sslug-teknik team mailing list archive

["Lasse Wieslander" <cf_linux@xxxxxxxxxx>]

Ret denne
    security = user
til
    security = share

Forskellen er om maskinen forventer at du logger på den, eller bare kan
bruge dens "share"s

Lasse



*********** REPLY SEPARATOR  ***********

On 11-01-00 at 19:54 Allan Christiansen wrote:

>Jeg har nogle problemmer med at få min win 95 box til at connecte til
samba/
>linux jeg bliver hele tiden bedt om adgangskode til IPC$ resourcen.
>
>min conf ser ud som nedenfor.
>
>Allan
>
>
>----
>
># This is the main Samba configuration file. You should read the
># smb.conf(5) manual page in order to understand the options listed
># here. Samba has a huge number of configurable options (perhaps too
># many!) most of which are not shown in this example
>#
># Any line which starts with a ; (semi-colon) or a # (hash)
># is a comment and is ignored. In this example we will use a #
># for commentry and a ; for parts of the config file that you
># may wish to enable
>#
># NOTE: Whenever you modify this file you should run the command
"testparm"
># to check that you have not many any basic syntactic errors.
>#
>#=======================
Global Settings
>========================
=============
>[global]
>
># workgroup = NT-Domain-Name or Workgroup-Name
>    workgroup = hjemme
>
># server string is the equivalent of the NT Description field
>    server string = Samba Server
>
># This option is important for security. It allows you to restrict
># connections to machines which are on your local network. The
># following example restricts access to two C class networks and
># the "loopback" interface. For more examples of the syntax see
># the smb.conf man page
>   hosts allow = 10.200.150. 127.
>
># if you want to automatically load your printer list rather
># than setting them up individually then you'll need this
>    printcap name = /etc/printcap
>    load printers = yes
>
># It should not be necessary to spell out the print system type unless
># yours is non-standard. Currently supported print systems include:
># bsd, sysv, plp, lprng, aix, hpux, qnx
>;   printing = bsd
>
># Uncomment this if you want a guest account, you must add this to
>/etc/passwd
># otherwise the user "nobody" is used
>#  guest account = pcguest
>
># this tells Samba to use a separate log file for each machine
># that connects
>    log file = /var/log/samba/log.%m
>
># Put a capping on the size of the log files (in Kb).
>;    max log size = 50
>
># Security mode. Most people will want user level security. See
># security_level.txt for details.
>    security = user
># Use password server option only with security = server
>;   password server = <NT-Server-Name>
>
># Password Level allows matching of _n_ characters of the password for
># all combinations of upper and lower case.
>;  password level = 8
>;  username level = 8
>
># You may wish to use password encryption. Please read
># ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
># Do not enable this option unless you have read those documents
>;  encrypt passwords = yes
>;  smb passwd file = /etc/smbpasswd
>
># The following are needed to allow password changing from Windows to
># update the Linux sytsem password also.
># NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
># NOTE2: You do NOT need these to allow workstations to change only
>#        the encrypted SMB passwords. They allow the Unix password
>#        to be kept in sync with the SMB password.
>;  unix password sync = Yes
>;  passwd program = /usr/bin/passwd %u
>;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password*
%n\n
>*passwd:*all*authentication*tokens*updated*successfully*
>
># Unix users can map to different SMB User names
>;  username map = /etc/smbusers
>
># Using the following line enables you to customise your configuration
># on a per machine basis. The %m gets replaced with the netbios name
># of the machine that is connecting
>;   include = /etc/smb.conf.%m
>
># Most people will find that this option gives better performance.
># See speed.txt and the manual pages for details
>    socket options = TCP_NODELAY
>
># Configure Samba to use multiple interfaces
># If you have multiple network interfaces then you must list them
># here. See the man page for details.
>;   interfaces = 192.168.12.2/24 192.168.13.2/24
>
># Configure remote browse list synchronisation here
>#  request announcement to, or browse list sync from:
>#       a specific host or from / to a whole subnet (see below)
>;   remote browse sync = 192.168.3.25 192.168.5.255
># Cause this host to announce itself to local subnets here
>;   remote announce = 192.168.1.255 192.168.2.44
>
># Browser Control Options:
># set local master to no if you don't want Samba to become a master
