sslug-teknik team mailing list archive

[Torben Andersen <the.beauty@xxxxxxxxxx>]

Kim Nielsen wrote:

> Her er min konfig:
Tak til Kim for hans config fil. Jeg har ændret min XF86config-4 efter 
hans mønster og X starter da også fint op. Jeg ved imidlertidig ikke, 
hvordan jeg omdirigerer til tv'et. Jeg mener, at kunne huske, at man med 
en tastaturkombination kan skifte monitor/screen. Jeg har forsøgt med 
CTRL-ALT +/-, men det skiftede kun opdateringsfrekvens på min monitor, 
men sendte det ikke ud til tv-out. Skelner man mellem at skifte 
skærmdata på den enkelte screen og at skifte "monitor" ?? Jeg har 
vedlagt min config fil, hvis nogen har overskud til at finde en eventuel 
fejl.

Iøvrigt Glædelig jul allesammen :-)

Torben

# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
	Screen      1  "TV0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:7100"

EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
	Load "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"logicordless"
	Option	"XkbLayout"	"dk"
	Option	"XkbVariant"	"basic"
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
	Identifier	"Mouse0"
	# Modified by mouseconfig
	Driver		"mouse"
	Option		"Device"		"/dev/mouse"
	Option		"Protocol"		"IMPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   30-96
        VertRefresh 50-160
        Option "dpms"

        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
        Modeline "1400x1050"  129   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 70Hz, 76.8 kHz hsync
        Modeline "1400x1050"  151   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 75Hz, 82.3 kHz hsync
        Modeline "1400x1050"  162   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 85Hz, 93.2 kHz hsync
        Modeline "1400x1050"  184   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Monitor"
    Identifier  "TV"
    VendorName   "SONY"
    HorizSync 30-50
        VertRefresh 60
EndSection

Section "Device"
	# no known options
	Identifier   "NVIDIA GeForce 3 (generic)"
        Driver       "nvidia"
        VendorName   "NVIDIA GeForce 3 (generic)"
        BoardName     "NVIDIA GeForce 3 (generic)"
        Option       "NvAGP" "4"
        #BusID
	
EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "NVIDIA GeForce 3 (generic)"
        Monitor      "Monitor0"
	DefaultDepth	24

	Subsection "Display"
        	Depth       24
                Modes       "1280x1024" "1280x1024" 
	EndSubsection

EndSection

Section "Screen"
    Identifier "TV0"
    Device     "NVIDIA GeForce 3 (generic)"
    Monitor    "TV"
    DefaultColorDepth 24

    Option "TVStandard"       "PAL-G"
    Option "ConnectedMonitor" "TV"
    Option "TVOutFormat"      "COMPOSITE"

    SubSection "Display"
        Depth     24
        Modes   "640x480"
    EndSubSection
EndSection


Section "DRI"
	Mode 0666
EndSection