sslug-teknik team mailing list archive

[Kasper Edwards <ke@xxxxxxxxxx>]

Er det et VIA chipset? Der har i tidensløb været utallige problemer med
harddiskcontrollerne på VIA mainboards.  Det kan også være at din kerne
ikke er konfigureret til at understøtte dit chipset. En løsning er at
bruge en kerne der erfaringsmæssigt virker til dit chipset.

Kasper

Christian Treldal wrote:
> 
> Hej igen
> 
> Jeg prøver lige igen. (unskyld undeholdningsværdien i forrige indslag)
> 
> Da jeg opgraderede fra 7.0 -> 7.1 er jeg begyndt at få fejl på den ene
> HD under opstart.
> Se venligst vedhæftede bootlog
> 
> Det har noget med en manglende DMA at gøre, og det kan få maskinen til
> at gå helt i selvsving.
> Under RH 7.0 var der ingen problemer, hvad har man lavet om som disken
> ikke kan lide??
> 
> Med venlig hilsen
> Christian Treldal
> 
>   ------------------------------------------------------------------------
> Aug 14 21:04:32 Printserver kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Aug 14 21:04:32 Printserver kernel: PIIX3: IDE controller on PCI bus 00 dev 39
> Aug 14 21:04:32 Printserver kernel: PIIX3: chipset revision 0
> Aug 14 21:04:32 Printserver kernel: PIIX3: not 100%% native mode: will probe irqs later
> Aug 14 21:04:32 Printserver kernel:     ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:pio
> Aug 14 21:04:32 Printserver kernel:     ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pio
> Aug 14 21:04:32 Printserver kernel: hda: QUANTUM FIREBALL SE6.4A, ATA DISK drive
> Aug 14 21:04:32 Printserver kernel: hdb: QUANTUM BIGFOOT2100A, ATA DISK drive
> Aug 14 21:04:32 Printserver kernel: hdc: Conner Peripherals 420MB - CFS420A, ATA DISK drive
> Aug 14 21:04:32 Printserver kernel: hdd: QUANTUM MAVERICK 540A, ATA DISK drive
> Aug 14 21:04:32 Printserver kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Aug 14 21:04:32 Printserver kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Aug 14 21:04:32 Printserver kernel: hda: 12594960 sectors (6449 MB) w/80KiB Cache, CHS=784/255/63, (U)DMA
> Aug 14 21:04:32 Printserver kernel: hdb: 4127760 sectors (2113 MB) w/87KiB Cache, CHS=1023/64/63, DMA
> Aug 14 21:04:32 Printserver kernel: hdc: 832608 sectors (426 MB) w/64KiB Cache, CHS=826/16/63, DMA
> Aug 14 21:04:32 Printserver kernel: hdd: 1057392 sectors (541 MB) w/98KiB Cache, CHS=1049/16/63, DMA
> Aug 14 21:04:32 Printserver kernel: Partition check:
> Aug 14 21:04:32 Printserver kernel:  hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
> Aug 14 21:04:32 Printserver kernel:  hdb: hdb1 hdb2 < hdb5 >
> Aug 14 21:04:33 Printserver kernel:  hdc: hdc1
> Aug 14 21:04:33 Printserver kernel:  hdd:hdd: timeout waiting for DMA
> Aug 14 21:04:33 Printserver kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> Aug 14 21:04:33 Printserver kernel: hdd: irq timeout: status=0x5a { DriveReady SeekComplete DataRequest Index }
> Aug 14 21:04:33 Printserver kernel: hdd: timeout waiting for DMA
> Aug 14 21:04:33 Printserver kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> Aug 14 21:04:33 Printserver kernel: hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> Aug 14 21:04:33 Printserver kernel: hdd: timeout waiting for DMA
> Aug 14 21:04:33 Printserver kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> Aug 14 21:04:33 Printserver kernel: hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> Aug 14 21:04:33 Printserver kernel: hdd: timeout waiting for DMA
> Aug 14 21:04:33 Printserver kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> Aug 14 21:04:33 Printserver kernel: hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> Aug 14 21:04:33 Printserver kernel: hdc: DMA disabled
> Aug 14 21:04:33 Printserver kernel: hdd: DMA disabled
> Aug 14 21:04:33 Printserver kernel: ide1: reset: success
> Aug 14 21:04:33 Printserver kernel: hdd: status error: status=0x00 { }
> Aug 14 21:04:33 Printserver kernel: hdd: drive not ready for command
> Aug 14 21:04:33 Printserver kernel: hdd: status error: status=0x00 { }
> Aug 14 21:04:33 Printserver kernel: hdd: drive not ready for command
> Aug 14 21:04:34 Printserver kernel: hdd: status error: status=0x00 { }
> Aug 14 21:04:34 Printserver kernel: hdd: drive not ready for command
> Aug 14 21:04:34 Printserver kernel: hdd: status error: status=0x00 { }
> Aug 14 21:04:34 Printserver kernel: hdd: drive not ready for command
> Aug 14 21:04:34 Printserver kernel: ide1: reset: success
> Aug 14 21:04:34 Printserver kernel: hdd: status error: status=0x00 { }
> Aug 14 21:04:34 Printserver kernel: end_request: I/O error, dev 16:40 (hdd), sector 0
> Aug 14 21:04:34 Printserver kernel: hdd: drive not ready for command
> Aug 14 21:04:34 Printserver kernel:  unable to read partition table
> 
>   ------------------------------------------------------------------------
> Brug <sslug-netvaerk@xxxxxxxx> til netværksemner