sslug-teknik team mailing list archive

[Carsten Holck <cholck@xxxxxxxxxxx>]

Jan Jensen wrote:
> > > Carsten (eller en anden) - kan jeg lokke dig til
........

> > Det har jeg lige prøvet det er intet problem
>
>
> Tak for testen. Hmmm... kan jeg lokke dig til at
> offentliggøre eller sende mig din X config fil ? Kunne
> være interessant at se om vi har forskelle.

Jeg har en AOC LM-500 fladskærm koblet på og et Compaq DK tastaur ( til 
99.-)

X version 4.2.0 kompileret fra src med PMM i810 patch
ellers RH8.0 opdateret fra RH7.3 (svjh) med KDE3.1 (også fra src)

Here we goes:

<XF86Config>
# File generated by anaconda.

Section "ServerLayout"
	Identifier     "Anaconda Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "dri"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
#	Option	"AutoRepeat"	"500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "dk"
	Option	    "XkbVariant" "basic"	
#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "LM-500"
	HorizSync    30.0 - 62.0
	VertRefresh  50.0 - 75.0
	ModeLine     "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 
+hsync +vsync
	ModeLine     "1400x1050" 151.0 1400 1464 1656 1960 1050 1051 1054 1100 
+hsync +vsync
	ModeLine     "1400x1050" 162.0 1400 1464 1656 1960 1050 1051 1054 1100 
+hsync +vsync
	ModeLine     "1400x1050" 184.0 1400 1464 1656 1960 1050 1051 1054 1100 
+hsync +vsync
	Option	    "dpms"        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
EndSection

Section "Device"
	# no known options
        #BusID
	Identifier  "Intel 810"
	Driver      "i810"
	VendorName  "Intel 810"
	BoardName   "Intel 810"
	Option "XvMCSurfaces" "6"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Intel 810"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Intel 810"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

</XF86Config>

God fornøjelse

/carsten