sslug-teknik team mailing list archive

Thread
Date
Intel 740 grafikkort under XFree86 4.1.0

To: sslug-teknik@xxxxxxxx
From: Steffen <steff@xxxxxxxxx>
Date: Fri, 12 Apr 2002 19:19:55 +0200
Delivered-to: mailing list sslug-teknik@xxxxxxxx
Mailing-list: contact sslug-teknik-help@xxxxxxxx; run by ezmlm
Newsgroups: sslug.teknik
Organization: SSLUG
User-agent: KNode/0.7.1
Hejsa!

Jeg har et Intel 740 grafikkort, men det har aldrig virket ordentligt med
24 bit, det går så langsomt, og man kan især se det når man åbner et 
program, hvor langtid det tager for at tegne et vindue. Og bare man flytter 
vinduerne lidt, så går det i slow-motion på XFree 4.1.0.

Er der andre der har noget der virker med Intel 740/ ?

Her er min XF86Config fil:

-----------------------------------------------------------------------
 
# File generated by anaconda. # 
********************************************************************** # 
Refer to the XF86Config(4/5) man page for details about the format of 
# this file. # 
********************************************************************** 
 
# ********************************************************************** # 
Files section. This allows default font and rgb paths to be set # 
********************************************************************** 
 
Section "Files" 
 
# The location of the RGB database. Note, this is the name of the # file 
minus the extension (like ".txt" or ".db"). There is normally # no need to 
change the default. 
 
RgbPath "/usr/X11R6/lib/X11/rgb" 
 
# Multiple FontPath entries are allowed (they are concatenated together) # 
By default, Red Hat 6.0 and later now use a font server independent of # 
the X server to render fonts. 
 
FontPath "unix/:7100" 
 
EndSection 
 
# ********************************************************************** 
# Server flags section. # 
********************************************************************** 
 
Section "ServerFlags" # Uncomment this to cause a core dump at the spot 
where a signal is # received. This may leave the console in an unusable 
state, but may # provide a better stack trace in the core dump to aid in 
debugging 
 
# NoTrapSignals 
 
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This 
allows clients to receive this key event. 
 
# DontZap 
 
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # 
sequences. This allows clients to receive these key events. 
 
# DontZoom 
EndSection 
 
# Pointer section # 
********************************************************************** 
 
Section "Pointer" 
Protocol "PS/2" 
Device "/dev/psaux" 
 
# For wheel support - can not be used with Emulate3Buttons 
# 
# ZAxisMapping 4 5 
 
# When using XQUEUE, comment out the above two lines, and uncomment 
# the following line. 
# Protocol "Xqueue" 
 
# Baudrate and SampleRate are only for some Logitech mice 
# BaudRate 9600 
# SampleRate 150 
 
# Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout 
is the timeout in milliseconds (default is 50ms) 
Emulate3Buttons 
Emulate3Timeout 50 
 
# ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle 
 
EndSection 
 
# ********************************************************************** 
# Keyboard section # 
********************************************************************** 
 
Section "Keyboard" 
Protocol "Standard" 
 
AutoRepeat 500 5 
 
# when using XQUEUE, comment out the above line, and uncomment the 
# following line 
# Protocol "Xqueue" 
 
# Let the server do the NumLock processing. This should only be 
# required when using pre-R6 clients 
# ServerNumLock 
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # 
Xleds 1 2 3 
 
# To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to 
Compose, and ScrollLock key to ModeLock: 
 
LeftAlt Meta 
RightAlt Meta 
ScrollLock Compose 
RightCtl Control 
 
# To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable 
 
# To customise the XKB settings to suit your keyboard, modify the # lines 
below (which are the defaults). For example, for a non-U.S. # keyboard, you 
will probably want to use: 
# XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can 
use: 
# XkbModel "microsoft" 
# # Then to change the language, change the Layout setting. # For example, a 
german layout can be obtained with: 
# XkbLayout "de" 
# or: 
# XkbLayout "de" 
# XkbVariant "nodeadkeys" 
# # If you'd like to switch the positions of your capslock and 
# control keys, use: 
# XkbOptions "ctrl:swapcaps" 
# # If you'd like to disable the capslock key, use: # XkbOptions 
"ctrl:nocaps" 
 
 
XkbRules "xfree86" 
XkbModel "pc105" 
XkbLayout "dk" 
XkbVariant "basic" 
#XkbOptions "" 
EndSection 
 
# ********************************************************************** 
# Monitor section # 
********************************************************************** 
 
