sslug-teknik team mailing list archive

["Peder Borg Poulsen" <peder@xxxxxxxxxx>]

Hejsa!
 
Som absolut ny linux-bruger, har jeg forsøgt at installere et netkort
 (d-link DFE-530TX - det jeg lige kunne få fat på). Linux (RedHat 6.1) fik
 fint fat på kortet, og det kommer også med op ved opstart.
 
 Jeg har tildelt det en ip-adresse - hvilken jeg godt kan pinge.

 Mit problem består i, at jeg ikke kan pinge andre ip-adresser, f.eks. min
 nt-workstation eller min printserver (Network is unreachable). Jeg har også
 prøvet at have et 3com kort i - men, samme problem. Hvad kan årsagen hertil
 være, og hvad kan jeg gøre for at afhjælpe det.

ifconfig eth0 up giver svaret: resource is temporarily unavailable
route add default eth0 give svaret: network is down

Tillader mig at vedhæfte dmesg-udtrækket, proc_pci og conf.modules - undrer mig, at netkortet er tildelt irq0
 
 På forhånd tak.
 
 Har I brug for flere oplysninger, håbe jeg i siger til.
 
 --
 /Peder 


PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VLSI 82C592-FC1 (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  Latency=16.  
  Bus  0, device   1, function  0:
    ISA bridge: VLSI 82C593-FC1 (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No bursts.  
  Bus  0, device  15, function  0:
    VGA compatible controller: S3 Inc. Trio32/Trio64 (rev 0).
      Medium devsel.  
      Non-prefetchable 32 bit memory at 0xfe000000 [0xfe000000].
  Bus  0, device  16, function  0:
    IDE interface: CMD 640 (buggy) (rev 2).
      Medium devsel.  IRQ 14.  
  Bus  0, device  17, function  0:
    Ethernet controller: VIA Technologies Unknown device (rev 6).
      Vendor id=1106. Device id=3043.
      Medium devsel.  Master Capable.  Latency=200.  Min Gnt=118.Max Lat=152.
      I/O at 0xfc80 [0xfc81].
      Non-prefetchable 32 bit memory at 0xfedffc00 [0xfedffc00].

Linux version 2.2.12-20 (root@xxxxxxxxxxxxxxxxxxxxxx) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:25:54 EDT 1999
Detected 74977280 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 29.80 BogoMIPS
Memory: 38448k/40960k available (1008k kernel code, 412k reserved, 748k data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium 75 - 200 stepping 05
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfc807
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS not found.
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
CMD640: ignored by ide_scan_pci_device() (uses own driver)
ide0: buggy cmd640b interface on PCI (type1), config=0x1e
ide1: not serialized, secondary interface not cmd640
cmd640: drive0 timings/prefetch(off) preserved
cmd640: drive1 timings/prefetch(off) preserved
hda: WDC AC2850F, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-5302TA, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC2850F, 814MB w/64kB Cache, CHS=827/32/63
hdc: ATAPI 4X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
   8regs     :    69.723 MB/sec
   32regs    :    49.530 MB/sec
using fastest function: 8regs (69.723 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
Adding Swap: 31208k swap-space (priority -1)
via-rhine.c:v1.01 2/27/99  Written by Donald Becker
  http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html
eth0: VIA VT3043 Rhine at 0xfc80, 00:50:ba:09:62:96, IRQ 0.
eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 0000.
VFS: Disk change detected on device fd(2,0)

alias eth0 via-rhine