sslug-teknik team mailing list archive

["Emil S Hansen" <laven.data@xxxxxxxx>]

Her er så en profil til Eicon DIVA T/A:

----SNIP   emils-profil.prf
[General]
Device Type=1
Default Profile=0
ISDN Type=0

[Profile 0]
Profile Name=Profile 0
Connect Type=10
Data Over Voice=0
Bandwidth Allocation Control Protocol=0
Bandwidth Allocation Protocol Start Interval=60
Bandwidth Allocation Protocol Repeat Interval=60
Dynamic Bandwidth Allocation=0
Auto SPID Location Alternative=0
Primary Number1=87223399
Primary Number2=87223399
Primary SPID1=
Primary SPID2=
X.25 DTE Address=
Primary SwitchType=2
Primary Non-Initialised Terminal Mode 1=0
Primary Non-Initialised Terminal Mode 2=0
Alternate SwitchType=255
Alternate Number1=
Alternate Number2=
Alternate SPID1=
Alternate SPID2=
Alternate Non-Initialised Terminal Mode 1=0
Alternate Non-Initialised Terminal Mode 2=0
POTS Available=1
Voice Mail POTS 1=0
Voice Mail POTS 2=0
Audio POTS 1=1
Audio POTS 2=0
Distinct Ring POTS 1=0
Distinct Ring POTS 2=0
Supplementary Services POTS 1=0
Supplementary Services POTS 2=1
Dial Access POTS 1=0
Dial Access POTS 2=1
Ring Type=10
Region=0
X25 Facilities=
AODI Supported=1
AODI=0
X25 Version=0
Delay Open B1=5
Delay Open B2=5
Threshold Open B1=70
Threshold Open B2=70
Threshold Close B1=40
Threshold Close B2=40

[Profile 1]
Profile Name=Profile 1
Connect Type=12
Data Over Voice=0
Bandwidth Allocation Control Protocol=1
Bandwidth Allocation Protocol Start Interval=120
Bandwidth Allocation Protocol Repeat Interval=1
Dynamic Bandwidth Allocation=1
Auto SPID Location Alternative=0
Primary Number1=87223399
Primary Number2=87223399
Primary SPID1=
Primary SPID2=
X.25 DTE Address=
Primary SwitchType=2
Primary Non-Initialised Terminal Mode 1=0
Primary Non-Initialised Terminal Mode 2=0
Alternate SwitchType=255
Alternate Number1=
Alternate Number2=
Alternate SPID1=
Alternate SPID2=
Alternate Non-Initialised Terminal Mode 1=0
Alternate Non-Initialised Terminal Mode 2=0
POTS Available=1
Voice Mail POTS 1=0
Voice Mail POTS 2=0
Audio POTS 1=1
Audio POTS 2=0
Distinct Ring POTS 1=0
Distinct Ring POTS 2=1
Supplementary Services POTS 1=0
Supplementary Services POTS 2=1
Dial Access POTS 1=0
Dial Access POTS 2=1
Ring Type=10
Region=0
X25 Facilities=
AODI Supported=1
AODI=0
X25 Version=0
Delay Open B1=5
Delay Open B2=10
Threshold Open B1=70
Threshold Open B2=70
Threshold Close B1=40
Threshold Close B2=30

[Profile 2]
Profile Name=Profile 2
Connect Type=12
Data Over Voice=0
Bandwidth Allocation Control Protocol=0
Bandwidth Allocation Protocol Start Interval=60
Bandwidth Allocation Protocol Repeat Interval=60
Dynamic Bandwidth Allocation=1
Auto SPID Location Alternative=0
Primary Number1=87223399
Primary Number2=87223399
Primary SPID1=
Primary SPID2=
X.25 DTE Address=
Primary SwitchType=2
Primary Non-Initialised Terminal Mode 1=0
Primary Non-Initialised Terminal Mode 2=0
Alternate SwitchType=255
Alternate Number1=
Alternate Number2=
Alternate SPID1=
Alternate SPID2=
Alternate Non-Initialised Terminal Mode 1=0
Alternate Non-Initialised Terminal Mode 2=0
POTS Available=1
Voice Mail POTS 1=0
Voice Mail POTS 2=0
Audio POTS 1=1
Audio POTS 2=0
Distinct Ring POTS 1=0
Distinct Ring POTS 2=1
Supplementary Services POTS 1=0
Supplementary Services POTS 2=1
Dial Access POTS 1=0
Dial Access POTS 2=1
Ring Type=1
Region=0
X25 Facilities=
AODI Supported=1
AODI=0
X25 Version=0
Delay Open B1=5
Delay Open B2=5
Threshold Open B1=70
Threshold Open B2=70
Threshold Close B1=40
Threshold Close B2=40

----SNIP

Profil 0 er ren PPP, uden BOD:  (ATZ0)
Altså EN B-kanal og ingen mulgihed for bundling.

Profil 1 er MPPP, med BOD:   (ATZ1)
En B-kanal, og der bliver åbnet en mere hvis der
er behov, kanal nr 2 bliver så lukket når der ikke
er behov længere, i denne profil er "behov" sat
til 70% udnyttelse, men med et 10 sek. delay,
B-kanal nr. 2 lukker tidligst efter 1 min. og når
belsatningen på den falder til under 40%.

Profil 2 er MPPP, uden BOD:  (ATZ2)
Altså begge B-kanaler hele tiden.

Jeg bruger disse profiler sammen med et par
håndbryggede chatscripts, men de virker sikkert
også sammen med diverse pppd frontends.

Verifications protokollen jeg bruger er PAP.

For at loade disse profiler til et DIVA, skal man
desværre bruge Eicons "Terminal Adapters" program
som kun køre under WinXX, hvis det er bydende
nødvendigt, kan jeg nok finde de AT komandoer der
skal til for at kunne klare det fra linux.


Mvh.

	Emil S Hansen
	laven.data@xxxxxxxx
	UNI:15749535

P.S. Husk lige at ændre tlf. nr. fra 87223399 til
det i nu selv har :)