sslug-teknik team mailing list archive

[Niels Rasmussen <nielsemand@xxxxxxxx>]

Hej alle

I forbindelse med fejlsøgning har jeg flyttet cdrom-drevet fra hdc til
hdb.

I min uvidenhed er jeg så kommet til at slette /dev/hdb !!! :-(

ln /dev/hdb /cdrom

i /cdrom har jeg slettet hdb, Så nu figurerer den ikke i /dev :-(

Hvordan får jeg oprettet det igen så den peger på mit cdromdrev.

med ls -al /dev/cdrom får jeg: 
lrwxrwxrwx   1 root     root            3 Oct  2 23:51 /dev/cdrom -> hdc

Det er da forkert eller hvad ??

Her er hvad "dmesg" siger:

Linux version 2.2.10 (root@xxxxxxxxxxxxxxxxxx) (gcc version 2.7.2.3) #1
Tue Jul 20 16:32:24 MEST 1999
Detected 198950805 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 79.46 BogoMIPS
Memory: 30572k/32768k available (1172k kernel code, 408k reserved
(endbase 0xa0000), 572k data, 44k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb420
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 20480K size
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL_TM2110A, ATA DISK drive
hdb: CD-ROM CDU311, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: QUANTUM FIREBALL_TM2110A, 2014MB w/76kB Cache, CHS=1023/64/63
hdb: ATAPI 8X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
Adding Swap: 62492k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.

I /etc/fstab ser det nu sådan ud:
/dev/hda2       swap                      swap            defaults   0 0
/dev/hda5       /                         ext2            defaults   1 1
/dev/hda7       /opt                      ext2            defaults   1 2
/dev/hda8       /usr                      ext2            defaults   1 2
/dev/hda6       /home                     ext2            defaults   1 2

/dev/hdb        /cdrom                    iso9660       
ro,noauto,user,exec 0   0

/dev/fd0        /floppy                   auto          
rw,noauto,user,exec 0   0

none            /proc                     proc            defaults   0 
0
# End of YaST-generated fstab lines

Jeg håber på et lærerigt svar !!

Jeg bruger suse 6.2

/Niels