sslug-teknik team mailing list archive

[Preben Mikael Bohn <preben@xxxxxxx>]

Hej alle, jeg har et lille/stort problem med min CDR-brænder/cdrecord... 
Jeg får følgende fejl, efter at alt er brændt og cdrecord begynder at 
"fixere"...

cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)

Jeg bruger MDK 9.1 og har en HP-8100+ IDE brænder...

Er der nogen der kan fortælle mig hvad jeg gør galt???

Jeg har prøvet med tre (700MB) medier, og de giver alle den samme fejl 
(men det skal siges at de alle er af samme type, har ikke lige andre ved 
hånden)...

Med venlig hilsen Preben

PS. Alt fra cdrecord:

[root@localhost pmb]# cdrecord -v speed=4 dev=0,0,0 
KNOPPIX_V3.2-2003-07-26-EN.iso

Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg 
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8100 '
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO
Supported modes: TAO PACKET SAO
Drive buf size : 1040128 = 1015 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   693 MB
Total size:      796 MB (78:56.52) = 355239 sectors
Lout start:      797 MB (78:58/39) = 355239 sectors
Current Secsize: 2048
  ATIP start of lead in:  -11655 (97:26/45)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 6
Manufacturer: FUJI Photo Film Co., Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 4610
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:  693 of  693 MB written (fifo 100%) [buf  99%]   4.2x.
Track 01: Total bytes read/written: 727525376/727525376 (355237 sectors).
Writing  time: 1188.594s
Average write speed   4.0x.
Min drive buffer fill was 99%
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 93.632s timeout 480s
cmd finished after 93.632s timeout 480s
Fixating time:   93.638s
cdrecord: fifo had 11460 puts and 11460 gets.
cdrecord: fifo was 0 times empty and 11385 times full, min fill was 95%.