sslug-teknik team mailing list archive

[John Mørck Hansen <john@xxxxxxxxxx>]

On 06 May 2003 20:02:25 +0200
Peter Toft <pto@xxxxxxxxxxx> wrote:
> 
> Ok - noget ala følgende som også går galt
> 
> $ transcode -i canon/2003-05-03/MVI_0173.AVI -y mpeg -o yt.mpg
> transcode v0.6.4 (C) 2001-2003 Thomas Östreich
> [transcode] auto-probing source canon/2003-05-03/MVI_0173.AVI (ok)
> [transcode] V: import format    | MJPG RIFF data, AVI (V=ffmpeg|A=avi)
> [transcode] V: import frame     | 320x240  1.33:1
> [transcode] V: bits/pixel       | 1.562
> [transcode] V: encoding fps     | 15.000
> [transcode] V: Y'CbCr           | YV12/I420
> [transcode] A: import format    | 0x1     PCM          [11024, 8,1]  
> 88 kbps
> [transcode] A: export format    | 0x50    MPEG layer-2 [11024, 8,1] 
> 128 kbps
> [transcode] A: bytes per frame  | 733 (734.925984)
> [transcode] A: adjustment       | 1928@1000
> [transcode] V: IA32 accel mode  | 3dnow (3dnow mmxext mmx asm)
> [transcode] V: video buffer     | 10 @ 320x240
> [import_avi.so] v0.4.2 (2002-05-24) (video) * | (audio) *
> [import_ffmpeg.so] v0.1.3 (2003-04-08) (video) FFMPEG API (build
> 4655): MS MPEG4v1-3/MPEG4/MJPEG
> [export_mpeg.so] v1.2.1 (2002-06-05) (video) MPEG 1/2 | (audio) MPEG 1
> Layer II
> [import_avi.so] format=0x1, rate=11024 Hz, bits=8, channels=1,
> bitrate=88
> 
> INFO: using reference profile (MPEG1)
> INFO: profile type is (PAL)
> [export_mpeg.so] could not open mpa codec !
> (encoder.c) audio export module error: open failed
> critical error: failed to open output - exit

Du mangler at installerer noget software !!!
 

> Jeg gætter på I også gerne vil se følgende
> 
> $ ls -1 `tcmodinfo -p`/export*.so
> /usr/lib/transcode/export_ac3.so*
> /usr/lib/transcode/export_af6.so*
> /usr/lib/transcode/export_divx4raw.so*
> /usr/lib/transcode/export_divx4.so*
> /usr/lib/transcode/export_divx5raw.so*
> /usr/lib/transcode/export_divx5.so*
> /usr/lib/transcode/export_dvraw.so*
> /usr/lib/transcode/export_dv.so*
> /usr/lib/transcode/export_fame.so*
> /usr/lib/transcode/export_ffmpeg.so*
> /usr/lib/transcode/export_im.so*
> /usr/lib/transcode/export_jpg.so*
> /usr/lib/transcode/export_lame.so*
> /usr/lib/transcode/export_lzo.so*
> /usr/lib/transcode/export_mjpeg.so*
> /usr/lib/transcode/export_mov.so*
> /usr/lib/transcode/export_mp2enc.so*
> /usr/lib/transcode/export_mpeg2enc.so*
> /usr/lib/transcode/export_mpeg.so*
> /usr/lib/transcode/export_net.so*
> /usr/lib/transcode/export_null.so*
> /usr/lib/transcode/export_ogg.so*
> /usr/lib/transcode/export_pcm.so*
> /usr/lib/transcode/export_ppm.so*
> /usr/lib/transcode/export_raw.so*
> /usr/lib/transcode/export_sampeg.so*
> /usr/lib/transcode/export_toolame.so*
> /usr/lib/transcode/export_wav.so*
> /usr/lib/transcode/export_xvidcvs.so*
> /usr/lib/transcode/export_xvidraw.so*
> /usr/lib/transcode/export_xvid.so*
> /usr/lib/transcode/export_yuv4mpeg.so*


De moduler er kun en interface til den rigtige decode/encode driver. Så
de fortæller ingenting!.

Jeg kan forestille mig at du har rimelig styr på din Linux maskine. Men
aligevel... har du checket at du har installeret de software pakker du
prøver at bruge f.eks. xvid, ogg, af6 mv.

(John =;-)
-- 
Din sikre vej til en sikker backup løsning til dit netværk.
Hurtigt, nemt og bekvemt
http://www.adilock.dk/~john/albackup/
http://www.adilock.dk