sslug-teknik team mailing list archive

[Frank Vestergaard Pedersen <sslug@xxxxxxxxxxxx>]

Jeg er ikke sikker men i følge min "man cdrecord" skulle du vist gøre sådan:

cdrecord  -v -multi -dao -data dev=0,4,0 speed=4  /backup/image.iso

tror jeg da nok !!

/Frank

Onsdag 11 december 2002 14:17 skrev du:
> Når jeg brænder med cdrecord fra kommando linien sådan her:
>
> cdrecord  -v -mode2 -dao dev=0,4,0 speed=4  /backup/image.iso
>
> (det samme sker hvis jeg prøver -xa2 istedet).
>
> får jeg:
> Cdrecord 1.11a39 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
> Schilling TOC Type: 1 = CD-ROM
> scsidev: '0,4,0'
> scsibus: 0 target: 4 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.7'
> atapi: 0
> Device type    : Removable CD-ROM
> Version        : 2
> Response Format: 2
> Capabilities   : SYNC LINKED
> Vendor_info    : 'PLEXTOR '
> Identifikation : 'CD-R   PX-R412C '
> Revision       : '1.06'
> Device seems to be: Generic mmc CD-R.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : MMC SWABAUDIO
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R Drive buf size : 1168944 = 1141 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data   699 MB
> Total size:      704 MB (69:48.09) = 314107 sectors
> Lout start:      704 MB (69:50/07) = 314107 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is unrestricted
>   Is not erasable
>   ATIP start of lead in:  -11077 (97:34/23)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 359849 Blocks current: 359666 Blocks remaining: 45559
> Starting to write CD/DVD at speed 4 in real SAO mode for single session.
> Last chance to quit, starting real write    0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Sending CUE sheet...
> Writing pregap for track 1 at 33
> cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 00 00 21 00 00 1B 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 63072
> cmd finished after 0.073s timeout 200s
> write track pad data: error after 0 bytes
> BFree: 1141 K BSize: 1141 K
> Starting new track at sector: 183
> Track 01:    0 of  699 MB written.cdrecord: Input/output error.
> write_g1: scsi sendcmd: no error CDB:  2A 00 00 00 00 B7 00 00 1B 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 63072
> cmd finished after 0.002s timeout 200s
>
> write track data: error after 0 bytes
> ^MSense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> Writing  time:   15.073s
> Average write speed 824.4x.
> Fixating...
> Fixating time:    0.002s
> cdrecord: fifo had 64 puts and 1 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.