sslug-teknik team mailing list archive

[Hans Henrik Schmidt <schmidt@xxxxxxx>]

Skal det her ikke være Allow from all ????????

<Location /doc>
  order deny,allow
  deny from all
  allow from localhost
  Options Indexes FollowSymLinks


Hans Henrik Schmidt



-----Oprindelig meddelelse-----
Fra:	Gitte Wange [SMTP:gitte@xxxxxxxxxxxxxxxxxxx]
Sendt:	28. december 2000 13:59
Til:	sslug-teknik@xxxxxxxx
Emne:	Re: [TEKNIK] Apache og 403 error

Mogens Kjaer wrote:

> Gitte Wange wrote:
> ....
> 
>> Den bliver jeg altså ikke meget klogere af ....
> 
> 
> Kan du poste hele din httpd.conf?
> 
> Mogens

Jepsen ... her er den:

# #
# # httpd.conf -- Apache HTTP server configuration file
# #


# Based upon the NCSA server configuration files originally by Rob McCool.

# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.

# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.

# After this file is processed, the server will look for and process
# /usr/conf/srm.conf and then /usr/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.

# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' 
server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.

# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".


# ## Section 1: Global Environment

# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.



# ServerType is either inetd, or standalone.  Inetd mode is only 
supported on
# Unix platforms.

ServerType standalone
# AddModule mod_php.c# AddModule mod_php3.c


# ExtendedStatus: controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.

# ExtendedStatus On

# ## Section 2: 'Main' server configuration

# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.

# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.



# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.



# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.

Port 80


# Number of servers to start initially --- should be a reasonable ballpark
# figure.

StartServers 8


# Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).

# It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  The default values are probably OK for most sites.

MinSpareServers 5
MaxSpareServers 20


# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.

MaxKeepAliveRequests 100


# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.

KeepAliveTimeout 15


# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...

MaxClients 150


# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.

# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.

MaxRequestsPerChild 100


# PidFile: The file in which the server should record its process
# identification number when it starts.

PidFile /var/run/httpd.pid


# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order.  The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity.  The commented-out values
# below are the built-in defaults.  You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.

# ResourceConfig conf/srm.conf
# AccessConfig conf/access.conf


# Timeout: The number of seconds before receives and sends time out.

Timeout 300


# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.

ScoreBoardFile /var/run/httpd.scoreboard


# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.

# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.

# Do NOT add a slash at the end of the directory path.

ServerRoot "/etc/httpd"


# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.

HostnameLookups off


# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.

# Listen 3000
# Listen 12.34.56.78:80


# BindAddress: You can support virtual hosts with this option. This 
directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.

# BindAddress *


# Dynamic Shared Object (DSO) Support

# To be able to use the functionality of a module which was built as a 
DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your 
httpd
# binary.

# Note: The order is which modules are loaded is important.  Don't change
# the order below without expert advice.

# Example:
# LoadModule foo_module modules/mod_foo.so
# LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule env_module         modules/mod_env.so
LoadModule config_log_module  modules/mod_log_config.so
LoadModule agent_log_module   modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
# LoadModule mime_magic_module  modules/mod_mime_magic.so
LoadModule mime_module        modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module      modules/mod_status.so
LoadModule info_module        modules/mod_info.so
LoadModule includes_module    modules/mod_include.so
LoadModule autoindex_module   modules/mod_autoindex.so
LoadModule dir_module         modules/mod_dir.so
LoadModule cgi_module         modules/mod_cgi.so
LoadModule asis_module        modules/mod_asis.so
LoadModule imap_module        modules/mod_imap.so
LoadModule action_module      modules/mod_actions.so
# LoadModule speling_module     modules/mod_speling.so
LoadModule userdir_module     modules/mod_userdir.so
LoadModule alias_module       modules/mod_alias.so
LoadModule rewrite_module     modules/mod_rewrite.so
LoadModule access_module      modules/mod_access.so
LoadModule auth_module        modules/mod_auth.so
LoadModule anon_auth_module   modules/mod_auth_anon.so
LoadModule db_auth_module     modules/mod_auth_db.so
LoadModule digest_module      modules/mod_digest.so
LoadModule proxy_module       modules/libproxy.so
# LoadModule cern_meta_module   modules/mod_cern_meta.so
LoadModule expires_module     modules/mod_expires.so
LoadModule headers_module     modules/mod_headers.so
LoadModule usertrack_module   modules/mod_usertrack.so