># browser on your network. Otherwise the normal election rules apply
>   local master = yes
>
># OS Level determines the precedence of this server in master browser
># elections. The default value should be reasonable
>;   os level = 33
>
># Domain Master specifies Samba to be the Domain Master Browser. This
># allows Samba to collate browse lists between subnets. Don't use this
># if you already have a Windows NT domain controller doing this job
>   domain master = yes
>
># Preferred Master causes Samba to force a local browser election on
startup
># and gives it a slightly higher chance of winning the election
>   preferred master = yes
>
># Use only if you have an NT server on your network that has been
># configured at install time to be a primary domain controller.
>;   domain controller = <NT-Domain-Controller-SMBName>
>
># Enable this if you want Samba to be a domain logon server for
># Windows95 workstations.
>;   domain logons = yes
>
># if you enable domain logons then you may want a per-machine or
># per user logon script
># run a specific logon batch file per workstation (machine)
>;   logon script = %m.bat
># run a specific logon batch file per username
>;   logon script = %U.bat
>
># Where to store roving profiles (only for Win95 and WinNT)
>#        %L substitutes for this servers netbios name, %U is username
>#        You must uncomment the [Profiles] share below
>;   logon path = \\%L\Profiles\%U
>
># All NetBIOS names must be resolved to IP Addresses
># 'Name Resolve Order' allows the named resolution mechanism to be
specified
># the default order is "host lmhosts wins bcast". "host" means use the
unix
># system gethostbyname() function call that will use either /etc/hosts OR
># DNS or NIS depending on the settings of /etc/host.config,
>/etc/nsswitch.conf
># and the /etc/resolv.conf file. "host" therefore is system configuration
># dependant. This parameter is most often of use to prevent DNS lookups
># in order to resolve NetBIOS names to IP Addresses. Use with care!
># The example below excludes use of name resolution for machines that are
>NOT
># on the local network segment
># - OR - are not deliberately to be known via lmhosts or via WINS.
>name resolve order = wins lmhosts bcast
>
># Windows Internet Name Serving Support Section:
># WINS Support - Tells the NMBD component of Samba to enable it's WINS
>Server
>   wins support = yes
>
># WINS Server - Tells the NMBD components of Samba to be a WINS Client
>#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT
>both
>;   wins server = w.x.y.z
>
># WINS Proxy - Tells Samba to answer name resolution queries on
># behalf of a non WINS capable client, for this to work there must be
># at least one  WINS Server on the network. The default is NO.
>;   wins proxy = yes
>
># DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
># via DNS nslookups. The built-in default for versions 1.9.17 is yes,
># this has been changed in version 1.9.18 to no.
>;    dns proxy = yes
>;    encrypt passwords = no
>;    password level = 0
>;    preferred master = no
>;    os level = 0
>;    null passwords = no
>;    dead time = 0
>;    debug level = 0
>;    domain master = no
>
># Case Preservation can be handy - system default is _no_
># NOTE: These can be set on a per share basis
>;  preserve case = no
>;  short preserve case = no
># Default case is normally upper case for all DOS files
>;  default case = lower
># Be very careful with case sensitivity - it can break things!
>;  case sensitive = no
>
>#========================
==== Share Definitions
>========================
======
>[homes]
>    comment = Home Directories
>    browseable = yes
>    writable = yes
>    available = yes
>    public = yes
>    only user = yes
>
># Un-comment the following and create the netlogon directory for Domain
>Logons
>[netlogon]
>  comment = Network Logon Service
>  path = /home/netlogon
>  guest ok = yes
>  writable = no
>  share modes = no
>
>
># Un-comment the following to provide a specific roving profile share
># the default is to use the user's home directory
>;[Profiles]
>;    path = /home/profiles
>;    browseable = no
>;    guest ok = yes
>
>
># NOTE: If you have a BSD-style print system there is no need to
># specifically define each individual printer
>[printers]
>    comment = All Printers
>    path = /var/spool/samba
>    browseable = yes
># Set public = yes to allow user 'guest account' to print
>    public = yes
>    guest ok = Yes
>    writable = no
>    printable = yes


-------------------------------------------------
Find din fotohandler  -  http://www.fotoforum.dk
Webudvikling          -  http://www.cyberforum.dk
-------------------------------------------------