sslug-teknik team mailing list archive

[Anders Nielsen <anielsen@xxxxxxx>]

Jeg har købt en HP LaserJet 1200 som jeg vil forbinde til min kasse vha. 
USB.

Når jeg modprober får jeg følgende i /var/log/messages (jeg har oversat 
USB med debug):

May 31 14:34:23 localhost kernel: PCI: Found IRQ 10 for device 00:04.3
May 31 14:34:23 localhost kernel: PCI: The same IRQ used for device 00:09.0
May 31 14:34:23 localhost kernel: uhci.c: USB UHCI at I/O 0xd000, IRQ 10
May 31 14:34:23 localhost kernel: uhci.c: detected 2 ports
May 31 14:34:23 localhost kernel: usb.c: new USB bus registered, 
assigned bus number 1
May 31 14:34:23 localhost kernel: Product: USB UHCI-alt Root Hub
May 31 14:34:23 localhost kernel: SerialNumber: d000
May 31 14:34:23 localhost kernel: hub.c: USB hub found
May 31 14:34:23 localhost kernel: hub.c: 2 ports detected
May 31 14:34:23 localhost kernel: uhci.c:  Linus Torvalds, Johannes 
Erdfelt, Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman 
Weissgaerber
May 31 14:34:23 localhost kernel: uhci.c: USB Universal Host Controller 
Interface driver
May 31 14:34:23 localhost kernel: usb.c: registered new driver usblp
May 31 14:34:23 localhost kernel: printer.c: v0.8 Michael Gee, Pavel 
Machek, Vojtech Pavlik, Randy Dunlap
May 31 14:34:23 localhost kernel: printer.c: USB Printer Device Class driver
May 31 14:34:23 localhost kernel: hub.c: USB new device connect on 
bus1/2, assigned device number 2
May 31 14:34:23 localhost kernel: Manufacturer: ALCOR
May 31 14:34:23 localhost kernel: Product: Generic USB Hub
May 31 14:34:23 localhost kernel: hub.c: USB hub found
May 31 14:34:23 localhost kernel: hub.c: 4 ports detected
May 31 14:34:23 localhost kernel: hub.c: USB new device connect on 
bus1/2/1, assigned device number 3
May 31 14:34:23 localhost kernel: Manufacturer: HewLett Packard
May 31 14:34:23 localhost kernel: Product: HP LaserJet 1200
May 31 14:34:23 localhost kernel: SerialNumber: 00CNBF094310
May 31 14:34:23 localhost kernel: printer.c: usblp0: device node 
registration failed
May 31 14:34:23 localhost kernel: printer.c: usblp0: USB Bidirectional 
printer dev 3 if 0 alt 0
May 31 14:34:24 localhost kernel: [c31370f0] link (03137062) element 
(051af030)
May 31 14:34:24 localhost kernel:  Element != First TD
May 31 14:34:24 localhost kernel:   0: [c51af000] link (051af030) e2 
Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=03bb9e40)
May 31 14:34:24 localhost kernel:   1: [c51af030] link (051af060) e0 
Stalled CRC/Timeo Length=7ff MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) 
(buf=07ae5fbc)
May 31 14:34:24 localhost kernel:   2: [c51af060] link (00000001) e3 IOC 
Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
May 31 14:34:24 localhost kernel:
May 31 14:34:24 localhost kernel: hub.c: get_port_status failed (err = -84)
May 31 14:34:24 localhost kernel: [c31370c0] link (03137062) element 
(051af030)
May 31 14:34:24 localhost kernel:  Element != First TD
May 31 14:34:24 localhost kernel:   0: [c51af000] link (051af030) e1 
Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=03bb9e40)
May 31 14:34:24 localhost kernel:   1: [c51af030] link (051af060) e0 
Stalled CRC/Timeo Length=7ff MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) 
(buf=07ae5fb8)
May 31 14:34:24 localhost kernel:   2: [c51af060] link (00000001) e3 IOC 
Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
May 31 14:34:24 localhost kernel:
May 31 14:34:24 localhost kernel: hub.c: get_hub_status failed

Her hæfter jeg mig især ved fejlene omkring og efter "device node 
registation failed".

Er der nogle der kan forklare mig dette?  Sig endelig til hvis andre 
oplysninger er nødvendig.

Venlig hilsen
 Anders Nielsen.