# Any number of monitor sections may be present 
Section "Monitor" 
Identifier "Generic Monitor" 
VendorName "Unknown" 
ModelName "Unknown" 
# HorizSync 31.5 
# VertRefresh 60 
HorizSync 35.15 
VertRefresh 55-65 
 
# ModeLine "640x480" 25.175 640 664 760 800 # 480 491 493 525 
 
# 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 
600 601 603 625 
 
EndSection 
 
Section "Monitor" 
Identifier "Probed Monitor" 
VendorName "Unknown" 
ModelName "Unknown" 
HorizSync 46.876 
VertRefresh 75.121 ModeLine "800x600" 48.002 800 832 928 1024 600 604 608 
624 -HSync -VSync EndSection 
 
 
Section "Monitor" Identifier "Smile CA6748SL/CB6748SL" 
VendorName "Unknown" 
ModelName "Unknown" 
 
# HorizSync is in kHz unless units are specified. # HorizSync may be a comma 
separated list of discrete values, or a # comma separated list of ranges of 
values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S 
# USER MANUAL FOR THE CORRECT NUMBERS. 
 
HorizSync 30.0-86.0 
 
# VertRefresh is in Hz unless units are specified. # VertRefresh may be a 
comma separated list of discrete values, or a # comma separated list of 
ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR 
MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. 
 
VertRefresh 50.0-150.0 
 
# Modes can be specified in two formats. A compact one-line format, or # a 
multi-line format. 
 
# These two are equivalent 
 
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace 
 
# Mode "1024x768i" 
# DotClock 45 
# HTimings 1024 1048 1208 1264 
# VTimings 768 776 784 817 
# Flags "Interlace" 
# EndMode 
 
# This is a set of standard mode timings. Modes that are out of monitor spec 
# are automatically deleted by the server (provided the HorizSync and # 
VertRefresh lines are correct), so there's no immediate need to # delete 
mode timings (unless particular mode timings don't work on your # monitor). 
With these modes, the best standard mode that your monitor # and video card 
can support for a given resolution is automatically # used. 
 
# Low-res Doublescan modes # If your chipset does not support doublescan, 
you get a 'squashed' # resolution like 320x400. 
 
# --320x200-# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline 
"320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 
Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 
400 240 245 246 262 Doublescan 
# 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 
240 244 246 262 Doublescan 
# --400x300-# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine 
"400x300" 18 400 416 448 512 300 301 302 312 Doublescan 
# 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 
301 303 314 Doublescan 
# 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 
319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio 
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan 
# 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 
300 301 303 314 Doublescan 
# 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 
301 303 314 Doublescan 
# 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 
300 319 322 333 Doublescan 
 
# Normal video modes 
 
# -- 512x384 
# 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 
384 385 388 404 -HSync -VSync 
# 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 
385 388 404 -HSync -VSync 
 
# -- 640x400 - 
# 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 
400 409 411 450 
# 640x400 @ 85 Hz, 37.86 kHz hsync Modeline "640x400" 31.5 640 672 736 832 
400 401 404 445 -HSync +VSync 
 
# --- 640x480 -- 
# 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 
480 491 493 525 
# 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 
480 488 491 521 
# 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 
480 481 484 500 -HSync -VSync 
# 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x480" 36 640 696 752 832 480 
481 484 509 -HSync -VSync 
# 640x480 @ 100 Hz, 53.01 kHz hsync Modeline "640x480" 45.8 640 672 768 864 
480 488 494 530 -HSync -VSync 
 
# --- 800x600 -- 
# 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 
600 601 603 625 
# 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 
601 605 628 +hsync +vsync 
# 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 
637 643 666 +hsync +vsync 
# 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 
600 616 621 657 -HSync -VSync 
# 800x600 @ 100 Hz, 64.02 kHz hsync Modeline "800x600" 69.65 800 864 928 
1088 600 604 610 640 -HSync -VSync 
 
# --- 1024x768 -- 
# 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 
1344 768 771 777 806 -hsync -vsync 
# 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 
1328 768 771 777 806 -hsync -vsync 
# 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 
1360 768 784 787 823 
# 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 
1408 768 782 788 822 -HSync -VSync 
# 1024x768 @ 100Hz, 80.21 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 
1440 768 771 781 802 -HSync -VSync 
 
# --- 1152x864 -- 
# 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 
1680 864 868 876 892 -HSync -VSync 
# 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 
1474 864 865 875 895 
# 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 
1552 864 864 876 908 
# 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 
1776 864 864 876 908 
# 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 
1312 1536 864 866 885 902 -HSync -VSync 
 
