sslug-teknik team mailing list archive
-
sslug-teknik team
-
Mailing list archive
-
Message #56526
GeForce MX 400
Hejsa.
Jeg har købt en computer (2GHz, ½GB RAM,
Soltek 85ERV bundkort) men desværre har
jeg problemer med grafikkortet, et
GeForce2 MX400 64MB TV-out.
Skærmen fryser tilsyneladende umotiveret.
(men jeg kan stadig bevæge musen)
Jeg har testet rammen med memtest86 og
bygget kerner med -j uden problemer, så
jeg tror det er grafikkortet.
Jeg bruger nvivias drivere v.1.0-3123.
Er der nogen der har forslag til hvordan
jeg kan undersøge det nærmere?
På forhånd tak.
Min XF86Config er herunder:
##########################################################################
# Sample XF86Config file for NVIDIA XFree86 drivers.
#
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
# Be sure to replace the monitor values with correct values for your
# monitor!
##########################################################################
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# FontPath "unix/:-1"
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/TrueType"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
##########################################################################
# Server flags section.
##########################################################################
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but
may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort
sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
##########################################################################
# Input devices
##########################################################################
#
# Keyboard section
#
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
EndSection
#
# Pointer section
#
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
# ZAxisMapping 4 5
EndSection
##########################################################################
# Module section
##########################################################################
Section "Module"
Load "dbe"
# Load the glx module.
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
##########################################################################
# Monitor section
##########################################################################
Section "Monitor"
Identifier "17tommer"
VendorName "SONY"
ModelName "Trinitron Multiscan 200 SX"
# be sure to replace these values with values appropriate for your
# monitor!
HorizSync 28-49
VertRefresh 43-72
# HorizSync 31-82
# VertRefresh 55-120
EndSection
##########################################################################
# Graphics device section(s)
##########################################################################
#Section "Device"
# Identifier "NV AGP"
# VendorName "nvidia"
# Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
# BusID "PCI:1:0:0"
#EndSection
#Section "Device"
# Identifier "NV PCI"
# VendorName "nvidia"
# Driver "nvidia"
# # update this with the PCI id of your card. Consult the output
# # of the 'lspci' command.
# BusID "PCI:0:13:0"
#EndSection
Section "Device"
Identifier "NV AGP TwinView"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
#NVidia options - 26/9-02
Option "NoLogo" "yes"
Option "CursorShadow" "yes"
Option "UseEdidFreqs" "yes"
Option "TVStandard" "PAL-B"
Option "NvAGP" "1"
# sample twinview setup
Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct
values
# for your monitor!
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "Clone" # "RightOf" "LeftOf"
"Above" "Below" "Clone"
Option "MetaModes" "1024x768,1024x768;
800x600,800x600"
Option "ConnectedMonitor" "crt,TV"
EndSection
##########################################################################
# Screen sections
##########################################################################
#
# screen section for an nvidia AGP card
Section "Screen"
Identifier "NV AGP TwinView"
Device "NV AGP TwinView"
Monitor "17tommer"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubsection
EndSection
#
# screen section for an nvidia PCI card
#
#Section "Screen"
# Identifier "Screen PCI"
# Device "NV PCI"
# Monitor "MyMonitor"
# DefaultColorDepth 24
# Subsection "Display"
# Depth 8
# Modes "1280x1024" "1024x768" "800x600" "640x400"
# EndSubsection
# Subsection "Display"
# Depth 16
# Modes "1280x1024" "1024x768" "800x600" "640x480"
# EndSubsection
# Subsection "Display"
# Depth 24
# Modes "1280x1024" "1024x768" "800x600" "640x480"
# EndSubsection
#EndSection
#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
#Section "Screen"
# Identifier "Screen AGP TwinView"
# Device "NV AGP TwinView"
# Monitor "MyMonitor"
# DefaultColorDepth 24
# Subsection "Display"
# Depth 8
# Modes "1280x1024" "1024x768" "800x600" "640x400"
# EndSubsection
# Subsection "Display"
# Depth 16
# Modes "1280x1024" "1024x768" "800x600" "640x480"
# EndSubsection
# Subsection "Display"
# Depth 24
# Modes "1280x1024" "1024x768" "800x600" "640x480"
# EndSubsection
#EndSection
##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################
#
# just one agp card
#
#Section "ServerLayout"
# Identifier "AGP"
# Screen "Screen AGP"
# InputDevice "Mouse1" "CorePointer"
# InputDevice "Keyboard1" "CoreKeyboard"
#EndSection
#
# just one pci card
#
#Section "ServerLayout"
# Identifier "PCI"
# Screen "Screen PCI"
# InputDevice "Mouse1" "CorePointer"
# InputDevice "Keyboard1" "CoreKeyboard"
#EndSection
#
# 2 cards, non twinview
#
#Section "ServerLayout"
# Identifier "Both"
# Screen "Screen AGP"
# Screen "Screen PCI" LeftOf "Screen AGP"
# InputDevice "Mouse1" "CorePointer"
# InputDevice "Keyboard1" "CoreKeyboard"
#EndSection
#
# just one agp twinview card
#
#Section "ServerLayout"
# Identifier "AGPTwinView"
# Screen "Screen AGP TwinView"
# InputDevice "Mouse1" "CorePointer"
# InputDevice "Keyboard1" "CoreKeyboard"
#EndSection
#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
#Section "ServerLayout"
# Identifier "BothTwinView"
# Screen "Screen AGP TwinView"
# Screen "Screen PCI" LeftOf "Screen AGP TwinView"
# InputDevice "Mouse1" "CorePointer"
# InputDevice "Keyboard1" "CoreKeyboard"
#EndSection
--
Venlig hilsen/Kind regards Poul Anker Gensmann
Contact info at http://pa.gensmann.com
Follow ups
