sslug-teknik team mailing list archive

[Andreas Bach Aaen <abach@xxxxxxxxxxxxxxxxx>]

Torsdag 18. Januar 2001 23:34 skrev Lars Bo Hansen :
> Jeg er nået et skridt videre.
>
> Jeg lavede en 'insmod card=2'
> Jeg kan nu se at tuneren er lidt i gang. Jeg har dog ikke fundet
> nogen kanaler.
> Lydchippene fandt den heller ikke rigtigt, men det kommer stille og
> roligt.

Jeg har et Hauppauge stereo tv-kort. Min opstart giver følgende i 
/var/log/messages filen:

Jan 21 23:44:14 bohr kernel: Linux video capture interface: v1.00 
Jan 21 23:44:14 bohr kernel: i2c-algo-bit.o: i2c bit algorithm module 
Jan 21 23:44:14 bohr kernel: i2c-core.o: driver i2c msp3400 driver 
registered. 
Jan 21 23:44:14 bohr kernel: bttv: driver version 0.7.48 loaded 
Jan 21 23:44:14 bohr kernel: bttv: using 2 buffers with 2080k (4160k 
total) for capture 
Jan 21 23:44:14 bohr kernel: bttv: Bt8xx card found (0). 
Jan 21 23:44:14 bohr kernel: bttv0: Bt878 (rev 2) at 00:0b.0, irq: 
11, latency: 32, memory: 0xeb001000 
Jan 21 23:44:14 bohr kernel: bttv0: subsystem: 0070:13eb  =>  
Hauppauge WinTV  =>  card=10 
Jan 21 23:44:14 bohr kernel: bttv0: model: BT878(Hauppauge new 
(bt878)) [autodetected] 
Jan 21 23:44:14 bohr kernel: bttv0: Hauppauge msp34xx: reset line 
init 
Jan 21 23:44:14 bohr kernel: msp34xx: init: chip=MSP3410D-B4, has 
NICAM support 
Jan 21 23:44:14 bohr kernel: msp3410: daemon started 
Jan 21 23:44:14 bohr kernel: bttv0: i2c attach [MSP3410D-B4] 
Jan 21 23:44:14 bohr kernel: i2c-core.o: client [MSP3410D-B4] 
registered to adapter [bt848 #0](pos. 0). 
Jan 21 23:44:14 bohr kernel: tuner: chip found @ 0x61 
Jan 21 23:44:14 bohr kernel: bttv0: i2c attach [Philips PAL] 
Jan 21 23:44:14 bohr kernel: i2c-core.o: client [Philips PAL] 
registered to adapter [bt848 #0](pos. 1). 
Jan 21 23:44:14 bohr kernel: i2c-core.o: adapter bt848 #0 registered 
as adapter 0. 
Jan 21 23:44:14 bohr kernel: bttv0: Hauppauge eeprom: model=37284, 
tuner=Philips FM1216 (5) 
Jan 21 23:44:14 bohr kernel: bttv0: i2c: checking for MSP34xx @ 
0x80... found 
Jan 21 23:44:14 bohr kernel: bttv0: i2c: checking for TDA9875 @ 
0xb0... not found 
Jan 21 23:44:14 bohr kernel: bttv0: i2c: checking for TDA7432 @ 
0x8a... not found 
Jan 21 23:44:14 bohr kernel: tvaudio: TV audio decoder + audio/video 
mux driver 
Jan 21 23:44:14 bohr kernel: tvaudio: known chips: 
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 
(PV951) 
Jan 21 23:44:14 bohr kernel: i2c-core.o: driver generic i2c audio 
driver registered. 
Jan 21 23:44:14 bohr kernel: bttv0: i2c attach [tda9840] 
Jan 21 23:44:14 bohr kernel: i2c-core.o: client [tda9840] registered 
to adapter [bt848 #0](pos. 2). 
Jan 21 23:44:14 bohr kernel: bttv0: PLL: 28636363 => 35468950 ... ok


Jeg kører med kerne 2.4.0-test11, så mon ikke dette er tæt på jeres 
konfiguration.

stereo-lyden virker også fint. Dette er først for alvor kommet til at 
virke for mig under se seneste test kerner.

Mvh
-- 
 /\ ,_  _|,_ _  _  _,  |¨) _  _ |_   Marius Simonsensvej 7, 2.tv
/¨¨\| )(_|| (-'.-|`-,  |¨).-|(_ | )  8200 Aarhus N,      Denmark
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨  Phone :        +45 86105533
Don´t fear the penguins.         abach stofanet.dk / aba tbit.dk