sslug-teknik team mailing list archive

["Asbj�orell" <atm@xxxxxxxxxxx>]

Det gav intet i log'en... :( Her er min kernel boot log:

mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd83c, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:02.0
PCI: Found IRQ 14 for device 00:02.2
PCI: Sharing IRQ 14 with 00:03.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Card 'Crystal Audio'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 352 slots per queue, batch=88
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 11
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
hdc: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 253k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
PCI: Found IRQ 9 for device 00:12.0
PCI: Sharing IRQ 9 with 01:01.0
PCI: Found IRQ 10 for device 00:14.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2944 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

blk: queue c17e4a14, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:2:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:2:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
Linux version 2.4.18-17.8.0custom (root@localhost.localdomain) (gcc version
3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #3 Tue Oct 29 08:12:24 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bffd8c0 (usable)
 BIOS-e820: 000000000bffd8c0 - 000000000bffff00 (ACPI data)
 BIOS-e820: 000000000bffff00 - 000000000c000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49149
zone(0): 4096 pages.
zone(1): 45053 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=linux ro
BOOT_FILE=/boot/vmlinuz-2.4.18-17.8.0custom root=LABEL=/
Initializing CPU#0
Detected 348.472 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 692.93 BogoMIPS
Memory: 188984k/196596k available (1285k kernel code, 5692k reserved, 945k
data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=23814 max_file_pages=0 max_inodes=0 max_dentries=23814
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd83c, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:02.0
PCI: Found IRQ 14 for device 00:02.2
PCI: Sharing IRQ 14 with 00:03.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Card 'Crystal Audio'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 352 slots per queue, batch=88
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 11
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
hdc: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 253k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
PCI: Found IRQ 9 for device 00:12.0
PCI: Sharing IRQ 9 with 01:01.0
PCI: Found IRQ 10 for device 00:14.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2944 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

blk: queue c17e4a14, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:2:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:2:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:2:0): Unexpected busfree in Data-out phase
SEQADDR == 0x1ae
ahc_intr: HOST_MSG_LOOP bad phase 0x0
blk: queue c17e4a14, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: IBM       Model: DDYS-T18350N      Rev: S96H
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue c1967a14, I/O limit 4095Mb (mask 0xffffffff)
(scsi1:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
scsi1:A:0:0: Tagged Queuing enabled.  Depth 253
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
Partition check:
 sda: sda1 sda2 sda3 sda4 < sda5 >
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 13:13:00 Oct 28 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 00:02.2 (0000 -> 0001)
PCI: Found IRQ 14 for device 00:02.2
PCI: Sharing IRQ 14 with 00:03.0
usb-uhci.c: USB UHCI at I/O 0x1000, IRQ 14
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,2), internal journal
Adding Swap: 522104k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.



"Mogens Kjaer" <mk@xxxxxx> skrev i en meddelelse
news:3DC1297F.5010905@xxxxxx...
> Asbjørn Morell wrote:
> > Den står der i forvejen... Redhat finder fint mine SCSI controlleren,
men
> > finder ikke båndstationen. Båndstationen står som den skal i SCSI
bios'en.
>
> Hjælper:
>
> modprobe st
>
> Skriver den noget i /var/log/messages efter denne?
>
> Mogens
> --
> Mogens Kjaer, Carlsberg A/S, Computer Department
> Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark
> Phone: +45 33 27 53 25, Fax: +45 33 27 47 08
> Email: mk@xxxxxx Homepage: http://www.crc.dk
>
>
>