sslug-teknik team mailing list archive

[Björn Lundin <b.f.lundin@xxxxxxxxx>]

Jag försöker få igång en seriell IR-sändare på min myth-backend, så
jag kan styra
en digitalbox via IR

Efter mycket strul har jag kompilerat lirc själv, fick problem med apt-get.

#i fönster 1 gör jag följande:
bnl@ibm:~/download/lirc-0.8.6$ sudo modprobe lirc_serial


# i fönster 2:
bnl@ibm:/etc/lirc$ sudo /usr/local/sbin/lircd  -n -o
/var/run/lirc/lircd -d /dev/lirc /etc/lirc/lircd.conf
lircd: lircd(default) ready, using /var/run/lirc/lircd


#i fönster 1 igen:
bnl@ibm:~/download/lirc-0.8.6$ irsend -d /var/run/lirc/lircd SEND_ONCE
Dilog_DT_358 6
irsend: command failed: SEND_ONCE Dilog_DT_358 6
irsend: transmission failed



# fönster 2 ser nu ut så här:
bnl@ibm:/etc/lirc$ sudo /usr/local/sbin/lircd  -n -o
/var/run/lirc/lircd -d /dev/lirc /etc/lirc/lircd.conf
lircd: lircd(default) ready, using /var/run/lirc/lircd
lircd: accepted new client on /var/run/lirc/lircd
lircd: invalid send buffer
lircd: this remote configuration cannot be used to transmit
lircd: error processing command: SEND_ONCE Dilog_DT_358 6
lircd: transmission failed
lircd: removed client




bnl@ibm:~/download/lirc-0.8.6$ cat /etc/lirc/lircd.conf
begin remote
 name            Dilog_DT_358
 bits            32
 eps             30
 aeps            100
 one             0     0
 zero            0     0
 gap             147988

 begin codes
      OnOff           0x54A4699B
      Mute            0x4CA46A5B
      1               0x54A46167
      2               0x4CAC4197
      3               0x4CA661AB
      4               0x4CA46657
      5               0x5406666B
      6               0x4CAC469B
      7               0x4CACC4A7
      8               0x54AC101B
      9               0x54AC1067
      PageDown        0x4CA41A57
      0               0x54AC615B
      PageUp          0x4CAC966B
      Menu            0x54A41997
      EPG             0x4CAD2847
      Exit            0x54AC19AB
      ChannelUp       0x4CAC0057
      ChannelDown     0x54ACA06B
      VolumeDown      0x54AC01A7
      VolumeUp        0x5406019B
      OK/Store        0x4CACB5A7
      TV/Radio        0x54ACAC47
      FAV             0x03EF6676
      Group           0x54AD296B
      AllChan         0x4CACD1A7
      Return          0x54ACD467
      Function        0x4CAC50AB
      Selecttext      0x54A5855B
      TextTV          0x4CA40697
      PictureFormat   0x54ACD507
      MultiVideo      0x4CACD007
      Soundselection  0x54ACAD5B
      SleepTimer      0x4C86065B
      Pause           0x54A5199B
      Zoom            0x54AD066B
      Info            0x4CA41A9B

 end codes

end remote


Jag har gjort
sudo setserial /dev/ttyS0 uart none



Men hur skall hardware.conf se ut?


-- 
/Björn