [ -f NLS_MODULES   ]; then inst_mod NLS_MODULES   fs;    fi; \
 if [ -f CDROM_MODULES ]; then inst_mod CDROM_MODULES cdrom; fi; \
 if [ -f HAM_MODULES   ]; then inst_mod HAM_MODULES   net;   fi; \
 if [ -f SOUND_MODULES ]; then inst_mod SOUND_MODULES sound; fi; \
 if [ -f VIDEO_MODULES ]; then inst_mod VIDEO_MODULES video; fi; \
 if [ -f FC4_MODULES   ]; then inst_mod FC4_MODULES   fc4;   fi; \
 if [ -f IRDA_MODULES  ]; then inst_mod IRDA_MODULES  net;   fi; \
 \
 ls *.o > $$MODLIB/.allmods; \
 echo $$MODULES | tr ' ' '\n' | sort | comm -23 $$MODLIB/.allmods - >
$$MODLIB/.misc; \
 if [ -s $$MODLIB/.misc ]; then inst_mod $$MODLIB/.misc misc; fi; \
 rm -f $$MODLIB/.misc $$MODLIB/.allmods; \
 )

# modules disabled....

else
modules modules_install: dummy
 @echo
 @echo "The present kernel configuration has modules disabled."
 @echo "Type 'make config' and enable loadable module support."
 @echo "Then build a kernel with module support enabled."
 @echo
 @exit 1
endif

clean: archclean
 rm -f kernel/ksyms.lst include/linux/compile.h
 rm -f core `find . -name '*.[oas]' ! -regex '.*lxdialog/.*' \
  ! -regex '.*ksymoops/.*' -print`
 rm -f core `find . -type f -name 'core' -print`
 rm -f core `find . -name '.*.flags' -print`
 rm -f vmlinux System.map
 rm -f .tmp*
 rm -f drivers/char/consolemap_deftbl.c drivers/video/promcon_tbl.c
 rm -f drivers/char/conmakehash
 rm -f drivers/sound/bin2hex drivers/sound/hex2hex
 if [ -d modules ]; then \
  rm -f core `find modules/ -type f -print`; \
 fi
 rm -f submenu*

mrproper: clean archmrproper
 rm -f include/linux/autoconf.h include/linux/version.h
 rm -f
drivers/net/hamradio/soundmodem/sm_tbl_{afsk1200,afsk2666,fsk9600}.h
 rm -f drivers/net/hamradio/soundmodem/sm_tbl_{hapn4800,psk4800}.h
 rm -f
drivers/net/hamradio/soundmodem/sm_tbl_{afsk2400_7,afsk2400_8}.h
 rm -f drivers/net/hamradio/soundmodem/gentbl
 rm -f drivers/char/hfmodem/gentbl drivers/char/hfmodem/tables.h
 rm -f drivers/sound/*_boot.h drivers/sound/.*.boot
 rm -f .version .config* config.in config.old
 rm -f scripts/tkparse scripts/kconfig.tk scripts/kconfig.tmp
 rm -f scripts/lxdialog/*.o scripts/lxdialog/lxdialog
 rm -f scripts/ksymoops/*.o scripts/ksymoops/ksymoops
 rm -f .menuconfig.log
 rm -f include/asm
 rm -rf include/config
 rm -f .depend `find . -name .depend -print`
 rm -f core `find . -size 0 -print`
 rm -f .hdepend scripts/mkdep scripts/split-include
 rm -f $(TOPDIR)/include/linux/modversions.h
 rm -rf $(TOPDIR)/include/linux/modules
 rm -rf modules

distclean: mrproper
 rm -f core `find . \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  -o -name '.*.rej' -o -name '.SUMS' -o -size 0 \) -print` TAGS

backup: mrproper
 cd .. && tar cf - linux/ | gzip -9 > backup.gz
 sync

sums:
 find . -type f -print | sort | xargs sum > .SUMS

dep-files: scripts/mkdep archdep include/linux/version.h
 scripts/mkdep init/*.c > .depend
 scripts/mkdep `find $(FINDHPATH) -follow -name \*.h ! -name
modversions.h -print` > .hdepend
# set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i fastdep ;done
# let this be made through the fastdep rule in Rules.make
 $(MAKE) $(patsubst %,_sfdep_%,$(SUBDIRS))
_FASTDEP_ALL_SUB_DIRS="$(SUBDIRS)"

