sslug-teknik team mailing list archive

[Torben Andersen <the.beauty@xxxxxxxxxx>]

Axel Egeløv wrote:

> Jeg har brug for hjælp til at få min optiske, trådløse USB mus til at fungere.
> Jeg har Debian 3.0r0, den stabile version. Musen jeg har er for nylig købt i 
> ALDI, den er lavet i Kina, men jeg kan ikke finde noget om den på nettet når 
> jeg søger under dens model nummer: MWP5016B. Jeg har prøvet, at bruge den 
> under Mandrake 9.0. Også dette system kan se musen, men her reagerer 
> "muse-pilen" heller ikke. Under win2000 fungere den med de drivere, der 
> ligger på systemet. 
>  
Jeg havde et tilsvarende problem, som viste sig at kunne løses i biosen. 
Der skulle slås en USB option til (HID-support tror jeg nok). Hvis dette 
kan være et problem med min (næsten) nye puter, kan det også være et 
problem for dig.

Held og lykke.

Torben

> Når jeg kører lsmod får jeg:
> Module                  Size  Used by    Not tainted
> hid                    17664   0  (unused)
> mousedev                3808   0  (unused)
> usbmouse                1792   0  (unused)
> nls_cp437               4384  30  (autoclean)
> usb-storage            48000   0  (unused)
> vfat                    9276  15
> romfs                   3520   0  (unused)
> msdos                   4860   0  (unused)
> fat                    29080   0  [vfat msdos]
> isofs                  24224   0  (unused)
> autofs                  8932   1
> usbserial              17824   0  (unused)
> ppp_synctty             4512   0  (unused)
> ppp_async               5984   0  (unused)
> ppp_generic            18152   0  [ppp_synctty ppp_async]
> loop                    8016   0  (unused)
> floppy                 44832   0
> usbkbd                  2912   0  (unused)
> keybdev                 1664   0  (unused)
> input                   3328   0  [hid mousedev usbmouse usbkbd keybdev]
> scanner                 8448   0  (unused)
> printer                 5472   0
> apm                     8892   0
> nls_cp865               4384   0  (unused)
> sg                     27972   0  (unused)
> slhc                    4352   0  [ppp_generic]
> linear                  1344   0  (unused)
> md                     43296   0  [linear]
> ide-floppy             11040   0
> af_packet              11432   0  (unused)
> rtc                     5368   0  (autoclean)
> usb-uhci               21028   0  (unused)
> usbcore                48192   0  [hid usbmouse usb-storage usbserial usbkbd 
> scanner printer usb-uhci]
> es1371                 25952   0
> soundcore               3556   4  [es1371]
> ac97_codec              9376   0  [es1371]
> gameport                1484   0  [es1371]
> ide-scsi                7392   0
> scsi_mod               84984   2  [usb-storage sg ide-scsi]
> parport_pc             21960   1  (autoclean)
> lp                      5952   0  (autoclean)
> parport                22944   1  (autoclean) [parport_pc lp]
> unix                   13316  84  (autoclean)
> ide-disk                6592  22  (autoclean)
> ide-probe-mod           7968   0  (autoclean)
> ide-mod               129420  22  (autoclean) [ide-floppy ide-scsi ide-disk 
> ide-probe-mod]
> ext2                   30400   6  (autoclean)
> ext3                   56544   0  (autoclean)
> jbd                    34968   0  (autoclean) [ext3]
>
> cat XF86config-4 giver bl.a:
> Section "InputDevice"
>        Identifier      "Configured Mouse"
>        Driver          "mouse"
>        Option          "CorePointer"
>        Option          "Device"                "/dev/psaux"
>        Option          "Protocol"              "PS/2"
>        Option          "Emulate3Buttons"       "true"
>        Option          "ZAxisMapping"          "4 5"
> EndSection
>
> Section "InputDevice"
>        Identifier      "Generic Mouse"
>        Driver          "mouse"
>        Option          "SendCoreEvents"        "true"
>        Option          "Device"                "/dev/input/mice"
>        Option          "Protocol"              "ImPS/2"
>        Option          "Emulate3Buttons"       "true"
>        Option          "ZAxisMapping"          "4 5"
> EndSection
>
> dmesg giver bl.a:
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 11:55:11 Apr 14 2002
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 5 for device 00:04.2
> PCI: Sharing IRQ 5 with 00:04.3
> PCI: Sharing IRQ 5 with 00:0d.0
> usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Found IRQ 5 for device 00:04.3
> PCI: Sharing IRQ 5 with 00:04.2
> PCI: Sharing IRQ 5 with 00:0d.0
> usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 5
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> hub.c: USB new device connect on bus1/1, assigned device number 2
> usb.c: USB device 2 (vend/prod 0x62a/0x0) is not claimed by any active driver.
> hub.c: USB new device connect on bus2/1, assigned device number 2
> hub.c: USB hub found
> hub.c: 4 ports detected
> hub.c: USB new device connect on bus2/2, assigned device number 3
> hub.c: USB hub found
> hub.c: 4 ports detected
> hub.c: USB new device connect on bus2/2/1, assigned device number 4
> usb.c: USB device 4 (vend/prod 0x43d/0xc) is not claimed by any active driver.
> Real Time Clock Driver v1.10e
> ide-floppy driver 0.97.sv
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: linear personality registered as nr 1
> CSLIP: code copyright 1989 Regents of the University of California
> apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
> usb.c: registered new driver usblp
> usb.c: ignoring set_interface for dev 4, iface 0, alt 0
> printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0
> printer.c: v0.8:USB Printer Device Class driver
> usb.c: registered new driver usbscanner
> scanner.c: 0.4.6:USB Scanner Driver
> usb.c: registered new driver keyboard
> usbkbd.c: :USB HID Boot Protocol keyboard driver
> inserting floppy driver for 2.4.18-686
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> loop: loaded (max 8 devices)
> PPP generic driver version 2.4.1
> usb.c: registered new driver serial
> usbserial.c: USB Serial support registered for Generic
> usbserial.c: USB Serial Driver core v1.4
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> usb.c: registered new driver usb_mouse
> usb-uhci.c: interrupt, status 2, frame# 1762
> usb.c: error getting string descriptor 0 (error=-75)
> input0: USB HIDBP Mouse 062a:0000 on usb1:2.0
> usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
> mice: PS/2 mouse device common for all mice
> usb.c: registered new driver hiddev
> usb.c: registered new driver hid
> hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
> hid-core.c: USB HID support drivers
>
> Hvad mangler ? Ifølge hvad jeg kan finde på nettet burde den fungere, men det 
> gør den overhovedet ikke.
>
> Med venlig hilsen
> Axel Egeløv
>
>
>
>