sslug-teknik team mailing list archive

[Mikkel Fischer <halte@xxxxxx>]

Jeg fik samba 2.05 op og køre på min linux box, med logon og roaming profiles, hvis du ønsker det sender jeg gerne
konfigurations (smb.conf) til dig.
Ellers kig på www.samba.org der er også beskrivelse af hvordan man kan gøre.
/Mikkel




Henrik Krobath Olesen wrote:

> Hej SSLUG
>
> Jeg faldt over et at dine svar på sslug, hvilket jeg fandt meget interessant. P.t. sidder jeg og makker loidt med at få Linux op at køre på min stationære maskine, så den kan komme til at fungere som en PDC - altså så jeg ved at specificere i win98, at jeg gerne vil logge på et NT domæne (går udfra at et domæne er et domæne og at Linux makinen også kan lave et sådant.)
>
> Hele magien kommer så til syne når jeg skal logge på mit eget domæne med min bærbare PC. Hvad je gforestiller mig er, at jeg selvfølgelig skriver password for at logge på domænet og at der så sker det, at mine "hom share" i Linux bliver synlig under "Denne Computer" og resten af de shares jeg har fået specificeret på Linux boxen er synlilge under "Andre Computere". Ligeledes drømmer jeg om at min win98 profil skal gemmes i mit hjemme dir på Linux Boxen, men det ved jeg ikke om det kun er med win NT det kan lade sig gøre...?
>
> Indtil videre har jeg fået Samba op at køre med de share jeg ønsker og det fungere sådan set fint. Jeg har i smb.conf skrevet at Linux boxen skal være local master.
>
> Jeg har ligeledes været inde og tilføje PlaintextPassword tingen i registreringsdatabasen, så jeg kan altså godt logge ind på samba med password nu.
>
> Desværre så sker der ikke ret meget når jeg logger på domænet "WORKGROUP" på win98 maskinen, den starter godt nok op og skriver at brugerprofilen oprettes, men intet er ændret, altså ingen domæne til mig... :-(
>
> Jeg håber du måske har lidt ide om hvad mine problemer kan skyldes og kan lede mig i den rigtige retning. Jeg har vedlagt min smb.conf. Jeg bruger smb 2.0.3
>
> MVH Henrik Krobath Olesen
>
> PS. Håber ikke du er blevet træt af at læse, for her er en del mere... ;-))
>   [global]
>   # workgroup = NT-Domain-Name or Workgroup-Name
>   workgroup = WORKGROUP
>   # server string is the equivalent of the NT Description field
>   server string = Samba Server
>   # Uncomment this if you want a guest account, you must add this to /etc/passwd
>   # otherwise the user "nobody" is used
>   guest account = nobody
>   # this tells Samba to use a separate log file for each machine
>   # that connects
>   log file = /var/log/samba/log.%m
>   # Put a capping on the size of the log files (in Kb).
>   max log size = 50
>   # Security mode. Most people will want user level security. See
>   # security_level.txt for details.
>   security = user
>   # Use password server option only with security = server
>   ; password server = <NT-Server-Name>
>   # Password Level allows matching of _n_ characters of the password for
>   # all combinations of upper and lower case.
>   ; password level = 8
>   ; username level = 8
>   # You may wish to use password encryption. Please read
>   # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
>   # Do not enable this option unless you have read those documents
>   encrypt passwords = yes
>   smb passwd file = /etc/smbpasswd
>   # The following are needed to allow password changing from Windows to
>   # update the Linux sytsem password also.
>   # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
>   # NOTE2: You do NOT need these to allow workstations to change only
>   # the encrypted SMB passwords. They allow the Unix password
>   # to be kept in sync with the SMB password.
>   unix password sync = Yes
>   passwd program = /usr/bin/passwd %u
>   passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
>   # Unix users can map to different SMB User names
>   ; username map = /etc/smbusers
>   # Using the following line enables you to customise your configuration
>   # on a per machine basis. The %m gets replaced with the netbios name
>   # of the machine that is connecting
>   ; include = /etc/smb.conf.%m
>   # Most people will find that this option gives better performance.
>   # See speed.txt and the manual pages for details
>   socket options = TCP_NODELAY
>   # Configure Samba to use multiple interfaces
>   # If you have multiple network interfaces then you must list them
>   # here. See the man page for details.
>   ; interfaces = 192.168.12.2/24 192.168.13.2/24