MODVERFILE :=

ifdef CONFIG_MODVERSIONS
MODVERFILE := $(TOPDIR)/include/linux/modversions.h
endif

depend dep: dep-files $(MODVERFILE)

# make checkconfig: Prune 'scripts' directory to avoid "false
positives".
checkconfig:
 perl -w scripts/checkconfig.pl `find * -path
'scripts' -prune -o -name '*.[hcS]' -print | sort`

checkhelp:
 perl -w scripts/checkhelp.pl `find * -name [cC]onfig.in -print`

ifdef CONFIGURATION
..$(CONFIGURATION):
 @echo
 @echo "You have a bad or nonexistent" .$(CONFIGURATION) ": running
'make" $(CONFIGURATION)"'"
 @echo
 $(MAKE) $(CONFIGURATION)
 @echo
 @echo "Successful. Try re-making (ignore the error that follows)"
 @echo
 exit 1

#dummy: ..$(CONFIGURATION)
dummy:

else

dummy:

endif

include Rules.make

#
# This generates dependencies for the .h files.
#

scripts/mkdep: scripts/mkdep.c
 $(HOSTCC) $(HOSTCFLAGS) -o scripts/mkdep scripts/mkdep.c

scripts/split-include: scripts/split-include.c

___________________________________________________

Håber alt dette kan hjælpe med fejlfindingen.

Mvh.

John Poulsen
 $(HOSTCC) $(HOSTCFLAGS) -o scripts/split-include
scripts/split-include.c


#
CONFIG_MAGIC_SYSRQ=y

-----Oprindelig meddelelse-----
Fra: storner@xxxxxxxx <storner@xxxxxxxx>
Nyhedsgrupper: sslug.teknik
Til: sslug-teknik@xxxxxxxx <sslug-teknik@xxxxxxxx>
Dato: 24. juni 1999 07:15
Emne: Re: Sv: [TEKNIK] Char-module-4 m/logs og andre problemer (læs
boot.msg i denne mail)


>In <002a01bebdc7$9c11b3e0$946efea9@asterix> "John Poulsen"
<jvp@xxxxxx> writes:
>
>
>>I conf.modules siger, char-module-4, at det har med seriel at gøre,
>>men hvad kan/skal jeg se efter, hvis det er den virtuelle konsol,
det
>>er galt med?
>
>char-major-4 er konsollen OG serielle porte. At dømme efter din
>boot-log er begge dele konfigureret ind i din kerne - dog er jeg
>lidt i tvivl om din konsol-opsætning i kernen. Lad os se din
>kerne-konfiguration (.config filen in /usr/src/linux).
>
>Og så forstår jeg ikke, hvorfor du har konfigureret din kerne
>som en multi-processor (SMP) kerne.
>
>Hvad foretager du på systemet, når disse beskeder med "char-major-4"
>dukker op ? Og hvor ser du dem henne - i /var/log/messages, eller ?
>
>>Der er en del problemer: Char-module.4, evt. vituel konsul, hvorfor
>>DMA'en ikke virker på harddiskene - og måske flere ting, jeg ikke er
>>klar over p.t., i det jeg er en novice på Linux - endnu.
>
>"Problemer" er så meget sagt ... jeg ser det kun som et problem, når
>tingene ikke virker.
>
>DMA på harddiskene tunes med hdparm programmet.
>
>>Jeg vil have AL kerneting overstået, før jeg går videre, det er jo
det
>>vigtigste, at det er optimeret og fungerer.
>
>Hæng dig nu ikke for meget i det. Der er meget andet, som også er
>spændende.
>
>--
>Henrik Storner     | "Software engineering is a race between
engineers
><storner@xxxxxxxx> |  who try to create foolproof software and the
>                   |  universe which is trying to create bigger
fools.
>                   |  So far, the universe is winning..."
>