# LoadModule example_module     modules/mod_example.so
# LoadModule unique_id_module   modules/mod_unique_id.so
LoadModule setenvif_module    modules/mod_setenvif.so
# LoadModule bandwidth_module   modules/mod_bandwidth.so
# LoadModule put_module         modules/mod_put.so

# Extra Modules
LoadModule perl_module        modules/libperl.so
# LoadModule php_module         modules/mod_php.so
# LoadModule php3_module        modules/libphp3.so

# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
LoadModule php4_module /usr/lib/apache/libphp4.so
ClearModuleList
AddModule mod_php4.c
# AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
# AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
# AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
# AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
# AddModule mod_example.c
# AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c

# AddModule mod_bandwidth.c
# AddModule mod_put.c

# Extra Modules
AddModule mod_perl.c


# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.

ServerAdmin gittewj@xxxxxxxxx


# ServerName: allows you to set a host name which is sent back to 
clients for
# your server if it's different than the one the program would get 
(i.e., use
# "www" instead of the host's real name).

# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't 
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address 
here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.

ServerName linuxbabe.hhknet.dk


# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.

DocumentRoot /home/httpd/html


# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.

ErrorLog /var/log/httpd/error_log


# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the 
client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.

ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"

# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.

# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!

User nobody
Group nobody
<IfModule mod_php4.c>
       AddType application/x-httpd-php .php .php3 .phtml
       AddType application/x-httpd-php-source .phps
</IfModule>

<IfModule mod_mime_magic.c>
   MIMEMagicFile share/magic
</IfModule>

<IfModule mod_php3.c>
  AddType application/x-httpd-php3 .php3
  AddType application/x-httpd-php3-source .phps
</IfModule>

<IfModule mod_perl.c>
  Alias /perl/ /home/httpd/perl/
</IfModule>

<Location /perl>
   SetHandler perl-script
   PerlHandler Apache::Registry
   Options +ExecCGI
</Location>

<Location /doc>
  order deny,allow
  deny from all
  allow from localhost
  Options Indexes FollowSymLinks
</Location>

<IfModule mod_php4.c>
       AddIcon /icons/php4.gif .php3 .php4 .php .phtml
</IfModule>

<IfModule mod_php4.c>
       AddIcon /icons/phps.gif .phps
</IfModule>

# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.

LockFile /var/lock/httpd.lock


# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.

UserDir public_html


# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.

# <Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
# Order deny,allow
# Deny from all
# </Limit>
# </Directory>


# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.

DirectoryIndex index.php index.html index.htm index.shtml index.cgi


# AccessFileName: The name of the file to look for in each directory
# for access control information.

AccessFileName .htaccess


# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line 
disables
# this behavior, and proxies will be allowed to cache the documents.

# CacheNegotiatedDocs

UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.

UseCanonicalName On


# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.

TypesConfig /etc/mime.types


# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.

DefaultType text/plain


# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.

LogLevel warn


# The following directives define some format nicknames for use with
# a CustomLog directive (see below).

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" 
combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent


# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.

CustomLog /var/log/httpd/access_log common


# If you would like to have agent and referer logfiles, uncomment the

# following directives.

# CustomLog /var/log/httpd/referer_log referer
# CustomLog /var/log/httpd/agent_log agent


# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.

