sslug-teknik team mailing list archive

[Gunner <gunner@xxxxxxxxxxxxxxxxxxxx>]

2010/3/18 Peter Makholm <peter@xxxxxxxxxxx>

> Gunner <gunner@xxxxxxxxxxxxxxxxxxxx> writes:
>
> > Jeg har en debian server der kører 24/7 men uret (når jeg skriver 'date')
> er
> > ca to timer foran almindelig tid.(det jeg ser på mit armbåndsur)
>
> Først og fremmest ville jeg lige tjekke at systemet er korekt sat op
> med hensyn til tidszone og om systemuret er sat til UTC eller
> lokaltid.
>

min timezone, /etc/default/rcS, og ntp.conf
har jeg pastet nederst i denne mail


>
> > Spørgsmålet er hvordan jeg mest smertefrit får den stillet korrekt og
> > derefter kommer til at køre ntp med update fra et internetur.
>
> En mulighed ville bare være at sætte tiden i hånden til noget der er
> tæt nok på. En anden mulighed er at bruge kommandoen ntpdate der
> stiller uret hårdt baseret på ntp.
>
ok - tak. Prøver det!




>
> //Makholm
>
######################################
gunner@eksekver:~$ cat /etc/default/rcS
#
# /etc/default/rcS
#
# Default settings for the scripts in /etc/rcS.d/
#
# For information about these variables see the rcS(5) manual page.
#
# This file belongs to the "initscripts" package.

TMPTIME=0
SULOGIN=no
DELAYLOGIN=no
UTC=yes
VERBOSE=no
FSCKFIX=no
RAMRUN=no
RAMLOCK=no

######################


eksekver:~# cat /etc/timezone
Europe/Copenhagen
eksekver:~#
##############################
eksekver:~# cat /etc/ntp.conf
# /etc/ntp.conf, configuration for ntpd

driftfile /var/lib/ntp/ntp.drift
statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

server time.nist.gov
#server ntp.ubuntu.com
server pool.ntp.org
#server pool.ntp.org

# pool.ntp.org maps to more than 300 low-stratum NTP servers.
# Your server will pick a different set every time it starts up.
#  *** Please consider joining the pool! ***
#  *** <http://www.pool.ntp.org/join.html> ***
server 0.debian.pool.ntp.org iburst
server 1.debian.pool.ntp.org iburst
server 2.debian.pool.ntp.org iburst
server 3.debian.pool.ntp.org iburst

# By default, exchange time with everybody, but don't allow configuration.
# See /usr/share/doc/ntp-doc/html/accopt.html for details.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access,
# but only if cryptographically authenticated
#restrict 192.168.123.0  mask  255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet,
# de-comment the next lines. Please do this only if you trust everybody
# on the network!
#disable auth
#broadcastclient