sslug-teknik team mailing list archive

["Atte André Jensen" <atte@xxxxxxxxxx>]

Hejsa

Under opstarten bliver PCMCIA kortet i min laptop fundet fint, men når
maskinen kommer op, er eth0 ikke oppe. Jeg kan bare smaske det op med
ifconfig eth0, men det skal jo selv konfigurere sig. Jeg er ikke særligt
meget inde i /etc/rc* (debian), men jeg gætter meget på at problemet er
noget med rækkefølgen af modulerne for PCMCIA support og for selve
netkortet. Er der nogen som gider kikke på outputtet fra dmesg og komme
med et gpdt råd:

Linux version 2.2.20 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 01f00000 @ 00100000 (usable)
Detected 132634 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 264.60 BogoMIPS
Memory: 29752k/32768k available (1756k kernel code, 412k reserved, 696k data, 152k init)
Dentry hash table entries: 4096 (order 3, 32k)
Buffer cache hash table entries: 32768 (order 5, 128k)
Page cache hash table entries: 8192 (order 3, 32k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfd930
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 32768 bhash 32768)
Starting kswapd v 1.5 
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16450
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
PIIX: IDE controller on PCI bus 00 dev 08
PIIX: not 100% native mode: will probe irqs later
PIIX: neither IDE port enabled (BIOS)
hda: IBM-DTCA-24090, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DTCA-24090, 3909MB w/468kB Cache, CHS=993/128/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
              This machine does not have any IBM MCA-bus
              or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect: 
3ware Storage Controller device driver for Linux v1.02.00.008.
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 96764k swap-space (priority -1)
isapnp: No Plug & Play device found
Linux PCMCIA Card Services 3.1.33
  kernel build: 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002
  options:  [pci] [cardbus] [apm]
No PCI interrupt routing table!
Intel ISA/PCI/CardBus PCIC probe:
  TI 1130 rev 02 PCI-to-CardBus at slot 00:02, mem 0x10211000
    host opts [0]: [ring] [isa irq] [no pci irq] [lat 168/176] [bus 1/3]
    host opts [1]: [ring] [isa irq] [no pci irq] [lat 168/176] [bus 4/6]
    ISA irqs (scanned) = 5,7,9,10 status change on irq 10
cs: memory probe 0xa0000000-0xa0ffffff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x1a0-0x1af 0x268-0x26f 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x01b0-0x0267: clean.
cs: IO port probe 0x0270-0x03b7: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: excluding 0xa68-0xa6f
cs: IO port probe 0x0a70-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
eth0: NE2000 (DL10022 rev 05): io 0x300, irq 5, hw_addr 00:E0:98:9D:2A:C7

-- 
Atte