# -- 1280x1024 - 
# 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 
1712 1024 1025 1028 1054 
# 1280x1024 @ 70 Hz, 74.59 kHz hsync Modeline "1280x1024" 126.5 1280 1312 
1472 1696 1024 1032 1040 1068 -HSync -VSync 
# 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline "1280x1024" 135 1280 1312 1456 
1712 1024 1027 1030 1064 
# 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 
1664 1024 1027 1030 1064 
# 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 
1504 1728 1024 1025 1028 1072 +HSync +VSync 
# 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 
1440 1696 1024 1031 1046 1072 -HSync -VSync 
 
# -- 1400x1050 - 
# 1400x1050 @ 60Hz, 65.8 kHz hsync Modeline "1400x1050" 129 1400 1464 1656 
1960 1050 1051 1054 1100 +HSync +VSync 
 
# 1400x1050 @ 70Hz, 76.8 kHz hsync Modeline "1400x1050" 151 1400 1464 1656 
1960 1050 1051 1054 1100 +HSync +VSync 
 
# 1400x1050 @ 75Hz, 82.3 kHz hsync Modeline "1400x1050" 162 1400 1464 1656 
1960 1050 1051 1054 1100 +HSync +VSync 
 
# 1400x1050 @ 85Hz, 93.2 kHz hsync Modeline "1400x1050" 184 1400 1464 1656 
1960 1050 1051 1054 1100 +HSync +VSync 
 
# -- 1600x1200 - 
# 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 
2160 1200 1201 1204 1250 +HSync +VSync 
# 1600x1200 @ 70 Hz, 87.50 kHz hsync Modeline "1600x1200" 189 1600 1664 1856 
2160 1200 1201 1204 1250 -HSync -VSync 
# 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 
1856 2160 1200 1201 1204 1250 +HSync +VSync 
# 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 
1808 2080 1200 1204 1207 1244 +HSync +VSync 
 
# -- 1800x1400 -- 
 
# 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 
2392 1440 1441 1444 1490 +HSync +VSync 
# 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 
2392 1440 1441 1444 1490 +HSync +VSync 
 
# -- 1920x1200 - 
 
# 1920x1200 @ 70Hz, 87.50 KHz hsync Modeline "1920x1200" 230 1920 1936 2096 
2528 1200 1201 1204 1250 +HSync +VSync 
 
EndSection 
 
# ********************************************************************** 
# Graphics device section # 
********************************************************************** 
 
Section "Device" Identifier "Generic VGA Card" 
VendorName "Unknown" 
BoardName "Unknown" 
Chipset "generic" 
EndSection 
 
 
Section "Device" Identifier "Winfast S900 i740 AGP 8MB" 
#Option "no_accel" 
#Option "sw_cursor" 
#Option "hw_cursor" 
#Option "sgram" 
#Option "sdram" 
VideoRam 8192 
EndSection 
 
 
# ********************************************************************** 
# Screen section # 
********************************************************************** 
 
# The kernel framebuffer server 
Section "Screen" 
Driver "fbdev" 
Device "Generic VGA Card" 
Monitor "Probed Monitor" 
Subsection "Display" 
# Depth 16 
Depth 16 
Modes "default" 
EndSubsection 
EndSection 
 
# The 16-color VGA server 
Section "Screen" 
Driver "vga16" 
Device "Generic VGA Card" Monitor "Smile CA6748SL/CB6748SL" 
Subsection "Display" 
Modes "640x480" "800x600" 
ViewPort 0 0 
EndSubsection 
EndSection 
 
# The Mono server 
Section "Screen" 
Driver "vga2" 
Device "Generic VGA Card" Monitor "Smile CA6748SL/CB6748SL" 
Subsection "Display" 
Modes "640x480" "800x600" 
ViewPort 0 0 
EndSubsection 
EndSection 
 
 
# The svga server 
Section "Screen" 
Driver "svga" Device "Winfast S900 i740 AGP 8MB" Monitor "Smile 
CA6748SL/CB6748SL" DefaultColorDepth 16 
 
Subsection "Display" 
Depth 16 
Modes "1024x768" 
ViewPort 0 0 
EndSubsection 
EndSection 
 
# The accel server 
Section "Screen" 
Driver "accel" Device "Winfast S900 i740 AGP 8MB" Monitor "Smile 
CA6748SL/CB6748SL" DefaultColorDepth 16 
 
Subsection "Display" 
Depth 16 
Modes "1024x768" 
ViewPort 0 0 
EndSubsection 
EndSection

---------------------------------------------------------------------------------

/Steffen
Follow ups

Re: Intel 740 grafikkort under XFree86 4.1.0
From: Anna Jonna Armannsdottir, 2002-04-13