sslug-teknik team mailing list archive

["Lennart Andersen" <lennart@xxxxxxxxxxxx>]

Viken version bruge du? Xsane?

-----Original Message-----
From: toran@xxxxxxxxxxxxxxxxxxx [mailto:toran@xxxxxxxxxxxxxxxxxxx]On
Behalf Of Torben Andersen
Sent: Thursday, August 23, 2001 1:37 PM
To: sslug-teknik@xxxxxxxx
Subject: Re: [TEKNIK] xsane og usbscanner


Tak for hjælpen Lennart, men det virker desværre ikke. Stadigvæk "no devices
found". Min lsmod giver flg:
[root@localhost friheden]# /sbin/lsmod
    Module                  Size  Used by
    scanner                 6304   0  (unused)
    emu10k1                45328   0  (autoclean)
    soundcore               3408   4  (autoclean) [emu10k1]
    sr_mod                 13216   0  (autoclean)
    ppp_async               6256   1  (autoclean)
    ppp_generic            16976   3  (autoclean) [ppp_async]
    hid                    10976   0  (unused)
    input                   3072   0  [hid]
    autofs                  8992   1  (autoclean)
    ipchains               27648   0  (unused)
    ide-scsi                7456   0
    scsi_mod               84448   2  [sr_mod ide-scsi]
    ide-cd                 26304   0
    cdrom                  29088   0  [sr_mod ide-cd]
    nls_iso8859-1           2848   1  (autoclean)
    nls_cp437               4352   1  (autoclean)
    vfat                    8400   1  (autoclean)
    fat                    29824   0  (autoclean) [vfat]
    usb-uhci               19472   0  (unused)
    usbcore                46656   1  [scanner hid usb-uhci]

Er der overhovedet noget at gøre ??

Torben

Lennart Andersen wrote:

> Jeg har en hp scanner og bruger Xsane....
>
> COnfig...
>
> To configure the scanner you must install Xsane from the additional disk (
> or from download)
>
> 1.rpm -i xsane-...
>
> 2.vi /etc/sane.d/hp.conf
>
> to contain the following lines:
>
> /dev/usb/scanner0
> option connect-device
>
> 3.issue the shell command:
>
> modprobe scanner
>
> 4.list the loaded modules with 'lsmod' command. Make sure 'scanner' is
> listed
>
> 5.type  'xsane' and try to scan an image from within this application by
> selecting acquire preview button.
>
>


Brug <sslug-netvaerk@xxxxxxxx> til netværksemner