sslug-teknik team mailing list archive

[Martin Møller Skarbiniks Pedersen <traxplayer@xxxxxxxxx>]

On 6 September 2010 16:27, "E. Sjørlund" <es@xxxxxxxxxx> wrote:

> Her er lidt af hvordan verden ser ud:
>
> bitte:~ # fdisk -l
>
> Disk /dev/sda: 60.0 GB, 60011642880 bytes
> 255 heads, 63 sectors/track, 7296 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x000ce23e
>
>   Device Boot      Start         End      Blocks   Id  System
> /dev/sda1   *           1          17      131072   83  Linux
> Partition 1 does not end on cylinder boundary.
> /dev/sda2              17         262     1966080   83  Linux
> Partition 2 does not end on cylinder boundary.
> /dev/sda3             262        7296    56507936+  fd  Linux raid
> autodetect


Det er helt galt.
sda1 lægger fra 1-17 og sda2 ligger fra 17-262 og sda3 262-7296.

Dvs. at cylinder 17 og cylinder 262 bliver brugt af begge to
partitioner på samme tid!.

Det skal du have rettet med det samme. Hvordan er det overhovedet
lykkes af lave ?

/Martin



>
> Disk /dev/sdb: 60.0 GB, 60011642880 bytes
> 255 heads, 63 sectors/track, 7296 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x000bb394
>
>   Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1               1         262     2097152   83  Linux
> Partition 1 does not end on cylinder boundary.
> /dev/sdb2             262        7296    56507936+  fd  Linux raid
> autodetect
>
> Disk /dev/md0: 115.7 GB, 115728056320 bytes
> 2 heads, 4 sectors/track, 28253920 cylinders
> Units = cylinders of 8 * 512 = 4096 bytes
> Disk identifier: 0x00000000
>
> Disk /dev/md0 doesn't contain a valid partition table
> bitte:~ #
> mount
> /dev/md0 on / type reiserfs (rw,acl,user_xattr)
> proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda1 on /boot type ext2 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> securityfs on /sys/kernel/security type securityfs (rw)
> none on /proc/fs/vmblock/mountPoint type vmblock (rw)
> gvfs-fuse-daemon on /home/bs/.gvfs type fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=bs)
> bitte:~ #
>
>
>
>