← Back to team overview

sslug-teknik team mailing list archive

modprobe?

 

Hej,jeg har instaleret debian på en gammel 486 maskine,lavet en ny kerne. Det er den nye kerne der er problemet, ved opstarten skriver den cant loade module, codepage437,850,865, samt en masse andre monduler. Jeg har set efter i configfilen og der har jeg kun valgt følgende ting som modu lCONFIG_DUMMY=m. Hvis jer kører en dmesg siger den følgende

Linux version 2.2.18pre21 (root@alice) (gcc version 2.95.2 20000220 (Debian GNU/
Linux)) #1 Wed Oct 31 18:47:07 CET 2001
Console: colour VGA+ 80x25
Calibrating delay loop... 24.88 BogoMIPS
Memory: 34764k/36864k available (1036k kernel code, 416k reserved, 616k data, 32
k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
CPU: Intel 486 SX/2 stepping 0b
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP]
parport_probe: failed
parport0: no IEEE-1284 device present.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16450
ttyS01 at 0x02f8 (irq = 3) is a 16450
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
hda: WDC AC2540F, ATA DISK drive
hdb: IDE/ATAPI CD-ROM 52XS, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: WDC AC2540F, 515MB w/64kB Cache, CHS=524/32/63
hdb: ATAPI 11X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
PPP BSD Compression module registered
PPP Deflate Compression module registered
Partition check:
hda: hda1 hda2 hda3 < hda5 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 32k freed
Adding Swap: 69516k swap-space (priority -1)
VFS: Disk change detected on device fd(2,0)

Der fortæller den ikke noget om alle de monduler den ikke kan loade

Min boot mappe og lib ser ud som følger.

alice:/boot# ls -al
total 2082
drwxr-xr-x    3 root     root         1024 Oct 31 22:40 .
drwxr-xr-x   19 root     root         1024 Oct 31 22:36 ..
-rw-r--r-- 1 root root 202178 Oct 31 21:23 System.map-2.2.18pre21 -rw-r--r-- 1 root root 272592 Oct 31 11:50 System.map-2.2.19pre17
-rw-r--r--    1 root     root          512 Oct 31 12:18 boot.0300
-rw-r--r--    1 root     root         4568 Oct 31 12:16 boot.b
-rw-r--r--    1 root     root          612 Oct 31 12:16 chain.b
-rw-r--r--    1 root     root         7276 Oct 31 18:34 config-2.2.18pre21
-rw-r--r--    1 root     root        14685 Oct 31 11:50 config-2.2.19pre17
drwxr-xr-x    2 root     root        12288 Oct 31 11:49 lost+found
-rw-------    1 root     root        20992 Oct 31 22:40 map
-rw-r--r--    1 root     root          512 Oct 31 12:16 mbr.b
-rw-r--r--    1 root     root          640 Oct 31 12:16 os2_d.b
-rw-r--r--    1 root     root       571265 Oct 31 21:23 vmlinuz-2.2.18pre21
-rwxr-xr-x    1 root     root      1001473 Oct 31 11:50 vmlinuz-2.2.19pre17



alice:/lib/modules# ls -al
total 6
drwxr-xr-x    4 root     root         1024 Oct 31 22:36 .
drwxr-xr-x    4 root     root         3072 Oct 31 13:27 ..
drwxr-xr-x    3 root     root         1024 Oct 31 22:43 2.2.18pre21
drwxr-xr-x   12 root     root         1024 Oct 31 12:30 2.2.19pre17

Er der nogen der kan hjælpe med dette problem

mvh        Carl Andersen