# CustomLog /var/log/httpd/access_log combined


# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail

ServerSignature On


# Aliases: Add here as many aliases as you need (with no limit). The 
format is
# Alias fakename realname

# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/"..

Alias /icons/ "/home/httpd/icons/"


# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL



# Directives controlling the display of server-generated directory listings.



# FancyIndexing: whether you want fancy directory indexing or standard

IndexOptions FancyIndexing


# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^


# DefaultIcon: which icon to show for files which do not have an icon
# explicitly set.

DefaultIcon /icons/unknown.gif


# AddDescription: allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename

# AddDescription "GZIP compressed document" .gz
# AddDescription "tar archive" .tar
# AddDescription "GZIP compressed tar archive" .tgz


# ReadmeName: the name of the README file the server will look for by
# default, and append to directory listings.

# HeaderName: the name of a file which should be prepended to
# directory indexes.

# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.

ReadmeName README
HeaderName HEADER


# IndexIgnore: a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.

IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t


# AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) 
uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.

AddEncoding x-compress Z
AddEncoding x-gzip gz tgz


# AddLanguage: allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.  Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage pl .po"
# to avoid the ambiguity with the common suffix for perl scripts.

AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it


# LanguagePriority: allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.

LanguagePriority en fr de

# The following is for PHP/FI (PHP2):


AddType application/x-tar .tgz


# AddHandler: allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)

# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.

# To use CGI scripts:

# AddHandler cgi-script .cgi


# To use server-parsed HTML files

AddType text/html .shtml
AddHandler server-parsed .shtml


# Uncomment the following line to enable Apache's send-asis HTTP file
# feature

# AddHandler send-as-is asis


# If you wish to use server-parsed imagemap files, use

AddHandler imap-file map


# To enable type maps, you might want to use

# AddHandler type-map var


# Action: lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location



# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document

# MetaDir .web


# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.

# MetaSuffix .meta


# Customizable error response (Apache style)
# these come in three flavors

# 1) plain text
# ErrorDocument 500 "The server made a boo boo.

# n.b.  the (") marks it as text, it does not get output

# 2) local redirects
# ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
# ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using 
server-side-includes.

# 3) external redirects
# ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will *not* be available to such a script.


# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.

BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0


# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.

BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0


# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/httpd/conf/passwd.
# You must unremark these two lines at the top of this file as well:
# LoadModule put_module         modules/mod_put.so
# AddModule mod_put.c

# Alias /upload /tmp
# <Location /upload>
# EnablePut On
# AuthType Basic
# AuthName Temporary
# AuthUserFile /etc/httpd/conf/passwd
# EnableDelete Off
# umask 007
# <Limit PUT>
# require valid-user
# </Limit>
# </Location>

# Allow server status reports, with the URL of 
http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.

# <Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Location>


# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.

# <Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Location>

# Allow access to local system documentation from localhost
Alias /doc/ /usr/doc/

<Directory />
       Options FollowSymlinks
       AllowOverride AuthConfig FileInfo Indexes Limit Options
       Order allow,deny
       Allow from all
</Directory>

<Directory "/home/httpd/html">


# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".

# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.

       Options Includes Indexes FollowSymlinks
       AllowOverride AuthConfig FileInfo Indexes Limit Options


# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"



# Controls who can get stuff from this server.

   Order allow,deny
   Allow from all
</Directory>

<Files ~>
       AllowOverride AuthConfig FileInfo Indexes Limit Options
   Order allow,deny
   Deny from all
</Files>

<Directory "/home/httpd/icons">
       Options MultiViews Indexes
       AllowOverride AuthConfig FileInfo Indexes Limit Options
   Order allow,deny
   Allow from all
</Directory>

<Directory "/home/httpd/cgi-bin">
       Options ExecCgi
       AllowOverride AuthConfig FileInfo Indexes Limit Options
   Order allow,deny
   Allow from all
</Directory>



Sådanne ....

Gitte