sslug-teknik team mailing list archive

["Søren Toft" <soeren@xxxxxxxxxxx>]

Jeg har et problem med at få mit netværk til at virke på min bærbare. Jeg
har installeret red-hat 6.0 med PCMCIA understøttelse. Mit netkort (et
Kingston KNE-PC2BT)  gendkendes korrekt når det indsættes, (to høje beep),
og "cardctl ident" viser at den kortet er gendkendt korrekt.
Jeg har konfigureret netværksindstillingerne vha. netcfg, og "ifconfig"
viser korrekt de instillinger jeg har valgt for kortet.

Problemet er, at selv om alt ser ud til at være i orden, så kan jeg ikke få
forbindelse til andre computere i netværket. Jeg har forsøgt at pinge andre
computere i netværket, men får time-out. Jeg har også forsøgt at pinge min
bærbare fra andre computere, dette giver også et time-out. Jeg kan godt
pinge mig selv.

Netkortet bliver automatisk tildelt interrupt 10. I windows tildeles selve
PCMCIA slottet int. 10, mens netkortet får interrupt 9.

Jeg har vedlagt udskriften fra min "ifconfig", "cardctl ident" og "dmesg"
nederst.

På forhånd tak
Søren

#cardctl ident

Socket 0:
  product info: "Kingston", "KNE-PC2", ""
  manfid: 0x0186, 0x0100
  function: 6 (network)
Socket 1:
  no product info available


#ifconfig

eth0      Link encap:Ethernet  HWaddr 00:C0:F0:1C:85:2F
          inet addr:10.0.0.2  Bcast:10.0.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          Interrupt:10 Base address:0x300

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:95 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0

#dmesg

Linux version 2.2.5-15 (root@xxxxxxxxxxxxxxxxxxxxxx) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09 EDT
1999
Detected 300688487 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 599.65 BogoMIPS
Memory: 63140k/65536k available (996k kernel code, 412k reserved, 928k data,
60k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: AMD AMD-K6(tm) 3D processor stepping 00
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfabb0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
OPTI621X: IDE controller on PCI bus 00 dev a0
OPTI621X: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: TOSHIBA MK4006MAV, ATA DISK drive
hdc: UJDA150, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA MK4006MAV, 3909MB w/0kB Cache, CHS=993/128/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
   pII_mmx   :   616.839 MB/sec
   p5_mmx    :   556.260 MB/sec
   8regs     :   427.863 MB/sec
   32regs    :   310.134 MB/sec
using fastest function: pII_mmx (616.839 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 hda3 < hda5 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 72540k swap-space (priority -1)
Linux PCMCIA Card Services 3.0.9
  kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999
  options:  [pci] [cardbus] [apm]
Intel PCIC probe:
  O2Micro OZ6836 PCI-to-CardBus at bus 0 slot 7, mem 0x68000000, 2 sockets
    host opts [0]: [a 00] [b 83] [c f0] [d 02] [mhpg 18] [fifo fb] [e 1a]
[no pci irq] [lat 64/176] [bus 32/34]
    host opts [1]: [a 00] [b ff] [c f0] [d 02] [mhpg 18] [fifo f9] [e 1a]
[no pci irq] [lat 64/176] [bus 35/37]
    ISA irqs (scanned) = 10 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x12f8-0x12ff 0x1378-0x137f
0x1398-0x139f 0x13f0-0x13ff
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x408-0x40f 0x480-0x48f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: excluding 0xaf8-0xaff
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
eth0: NE2000 Compatible: port 0x300, irq 10, hw_addr 00:C0:F0:1C:85:2F
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
nfsd_init: initialized fhcache, entries=256
VFS: Disk change detected on device fd(2,0)