sslug-teknik team mailing list archive

["hYBEn" <hyben2@xxxxxxxx>]

Følgende er hvad min box skriver når den starter op, hvad er der galt?
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb1e0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00)
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport0: no IEEE-1284 device present.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide0: VIA Bus-Master (U)DMA Timing Config Success
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: IBM-DHEA-34331, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-6102B, ATAPI CDROM drive
hdd: CR-2801TE, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DHEA-34331, 4134MB w/472kB Cache, CHS=527/255/63, UDMA
hdc: ATAPI 24X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
  Vendor: MITSUMI   Model: CR-2801TE         Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr7 at scsi0, channel 0, id 0, lun 7
scsi : detected 8 SCSI cdroms total.
sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr1: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr2: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr3: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr4: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr5: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr6: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
sr7: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
 hda: hda1 hda2 < hda5 > hda3
NTFS version 990411
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 40k freed
INIT: version 2.76 booting
Loading /etc/kbd/default.map.gz
Activating swap...
Unable to find swap-space signature
Checking root file system...
Parallelizing fsck version 1.12 (9-Jul-98)
/dev/hda3: clean, 84496/257040 files, 944532/1028160 blocks
lspci not found, so PCI resource conflict not checked
Board 1 has Identity e5 ff ff ff ff 70 00 8c 0e:  CTL0070 Serial No -1
[checksum e5]
CTL0070/-1[0]{Audio               }: Ports 0x220 0x330 0x388; IRQ5 DMA1 DMA5
--- Enabled OK
Calculating module dependencies... done.
Loading modules: ip_masq_quake ip_masq_irc ip_masq_ftp sb Soundblaster audio
driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.13 detected OK (220)
SB16: Invalid MIDI port 388
opl3 YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
1993-1996

Checking all file systems...
Parallelizing fsck version 1.12 (9-Jul-98)
Mounting local file systems...
attempt to access beyond end of device
03:06: rw=0, want=1, limit=0
FAT bread failed
mount: wrong fs type, bad option, bad superblock on /dev/hda6,
       or too many mounted file systems
       (aren't you trying to mount an extended partition,
       instead of some logical partition inside?)
Unable to find swap-space signature
SIOCSIFADDR: Operation not supported by device
netmask: unknown interface.

Local time: Tue Oct 17 19:08:37 UTC 2000

Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
Recovering nvi editor sessions... done.
Configuring serial ports...done.
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configuring audio mixer settings with gom.../etc/rc.boot/gom: gom: command
not
found
run-parts: /etc/rc.boot/gom exited with return code 127
INIT: Entering runlevel: 2
Starting system log daemon: syslogd klogd.
/etc/init.d/genpower: UPS monitor daemon not enabled
Starting PCMCIA services: module directory /lib/modules/2.2.9/pcmcia not
found.
Starting kerneld, version 2.1.121 (pid 128)
Setting up IP spoofing protection...done.
Starting base networking daemons: portmap inetd.
Starting domain name service: named.
Starting process accounting: failed
Process accounting not available on this system.
Starting anac(h)ronistic cron: anacron.
Starting Firewalling Services: ipchains.
Starting mouse interface server: gpm.
Starting IP paranoia daemons: tcplogd icmplogd.
Starting isdn services :.
Starting printer spooler: lpd.
Starting printer spooler: lpd.
Starting omniorb name server: done.
Checking quotas...done.
Turning on quotas.
Starting internet redirection server: rinetd.
Starting net tamagotchi server: tamad.
Starting X font sever: xfs.
Starting /usr/sbin/xntpd...
Starting NFS servers:.
Starting additional networking services:.
Starting proxy server: squid.
Starting filtering proxy server: junkbuster.
Starting professional ftp daemon: proftpd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting web server: apache.

Debian GNU/Linux 2.1 thomas tty1

thomas login: root
Password:root
Linux thomas 2.2.9 #3 Tue Sep 21 21:22:23 UTC 1999 i586 unknown

Copyright (C) 1993-1999 Software in the Public Interest, and others




--
----> Visit http://petition.eurolinux.org <---