sslug-teknik team mailing list archive

[David List <david@xxxxxxxxxxxx>]

Tuesday 02 July 2002 13:09, Harry wrote in 
<1025608179.17286.1.camel@localhost.localdomain> to sslug.teknik:

> Nogen der har erfaring med det kort under linux.

Ikke lige præcis med det nævnte kort, men Hauppauge WinTV Radio virker fint 
under SuSE 7.3 (og formentlig 8.0) og Mandrake 8.1 (og formentlig Mandrake 
8.2). Dette kort har bt878 chip.
Jeg får følgende i dmesg:

Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.72 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 9 for device 00:0d.0
PCI: Sharing IRQ 9 with 00:08.0
PCI: Sharing IRQ 9 with 00:0d.1
bttv0: Bt878 (rev 2) at 00:0d.0, irq: 9, latency: 32, memory: 0xf9000000
bttv0: subsystem: 0070:13eb  =>  Hauppauge WinTV  =>  card=10
bttv0: model: BT878(Hauppauge new (bt878)) [autodetected]
bttv0: Hauppauge msp34xx: reset line init
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=61344, tuner=Philips FM1216 (5), radio=yes
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3410D-B4, has NICAM support
msp3410: daemon started
bttv0: i2c attach [MSP3410D-B4]
i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: 
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
bttv0: i2c attach [Philips PAL]
i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 1).
bttv0: PLL: 28636363 => 35468950 ... ok

-- 
Med venlig hilsen / Best regards,
David List