>   # Configure remote browse list synchronisation here
>   # request announcement to, or browse list sync from:
>   # a specific host or from / to a whole subnet (see below)
>   ; remote browse sync = 192.168.3.25 192.168.5.255
>   # Cause this host to announce itself to local subnets here
>   ; remote announce = 192.168.1.255 192.168.2.44
>   # Browser Control Options:
>   # set local master to no if you don't want Samba to become a master
>   # browser on your network. Otherwise the normal election rules apply
>   local master = yes
>   # OS Level determines the precedence of this server in master browser
>   # elections. The default value should be reasonable
>   ; os level = 33
>   # Domain Master spe½cifies Samba to be the Domain Master Browser. This
>   # allows Samba to collate browse lists between subnets. Don't use this
>   # if you already have a Windows NT domain controller doing this job
>   domain master = yes
>   # Preferred Master causes Samba to force a local browser election on startup
>   # and gives it a slightly higher chance of winning the election
>   ; preferred master = yes
>   # Use only if you have an NT server on your network that has been
>   # configured at install time to be a primary domain controller.
>   ; domain controller = <NT-Domain-Controller-SMBName>
>   # Enable this if you want Samba to be a domain logon server for
>   # Windows95 workstations.
>   domain logons = yes
>   # if you enable domain logons then you may want a per-machine or
>   # per user logon script
>   # run a specific logon batch file per workstation (machine)
>   ; logon script = %m.bat
>   # run a specific logon batch file per username
>   logon script = %U.bat
>   # Where to store roving profiles (only for Win95 and WinNT)
>   # %L substitutes for this servers netbios name, %U is username
>   # You must uncomment the [Profiles] share below
>   logon path = \\%L\Profiles\%U
>   # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
>   # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
>   # this has been changed in version 1.9.18 to no.
>   dns proxy = no
>   # Case Preservation can be handy - system default is _no_
>   # NOTE: These can be set on a per share basis
>   ; preserve case = no
>   ; short preserve case = no
>   # Default case is normally upper case for all DOS files
>   default case = lower
>   # Be very careful with case sensitivity - it can break things!
>   ; case sensitive = no
>   #============================ Share Definitions ==============================
>   [homes]
>   comment = Home Directories
>   browseable = yes
>   writable = yes
>   # Un-comment the following and create the netlogon directory for Domain Logons
>   [netlogon]
>   comment = Network Logon Service
>   path = /home/netlogon
>   guest ok = yes
>   writable = no
>   share modes = no
>
>   # Un-comment the following to provide a specific roving profile share
>   # the default is to use the user's home directory
>   [Profiles]
>   path = /home/profiles
>   browseable = no
>   guest ok = yes
>
>   # NOTE: If you have a BSD-style print system there is no need to
>   # specifically define each individual printer
>   ;[printers]
>   ; comment = All Printers
>   ; path = /var/spool/samba
>   ; browseable = no
>   # Set public = yes to allow user 'guest account' to print
>   ; guest ok = no
>   ; writable = no
>   ; printable = yes
>   # This one is useful for people to share files
>   [tmp]
>   comment = Temporary file space
>   path = /tmp
>   read only = no
>   public = yes
>   # A publicly accessible directory, but read only, except for people in
>   # the "staff" group
>   [win98]
>   comment = win98 on donald
>   path = /mnt/win98
>   public = no
>   writable = yes
>   write list = @root hro
>   create mode = 0777
>   [primary]
>   comment = primary on donald
>   path = /mnt/primary
>   public = no
>   writable = yes
>   write list = @root hro
>   create mode = 0777
>   [secondary]
>   comment = secondary on donald
>   path = /mnt/secondary
>   public = yes
>   writable = yes
>   write list = @root hro
>   create mode = 0777
>   [pub_html]
>   comment = webroot
>   path = /home/httpd/html
>   public = no
>   writable = no
>   write list = @root hro
>   create mode = 0777
>   [native]
>   comment = Native Linux
>   available = yes
>   path = /
>   public = no
>   guest only = no
>   writable = no
>   browseable = yes
>   write list = root
>   only user = no