sslug-teknik team mailing list archive

[Atte André Jensen <atte@xxxxxxxxxxxxxx>]

On 2010-05-05 08:50, Martin Møller Skarbiniks Pedersen wrote:

> Prøv med
> smartctl -t short /dev/sda
> vent fem minutter
> og skriv så
> smartctl -a /dev/sda

Super, tak!

Jeg fatter ikke lige helt outputtet, ku' du hjælpe mig med at tyde det 
og komme med din vurdering?


atte@vestbjerg:~$ sudo smartctl -t short /dev/sda
[sudo] password for atte:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in 
off-line mode".
Drive command "Execute SMART Short self-test routine immediately in 
off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Wed May  5 10:26:26 2010

Use smartctl -X to abort test.
atte@vestbjerg:~$ sudo smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     FUJITSU MHY2200BH
Serial Number:    K429T8128JAY
Firmware Version: 0040020B
User Capacity:    200.049.647.616 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3c
Local Time is:    Wed May  5 10:34:36 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine 
completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		 ( 811) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 115) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE 
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail 
Always       -       156830
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail 
Offline      -       47120384
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail 
Always       -       1
  4 Start_Stop_Count        0x0032   099   099   000    Old_age 
Always       -       2422
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail 
Always       -       8589934592000
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail 
Always       -       2666
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail 
Offline      -       0
  9 Power_On_Hours          0x0032   086   086   000    Old_age 
Always       -       7019
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail 
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
Always       -       2422
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always 
      -       142
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always 
      -       91987
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always 
      -       40 (Lifetime Min/Max 13/55)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always 
      -       3
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always 
      -       453509120
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always 
      -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age 
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   253   000    Old_age   Always 
      -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always 
      -       17253
203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always 
      -       1529057050359
240 Head_Flying_Hours       0x003e   200   200   000    Old_age   Always 
      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining 
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      7019 
     -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

--
Atte