sslug-teknik team mailing list archive

[Axel Egeløv <axel.egelov@xxxxxxxxxxxxx>]

Jeg har brug for hjælp til at få min optiske, trådløse USB mus til at fungere.
Jeg har Debian 3.0r0, den stabile version. Musen jeg har er for nylig købt i 
ALDI, den er lavet i Kina, men jeg kan ikke finde noget om den på nettet når 
jeg søger under dens model nummer: MWP5016B. Jeg har prøvet, at bruge den 
under Mandrake 9.0. Også dette system kan se musen, men her reagerer 
"muse-pilen" heller ikke. Under win2000 fungere den med de drivere, der 
ligger på systemet. 
Når jeg kører lsmod får jeg:
Module                  Size  Used by    Not tainted
hid                    17664   0  (unused)
mousedev                3808   0  (unused)
usbmouse                1792   0  (unused)
nls_cp437               4384  30  (autoclean)
usb-storage            48000   0  (unused)
vfat                    9276  15
romfs                   3520   0  (unused)
msdos                   4860   0  (unused)
fat                    29080   0  [vfat msdos]
isofs                  24224   0  (unused)
autofs                  8932   1
usbserial              17824   0  (unused)
ppp_synctty             4512   0  (unused)
ppp_async               5984   0  (unused)
ppp_generic            18152   0  [ppp_synctty ppp_async]
loop                    8016   0  (unused)
floppy                 44832   0
usbkbd                  2912   0  (unused)
keybdev                 1664   0  (unused)
input                   3328   0  [hid mousedev usbmouse usbkbd keybdev]
scanner                 8448   0  (unused)
printer                 5472   0
apm                     8892   0
nls_cp865               4384   0  (unused)
sg                     27972   0  (unused)
slhc                    4352   0  [ppp_generic]
linear                  1344   0  (unused)
md                     43296   0  [linear]
ide-floppy             11040   0
af_packet              11432   0  (unused)
rtc                     5368   0  (autoclean)
usb-uhci               21028   0  (unused)
usbcore                48192   0  [hid usbmouse usb-storage usbserial usbkbd 
scanner printer usb-uhci]
es1371                 25952   0
soundcore               3556   4  [es1371]
ac97_codec              9376   0  [es1371]
gameport                1484   0  [es1371]
ide-scsi                7392   0
scsi_mod               84984   2  [usb-storage sg ide-scsi]
parport_pc             21960   1  (autoclean)
lp                      5952   0  (autoclean)
parport                22944   1  (autoclean) [parport_pc lp]
unix                   13316  84  (autoclean)
ide-disk                6592  22  (autoclean)
ide-probe-mod           7968   0  (autoclean)
ide-mod               129420  22  (autoclean) [ide-floppy ide-scsi ide-disk 
ide-probe-mod]
ext2                   30400   6  (autoclean)
ext3                   56544   0  (autoclean)
jbd                    34968   0  (autoclean) [ext3]

cat XF86config-4 giver bl.a:
Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "PS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMapping"          "4 5"
EndSection

Section "InputDevice"
        Identifier      "Generic Mouse"
        Driver          "mouse"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMapping"          "4 5"
EndSection

dmesg giver bl.a:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 11:55:11 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:04.2
PCI: Sharing IRQ 5 with 00:04.3
PCI: Sharing IRQ 5 with 00:0d.0
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:04.3
PCI: Sharing IRQ 5 with 00:04.2
PCI: Sharing IRQ 5 with 00:0d.0
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x62a/0x0) is not claimed by any active driver.
hub.c: USB new device connect on bus2/1, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: USB new device connect on bus2/2, assigned device number 3
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: USB new device connect on bus2/2/1, assigned device number 4
usb.c: USB device 4 (vend/prod 0x43d/0xc) is not claimed by any active driver.
Real Time Clock Driver v1.10e
ide-floppy driver 0.97.sv
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: linear personality registered as nr 1
CSLIP: code copyright 1989 Regents of the University of California
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
usb.c: registered new driver usblp
usb.c: ignoring set_interface for dev 4, iface 0, alt 0
printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0
printer.c: v0.8:USB Printer Device Class driver
usb.c: registered new driver usbscanner
scanner.c: 0.4.6:USB Scanner Driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
inserting floppy driver for 2.4.18-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
usb.c: registered new driver usb_mouse
usb-uhci.c: interrupt, status 2, frame# 1762
usb.c: error getting string descriptor 0 (error=-75)
input0: USB HIDBP Mouse 062a:0000 on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers

Hvad mangler ? Ifølge hvad jeg kan finde på nettet burde den fungere, men det 
gør den overhovedet ikke.

Med venlig hilsen
Axel Egeløv